4 layers69.5 × 90 mm
6 layers63.2 × 82.3 mm
SuperSamFPGA
jimbro1000/SuperSamFPGASamX8 design expanded to leverage basic FPGA instead of CPLD
- Size
- 63.2 × 82.3 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 292
- Pads
- 861
- Tracks, vias
- 1,846, 399
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Apr 2026
- Updated
- 6 Jun 2026
Overview
SuperSamFPGA is an open-source printed circuit board by jimbro1000, from the jimbro1000/SuperSamFPGA repository on GitHub. It is a 6-layer board of 63.2 × 82.3 mm with 105 parts on 292 nets, routed with 1,846 tracks and 399 vias.
It is built around the SN74AC17PWRQ1, NCP1529ASN and TXS0104EPW, with the 74LVC573AD, AT28BV64B-20JU and CY7C10612G30-10ZSXI among its other parts. Its parts include 43 capacitors, 19 resistors, 13 ICs, 8 connectors and 3 inductors. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
8
SN74AC17PWRQ1
TSSOP-14-40℃~+125℃ 1.5V~6V 24mA 24mA 2uA 6 74AC 8.2ns@5V,50pF Push-pull Schmitt trigger Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
NCP1529ASN
TSOP-5-40℃~+85℃ 1 1.7MHz 1A 2.7V~5.5V 28uA 900mV~3.9V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting Step-down type Yes TSOP-5 DC-DC Converters ROHSonsemiDC-DC ConvertersTXS0104EPW
TSSOP-14-40℃~+85℃ 1 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
74LVC573AD
SOIC-20-300mil-40℃~+125℃ 1.4ns 1.65V~3.6V 1.7ns 3.4ns 74LVC 8 D Latch Tri-State SOIC-20-300mil Latches ROHSNexperiaLatches
AT28BV64B-20JU
PLCC-32(11.43x13.97)-40℃~+85℃ 10 Years 100,000 cycles 10ms 2.7V~3.6V 64Kbit Hardware write protection function、Software write protection function Parallel Port (Parallel) PLCC-32(11.4x14) EEPROM ROHSMicrochip TechnologyEEPROM
CY7C10612G30-10ZSXI
TSOPII-54-10.2mmTSOPII-54-10.2mm SRAM ROHSInfineon TechnologiesSRAM
TPS563201
UncategorisedTexas Instruments
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C10, C11, C12, C13, C14, C15, C16, C17, C19, C20, C21, C22, C23, C25, C29 +9 |
| 13 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C9, C30, C31, C33, C34, C35, C36, C37, C41, C42 |
| 9 | 470R | PCM_Resistor_SMD_AKL:R_Array_Convex_4x0402 | RN4, RN5, RN6, RN10, RN11, RN12, RN13, RN14, RN15 |
| 5 | 4.7K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R1, R2, R3, R4, R5 |
| 3 | 100uF | Capacitor_SMD:C_0805_2012Metric | C18, C26, C27 |
| 3 | 1K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R6, R7, R11 |
| 3 | 220R | PCM_Resistor_SMD_AKL:R_Array_Convex_4x0402 | RN7, RN8, RN9 |
| 3 | 33R | PCM_Resistor_SMD_AKL:R_Array_Convex_4x0402 | RN1, RN2, RN3 |
| 3 | 470R | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R8, R9, R10 |
| 2 | 100K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R16, R18 |
| 2 | 150K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R14, R17 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C38, C39 |
| 2 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | NCP1529A | Package_TO_SOT_SMD:SOT-23-5 | U13, U14 |
| 2 | SN74AC17PWR | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U6, U7 |
| 2 | TXS0104EPW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U11, U12 |
| 1 | 10K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R13 |
| 1 | 33K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R19 |
| 1 | 4.7K | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R12 |
| 1 | 4.7uH | Inductor_SMD:L_6.3x6.3_H3 | L3 |
| 1 | 74LVC573 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | 75K | PCM_Resistor_SMD_AKL:R_0402_1005Metric | R15 |
| 1 | AT28BV64B-20JU | Package_LCC:PLCC-32_THT-Socket | U9 |
| 1 | AddressBus | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | BusService | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | CY7C10612G30-10ZSXI | PCM_Package_SO_AKL:TSOP-II-54_22.2x10.16mm_P0.8mm | U8 |
| 1 | ControlIn | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | ControlOut | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | DataBus | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MX25L6433F | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RomAddr | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | SiT8008xx-2x-xxS | Oscillator:Oscillator_SMD_SiT_PQFN-4Pin_3.2x2.5mm | Y1 |
| 1 | TPS563201 | Package_TO_SOT_SMD:SOT-23-6 | U15 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 1 | Tactile | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | Video | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | XC7A15T-CSG325 | Package_BGA:BGA-324_15x15mm_Layout18x18_P0.8mm | U2 |
Similar boards
- 2 layers83.5 × 59 mm
ESP32Breakout
GadgetReboot/ESP32_5V_Dev_Board
ESP32 dev board with on board 3.3v to 5v buffers to some external pins, PT8211 I2S DAC, and Micro SD Card Socket
37 parts1 - 2 layers51 × 60.7 mm
- 6 layers141.7 × 105.1 mm
NuBoard
wickerwaka/nuBoard
Verified 2026-09-24 with KiCad 10.0.6. Open nuBoard.kicadpcb in this directory to inspect the result. This is a PCB-only candidate, separate from the main-board schematic and PCB.
330 parts1 - 4 layers72.4 × 70.2 mm
- 4 layers223.3 × 120.1 mm
ISA FPGA v2
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
132 parts78 - 2 layers160 × 114.3 mm
VGAGAL
flypie/Ace-2019
Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…
77 parts13GPL-3.0 - 2 layers254 × 134.6 mm
S100 80386 SRAM V6
CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.
98 parts
Questions
How big is the SuperSamFPGA PCB?
It measures 63.2 × 82.3 mm and has 6 copper layers, 1.6 mm thick.
What parts does the SuperSamFPGA use?
105 parts, built around the SN74AC17PWRQ1, NCP1529ASN, TXS0104EPW and 74LVC573AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperSamFPGA KiCad files?
From the jimbro1000/SuperSamFPGA repository on GitHub, at the commit this page was made from: the board is SuperSamFPGA.kicad_pcb and its schematic SuperSamFPGA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperSamFPGA design in my own project?
Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.