Skip to the content
123

MMBT2907ALT1G

onsemiExtended

-55℃~+150℃ 1 PNP 1.6V 10nA 200MHz 350mW 5V 600mA 60V 75 PNP SOT-23 Bipolar (BJT) ROHS

Part id
onsemi/MMBT2907ALT1G
Category
Bipolar (BJT)
Package
SOT-23
Pins
3
In stock
262,000 at JLCPCB (C40752)
Used on
6 open-source boards

Overview

The MMBT2907ALT1G is a bipolar made by onsemi in a SOT-23 package with 3 pins. -55℃~+150℃ 1 PNP 1.6V 10nA 200MHz 350mW 5V 600mA 60V 75 PNP SOT-23 Bipolar (BJT) ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PNP_1B_2E_3C, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 262,000 are in stock at JLCPCB (part C40752). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PNP_1B_2E_3CFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

9
Collector-emitter, most
60 V · Collector-emitter voltage, absolute max · p. 1
Collector current, most
600 mA · Continuous collector current, max · p. 1
Junction, hottest
150 °C · Junction temperature, max · p. 1
Junction to air (SOT−23 (TO−236AB))
556 K/W · Junction-to-ambient, FR− 5 board, max · p. 1
Junction to air (SOT−23 (TO−236AB))
417 K/W · Junction-to-ambient, alumina substrate, max · p. 1
Junction to air (SOT−23 (TO−236AB))
357 K/W · Junction-to-ambient, heat spreader or equivalent, max · p. 1
Current gain, least
75 · DC current gain, IC = −0.1 mAdc, VCE = −10 Vdc, min · p. 2
Current gain, least
100 · DC current gain, IC = −1.0 mAdc, VCE = −10 Vdc, min · p. 2
Current gain, least
50 · DC current gain, IC = −500 mAdc, VCE = −10 Vdc, min · p. 2

What it is and has

2
Transistor type
PNP Silicon · p. 1
Application
General Purpose Transistors · p. 1

Specifications

40
ParameterConditionsAs printedPage
Collector −Emitter Voltage VCEOmax -60 Vdc1
Collector −Base Voltage VCBOmax -60 Vdc1
Emitter −Base Voltage VEBOmax -5 Vdc1
Collector Current − Continuous ICmax -600 mAdc1
Collector Current − Peak (Note 3) ICMReference SOA curvemax -1200 mAdc1
Total Device Dissipation − FR− 5 Board PD(Note 1) @TA = 25°Cmax 225 mW1
Derate above 25°C PDFR− 5 Board (Note 1)max 1.8 mW/°C1
Thermal Resistance, Junction−to−Ambient RJAFR− 5 Board (Note 1)max 556 °C/W1
Total Device Dissipation − Alumina Substrate PD(Note 2) @TA = 25°Cmax 300 mW1
Derate above 25°C PDAlumina Substrate (Note 2)max 2.4 mW/°C1
Thermal Resistance, Junction−to−Ambient RJAAlumina Substrate (Note 2)max 417 °C/W1
Total Device Dissipation − Heat Spreader or equivalent PD(Note 4) @TA = 25°Cmax 350 mW1
Thermal Resistance, Junction−to−Ambient RJAHeat Spreader or equivalent (Note 4)max 357 °C/W1
Junction and Storage Temperature TJ, Tstgmin -55 · max 150 °C1
Collector−Emitter Breakdown Voltage (Note 5) V(BR)CEOTA = 25°C; IC = −1.0 mAdc, IB = 0; pulse testmin -60 Vdc2
Collector−Emitter Breakdown Voltage (Note 5) V(BR)CEOTA = 25°C; IC = −10 mAdc, IB = 0; pulse testmin -60 Vdc2
Collector −Base Breakdown Voltage V(BR)CBOTA = 25°C; IC = −10 Adc, IE = 0min -60 Vdc2
Emitter −Base Breakdown Voltage V(BR)EBOTA = 25°C; IE = −10 Adc, IC = 0min -5 Vdc2
Collector Cutoff Current ICEXTA = 25°C; VCE = −30 Vdc, VEB(off) = −0.5 Vdcmax -50 nAdc2
Collector Cutoff Current ICBOTA = 25°C; VCB = −50 Vdc, IE = 0max -0.01 Adc2
Collector Cutoff Current ICBOVCB = −50 Vdc, IE = 0, TA = 125°Cmax -10 Adc2
Base Cutoff Current IBLTA = 25°C; VCE = −30 Vdc, VEB(off) = −0.5 Vdcmax -50 nAdc2
DC Current Gain hFETA = 25°C; IC = −0.1 mAdc, VCE = −10 Vdcmin 75 −2
DC Current Gain hFETA = 25°C; IC = −1.0 mAdc, VCE = −10 Vdcmin 100 −2
DC Current Gain hFETA = 25°C; IC = −10 mAdc, VCE = −10 Vdcmin 100 −2
DC Current Gain hFETA = 25°C; IC = −150 mAdc, VCE = −10 Vdcmin 100 · max 300 −2
DC Current Gain hFETA = 25°C; IC = −500 mAdc, VCE = −10 Vdc; Note 5, pulse testmin 50 −2
Collector −Emitter Saturation Voltage (Note 5) VCE(sat)TA = 25°C; IC = −150 mAdc, IB = −15 mAdc; pulse testmax -0.4 Vdc2
Collector −Emitter Saturation Voltage (Note 5) VCE(sat)TA = 25°C; IC = −500 mAdc, IB = −50 mAdc; pulse testmax -1.6 Vdc2
Base −Emitter Saturation Voltage (Note 5) VBE(sat)TA = 25°C; IC = −150 mAdc, IB = −15 mAdc; pulse testmax -1.3 Vdc2
Base −Emitter Saturation Voltage (Note 5) VBE(sat)TA = 25°C; IC = −500 mAdc, IB = −50 mAdc; pulse testmax -2.6 Vdc2
Current −Gain − Bandwidth Product (Notes 5, 6) fTTA = 25°C; IC = −50 mAdc, VCE = −20 Vdc, f = 100 MHz; pulse testmin 200 MHz2
Output Capacitance CoboTA = 25°C; VCB = −10 Vdc, IE = 0, f = 1.0 MHzmax 8 pF2
Input Capacitance CiboTA = 25°C; VEB = −2.0 Vdc, IC = 0, f = 1.0 MHzmax 30 pF2
Turn−On Time tonTA = 25°C; VCC = −30 Vdc, IC = −150 mAdc, IB1 = −15 mAdcmax 45 ns2
Delay Time tdTA = 25°C; VCC = −30 Vdc, IC = −150 mAdc, IB1 = −15 mAdcmax 10 ns2
Rise Time trTA = 25°C; VCC = −30 Vdc, IC = −150 mAdc, IB1 = −15 mAdcmax 40 ns2
Turn−Off Time toffTA = 25°C; VCC = −6.0 Vdc, IC = −150 mAdc, IB1 = IB2 = −15 mAdcmax 100 ns2
Storage Time tsTA = 25°C; VCC = −6.0 Vdc, IC = −150 mAdc, IB1 = IB2 = −15 mAdcmax 80 ns2
Fall Time tfTA = 25°C; VCC = −6.0 Vdc, IC = −150 mAdc, IB1 = IB2 = −15 mAdcmax 30 ns2

Pins, by the datasheet

3
1 BASE
Base. · p. 6
2 EMITTER
Emitter. · p. 6
3 COLLECTOR
Collector. · p. 6

Ordering codes, by the datasheet

4
MMBT2907ALT1G
SOT−23 (Pb−Free) · 3000 / Tape & Reel · p. 1
SMMBT2907ALT1G
SOT−23 (Pb−Free) · S prefix for automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable; 3000 / Tape & Reel · p. 1
MMBT2907ALT3G
SOT−23 (Pb−Free) · 10,000 / Tape & Reel · p. 1
SMMBT2907ALT3G
SOT−23 (Pb−Free) · S prefix for automotive and other applications requiring unique site and control change requirements; AEC−Q101 qualified and PPAP capable; 10,000 / Tape & Reel · p. 1

Open-source boards using it

6
  • 2 layers137.2 × 83.8 mmGeneralPurposeAlarmDevicePCB, the printed circuit board in 3D

    GeneralPurposeAlarmDevicePCB

    PubInv/general-purpose-alarm-device

    A general purpose alarm device (with software) as a module for medical devices (and others)

    140 parts7AGPL-3.0
  • 4 layers25 × 37.3 mmLinKey, the printed circuit board in 3D

    LinKey

    Konkzor/LinKey

    Une clé WIFI lisant la sortie TIC du Linky connectée au broker MQTT d'un Home Assistant

    42 parts1CERN-OHL-W-2.0
  • 2 layers100 × 100 mmCan ssr, the printed circuit board in 3D

    Can ssr

    czalinski/ThlHats

    Test devices with Raspberry PI HAT form factor

    201 partsMIT
  • 4 layers63.5 × 44.5 mmClock Controller, the printed circuit board in 3D

    Clock Controller

    Fish-in-a-Barrel/Nixie

    This is my Nixie clock project. It was created as an excuse to learn more about electronics and it touches on power circuits, microcontrollers, serial communications, and more.

    48 parts
  • 2 layers21 × 9 mmFanPWMtoRotorLock, the printed circuit board in 3D

    FanPWMtoRotorLock

    mlh5599/FanPWMtoRotorLock

    Converts the output from a 12v PWM fan to a rotor lock detector signal

    13 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MMBT2907ALT1G?

Yes. The symbol is Pinmap_Generic:Q_PNP_1B_2E_3C and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMBT2907ALT1G?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the MMBT2907ALT1G datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MMBT2907ALT1G?

JLCPCB lists it as part C40752, with 262,000 in stock; the sellers' links on this page open their listings.

What can replace the MMBT2907ALT1G?

Parts like it in the library: the MMBT2222A by STMicroelectronics, the 2N5551S-RTK/P by KEC Semicon, the MMBT8050D by STMicroelectronics and the MMBT2222A by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MMBT2907ALT1G?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.