4 layers224 × 395 mm
FEAR-16 - Mainboard
Dephrilibrium/FE-FEAR16v2-PCB-Mainboard
Regulation circuit mainboard of the Field Emission Array Regulation (FEAR) system with up to 16 channels.
424 parts1GPL-3.0
HCPL-2631
onsemiExtended
SOP-8 Logic Output Optoisolators ROHS
- Part id
- onsemi/HCPL-2631
- Category
- Logic Output Optoisolators
- Package
- SOP-8
- Pins
- 8
- In stock
- 0 at JLCPCB (C3038757)
- Used on
- 4 open-source boards
Overview
The HCPL-2631 is a logic Output Optoisolator made by onsemi in a SOP-8 package with 8 pins. SOP-8 Logic Output Optoisolators ROHS.
PCBKit's library has its KiCad symbol (Isolator:HCPL-2631, from KiCad's library) and its footprint (Package_SO:SOP-8_3.76x4.96mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3038757). 4 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Passive |
| 2 | C1 | Passive |
| 3 | C2 | Passive |
| 4 | A2 | Passive |
| 5 | GND | Power in |
| 6 | VO2 | Open collector |
| 7 | VO1 | Open collector |
| 8 | VCC | Power in |
Open-source boards using it
4- 2 layers41 × 56 mm
Gripper xiao2040
edwinDOS/pcb_gofa_gripper
This repository contains the PCB design for the ABB GOFA Gripper at UC3M
25 parts1MIT - 2 layers140 × 140 mm
- 2 layers58.5 × 45.5 mm
GripperGoFa ArduinoNano
edwinDOS/pcb_gofa_gripper
This repository contains the PCB design for the ABB GOFA Gripper at UC3M
20 parts1MIT
Parts like it
8
6N137S
SOP-8-40℃~+85℃ 1 1.8V 100mW 10Mbps 10kV/us 2.5kV 4.5V~5.5V 50mA 5V 5mA 75ns 75ns DC SOP-8 Logic Output Optoisolators ROHSUMWLogic Output OptoisolatorsEL0611(TA)-V
SOP-8Logic Output OptoisolatorsEverlight ElectronicsHCPL-0314-500E
SOP-8-40℃~+100℃ 1 1.5V 10V~30V 12mA 250mW 3.75kV 35kV/us 500mA 5V 700ns 700ns 7mA DC SOP-8 Logic Output Optoisolators ROHSBroadcom LimitedLogic Output OptoisolatorsHCPL-0453-500E
SOP-8-55℃~+100℃ 1 1.7V 100mW 15% 16mA 1Mbit/s 25mA 3.75kV 30kV/us 4.5V~15V 5V 800ns 800ns DC SOP-8 Logic Output Optoisolators ROHSBroadcom LimitedLogic Output OptoisolatorsHCPL-0454-500E
SOP-8-55℃~+100℃ 1 1.5V 15kV/us 21% 25mA 3.75kV 4.5V~15V 500ns 5V 700ns 8mA DC SOP-8 Logic Output Optoisolators ROHSBroadcom LimitedLogic Output OptoisolatorsLTV-0601
SOP-8-40℃~+85℃ 1 1.38V 15Mbps 15kV/us 2.7V~3.6V、4.5V~5.5V 20mA 3.75kV 50mA 5V 5mA 75ns 85mW 90ns DC SOP-8 Logic Output Optoisolators ROHSLite-OnLogic Output OptoisolatorsTLP2160(TP,F)
SOP-8-40℃~+125℃ 1.55V 10mA 2 2.5kV 2.7V~5.5V 20Mbps 20kV/us 25mA 3.5mA 40ns 40ns 5V 60mW DC SOP-8 Logic Output Optoisolators ROHSToshibaLogic Output OptoisolatorsEL0530
SOP-8Logic Output OptoisolatorsAOTE
Questions
Is there a KiCad symbol and footprint for the HCPL-2631?
Yes. The symbol is Isolator:HCPL-2631 and the footprint Package_SO:SOP-8_3.76x4.96mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the HCPL-2631?
SOP-8, with 8 pins. Its footprint is drawn on this page.
Where can I order the HCPL-2631?
JLCPCB lists it as part C3038757, with 0 in stock; the sellers' links on this page open their listings.
What can replace the HCPL-2631?
Parts like it in the library: the 6N137S by UMW, the EL0611(TA)-V by Everlight Electronics, the HCPL-0314-500E by Broadcom Limited and the HCPL-0453-500E by Broadcom Limited. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the HCPL-2631?
4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.