Skip to the content
12345678

6N137S

UMWExtended

-40℃~+85℃ 1 1.8V 100mW 10Mbps 10kV/us 2.5kV 4.5V~5.5V 50mA 5V 5mA 75ns 75ns DC SOP-8 Logic Output Optoisolators ROHS

Part id
umw/6N137S
Category
Logic Output Optoisolators
Package
SOP-8
Pins
8
In stock
28,163 at JLCPCB (C5123515)
Used on
6 open-source boards

Overview

The 6N137S is a logic Output Optoisolator made by UMW in a SOP-8 package with 8 pins. -40℃~+85℃ 1 1.8V 100mW 10Mbps 10kV/us 2.5kV 4.5V~5.5V 50mA 5V 5mA 75ns 75ns DC SOP-8 Logic Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Isolator:6N137, from KiCad's library) and its footprint (Package_SO:SOP-8_3.76x4.96mm_P1.27mm, from KiCad's library), ready for a KiCad board. 28,163 are in stock at JLCPCB (part C5123515). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

1NC2A3C4NC5GND6VO7EN8VCC
Isolator:6N137From KiCad's library

Footprint

12345678
Package_SO:SOP-8_3.76x4.96mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
4.5 V · VCC, recommended operating, min · p. 4
Supply, most
5.5 V · VCC, recommended operating, max · p. 4
Supply, absolute maximum
7 V · VCC, absolute maximum · p. 3
Works from
-40 °C · operating ambient, min · p. 3
Works up to
85 °C · operating ambient, max · p. 3
Takes working
9 mA · VCC = 5.5 V, IF = 10 mA, output low, typical · p. 5
Takes at most
13 mA · VCC = 5.5 V, IF = 10 mA, output low, max · p. 5
A pin gives at most
50 mA · detector output sink current, absolute maximum · p. 3
Data rate, most
10 Mbit/s · data rate, max · p. 1
Edge
12 ns · output fall time, RL = 350 Ω, CL = 15 pF, typical · p. 6

Open-source boards using it

6
  • 4 layers194 × 94 mmBottom board, the printed circuit board in 3D

    Bottom board

    mod-audio/hw-mod-dwarf

    Hardware project of MOD Dwarf

    319 parts6
  • 4 layers99.8 × 99.8 mmGapstorm retro, the printed circuit board in 3D

    Gapstorm retro

    G-EDM/Gapstorm-Pro

    G-EDM Gapstorm Pro - Pulseboard PCB files including BoM, Kicad files, Gerber files and Pick&Place file

    137 parts3
  • 2 layers196.2 × 67.3 mmRelControll v1.1 fix, the printed circuit board in 3D

    RelControll v1.1 fix

    sevenist/SevenistController-VTM-Hardware

    Custom PCB for the Sevenist Controller, a 64-track MIDI CC control surface built around an ESP32-S3 Zero.

    38 partsGPL-3.0
  • 2 layers172 × 140.5 mmBottom board, the printed circuit board in 3D

    Bottom board

    mod-audio/mod-hw-duo

    Hardware project of MOD Duo

    255 parts1
  • 2 layers165.1 × 80.6 mmFuse, the printed circuit board in 3D

    Fuse

    Staybq/FP

    89 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 6N137S?

Yes. The symbol is Isolator:6N137 and the footprint Package_SO:SOP-8_3.76x4.96mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 6N137S?

SOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the 6N137S datasheet?

UMW publishes it: the Datasheet link on this page opens it.

Where can I order the 6N137S?

JLCPCB lists it as part C5123515, with 28,163 in stock; the sellers' links on this page open their listings.

What can replace the 6N137S?

Parts like it in the library: the 6N137(SL)(T1)-GV by miracle, the 6N137S by GOODWORK, the SL0601 by Slkor and the AT0631-CUH-S by AOTE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 6N137S?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.