
ClumsyMIDI
gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display
onsemiExtended
-40℃~+85℃ 1 1.2V 1.6mA 16V 1Mbit/s 250mW 30mA 3V~15V 4.17kV 4us 4us 50mA 6V DC DIP-6 Logic Output Optoisolators ROHS
The H11L1M is a logic Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 1 1.2V 1.6mA 16V 1Mbit/s 250mW 30mA 3V~15V 4.17kV 4us 4us 50mA 6V DC DIP-6 Logic Output Optoisolators ROHS.
PCBKit's library has its KiCad symbol (Isolator:H11L1, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 48,221 are in stock at JLCPCB (part C16587). 17 open-source boards in 11 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum Working Insulation Voltage VIORM | max 850 Vpeak | 3 | |
| Highest Allowable Over-Voltage VIOTM | max 6000 Vpeak | 3 | |
| External Creepage | min 7 mm | 3 | |
| External Clearance | min 7 mm | 3 | |
| Distance Through Insulation (Insulation Thickness) DTI | min 0.5 mm | 3 | |
| Case Temperature(1) TS | Safety limit in the event of a failure | max 175 °C | 3 |
| Input Current(1) IS,INPUT | Safety limit in the event of a failure | max 350 mA | 3 |
| Output Power(1) PS,OUTPUT | Safety limit in the event of a failure | max 800 mW | 3 |
| Storage Temperature TSTG | Total Device | min -40 · max 125 °C | 4 |
| Operating Temperature TOPR | Total Device | min -40 · max 85 °C | 4 |
| Junction Temperature TJ | Total Device | min -40 · max 125 °C | 4 |
| Lead Solder Temperature TSOL | 10 seconds | max 260 °C | 4 |
| Total Device Power Dissipation at 25°C PD | Total Device; TA = 25°C | max 250 mW | 4 |
| Derate Above 25°C | Total Device | max 2.94 mW/°C | 4 |
| Continuous Forward Current IF | Emitter; TA = 25°C | max 30 mA | 4 |
| Reverse Voltage VR | Emitter; TA = 25°C | max 6 V | 4 |
| Forward Current – Peak (1 us pulse, 300 pps) IF(pk) | Emitter; TA = 25°C | max 100 mA | 4 |
| LED Power Dissipation PD | Emitter; TA = 25°C | max 60 mW | 4 |
| Detector Power Dissipation PD | Detector; TA = 25°C | max 150 mW | 4 |
| V45 Allowed Range VO | Detector; TA = 25°C | min 0 · max 16 V | 4 |
| V65 Allowed Range VCC | Detector; TA = 25°C | min 3 · max 16 V | 4 |
| I4 Output Current IO | Detector; TA = 25°C | max 50 mA | 4 |
| Input Forward Voltage VF | IF = 10 mA; H11L1M; TA = 25°C | typ 1.2 · max 1.5 V | 5 |
| Input Forward Voltage VF | IF = 0.3 mA; H11L1M; TA = 25°C | min 0.75 · typ 1 V | 5 |
| Reverse Current IR | VR = 3 V; H11L1M; TA = 25°C | max 10 uA | 5 |
| Capacitance CJ | V = 0, f = 1.0 MHz; H11L1M; TA = 25°C | max 100 pF | 5 |
| Operating Voltage Range VCC | H11L1M; TA = 25°C | min 3 · max 15 V | 5 |
| Supply Current ICC(off) | IF = 0, VCC = 5 V; H11L1M; TA = 25°C | typ 1.6 · max 5 mA | 5 |
| Output Current, High IOH | IF = 0, VCC = VO = 15 V; H11L1M; TA = 25°C | max 100 uA | 5 |
| Supply Current ICC(on) | IF = 10 mA, VCC = 5 V; H11L1M; TA = 25°C | typ 1.6 · max 5 mA | 5 |
| Output Voltage, Low VOL | RL = 270 Ω, VCC = 5 V, IF = IF(on) max.; H11L1M; TA = 25°C | typ 0.2 · max 0.4 V | 5 |
| Turn-On Threshold Current(2) IF(on) | RL = 270 Ω, VCC = 5 V; H11L1M; TA = 25°C | max 1.6 mA | 5 |
| Turn-Off Threshold Current IF(off) | RL = 270 Ω, VCC = 5 V; H11L1M; TA = 25°C | min 0.3 · typ 1 mA | 5 |
| Hysteresis Ratio IF(off) / IF(on) | RL = 270 Ω, VCC = 5 V; H11L1M; TA = 25°C | min 0.5 · typ 0.75 · max 0.9 | 5 |
| Turn-On Time ton | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C; H11L1M | typ 1 · max 4 us | 5 |
| Fall Time tf | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C; H11L1M | typ 0.1 us | 5 |
| Turn-Off Time toff | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C; H11L1M | typ 1.2 · max 4 us | 5 |
| Rise Time tr | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C; H11L1M | typ 0.1 us | 5 |
| Data Rate | H11L1M; TA = 25°C | typ 1 MHz | 5 |
| Input-Output Isolation Voltage VISO | t = 1 Minute; TA = 25°C | min 4170 VACRMS | 5 |
| Isolation Capacitance CISO | VI-O = 0 V, f = 1 MHz; TA = 25°C | typ 0.4 · max 0.6 pF | 5 |

gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display

balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.

sstojos/zynthian-miniature
The basic PCB with MIDIs, Sound Card and 4 encoders only for zynthian.

rcarmo/openscad-minidexed-rpi3a
A case for a MiniDexed synthesizer based on a Raspberry Pi 3A

sstojos/zynthian-mini
Zynthian Mini is minimalistic approach to build zynthian synthesizer. It is based on latest V5 zynthian version. More information about zynthian can be found here : https://zynthian.org/

joshnishikawa/MomiPlug
A few files written for one specific MIDI controller (mainly for reference).

KrasForge/Courant
A 2D finite-difference physical-modeling synthesis engine in structural VHDL: a vibrating membrane/plate/gong solved on FPGA fabric, with a nonlinear chaos term, playable polyphonically over MIDI/CV.

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
Yes. The symbol is Isolator:H11L1 and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
DIP-6, with 6 pins. Its footprint is drawn on this page.
onsemi publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C16587, with 48,221 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SLH11L1 by Slkor, the H11L1 by Everlight Electronics, the H11L2M by onsemi and the H11L2TVM by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
17 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.