
ClumsyMIDI
gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display

Zynthian Mini is minimalistic approach to build zynthian synthesizer. It is based on latest V5 zynthian version. More information about zynthian can be found here : https://zynthian.org/
Zynthian mini is an open-source printed circuit board by sstojos, from the sstojos/zynthian-mini repository on GitHub. It is a 2-layer board of 163 × 120 mm with 87 parts on 100 nets, routed with 897 tracks and 47 vias.
It is built around the 74HCT14D and H11L1M. Its parts include 39 capacitors, 20 switches, 8 resistors, 2 ICs and 2 connectors.
THIS IS AN OLD reposiotry OF ZYNTHIAN MINI !!!
Zyntian MINI is not any more maintained here.
Zynthian MINI is now merged to zynthian-hw repository. You can find latest verison of zynthian mini inside forked repository of zynthian-hw inside MINI_V2 folder.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100n | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +8 |
| 20 | SW_Push | project-footprints:push-button | SW1, SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +4 |
| 8 | 10n | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C28, C29, C30, C35, C36, C37, C38, C39 |
| 5 | 100n | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C2, C3, C5, C6, C7 |
| 5 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4, R5, R6 |
| 4 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | Enc1, Enc2, Enc3, Enc4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | MCP23017_SP | Package_DIP:DIP-28_W7.62mm | MCPMCP23017_SP1, MCPMCP23017_SP2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 470u 10V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 74HCT14 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | GY-PCM5102 | project-footprints:GY-PCM5102 | A1 |
| 1 | H11L1M | Package_DIP:DIP-6_W7.62mm | U2 |
| 1 | MIDI In Jack | project-footprints:MultiDIN5 | MIDI-IN-J1 |
| 1 | MIDI Out Jack | project-footprints:MultiDIN5 | MIDI-OUT-J1 |
| 1 | MIDI Thru Jack | project-footprints:MultiDIN5 | MIDI-THRU-J1 |
| 1 | MINI v2 | project-footprints:Zynthian Logo Mask | G*** |
| 1 | NEUTRIK | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J1 |
| 1 | RCA RS-234 | project-footprints:RCA RS-234 | J2 |
| 1 | RPI Connector | project-footprints:raspberry pi 4 HAT | RPi1 |
| 1 | RPI HAT Connector | project-footprints:raspberry pi 4 | HAT1 |
| 1 | aliexpress 5 inch screen | project-footprints:aliexpress 5 inch screen | screen |
The 86 most common of 87 parts.

gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display

sstojos/zynthian-miniature
The basic PCB with MIDIs, Sound Card and 4 encoders only for zynthian.

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.

balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.

rcarmo/openscad-minidexed-rpi3a
A case for a MiniDexed synthesizer based on a Raspberry Pi 3A

joshnishikawa/MomiPlug
A few files written for one specific MIDI controller (mainly for reference).

KrasForge/Courant
A 2D finite-difference physical-modeling synthesis engine in structural VHDL: a vibrating membrane/plate/gong solved on FPGA fabric, with a nonlinear chaos term, playable polyphonically over MIDI/CV.
It measures 163 × 120 mm and has 2 copper layers, 1.6 mm thick.
87 parts, built around the 74HCT14D and H11L1M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sstojos/zynthian-mini repository on GitHub, at the commit this page was made from: the board is hardware-KiCad/zynthian-mini.kicad_pcb and its schematic hardware-KiCad/zynthian-mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sstojos before reusing the design.