
EtherKraken
karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.
NXP SemiconductorsExtended
-40℃~+95℃ 1 2.5V、3.3V 5Mbps 64Byte UART、I2C、SPI TSSOP-16 UART ROHS
The SC16IS740IPW is an UART made by NXP Semiconductors in a TSSOP-16 package with 16 pins. -40℃~+95℃ 1 2.5V、3.3V 5Mbps 64Byte UART、I2C、SPI TSSOP-16 UART ROHS.
PCBKit's library has its KiCad symbol (Interface_UART:SC16IS740, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 36 are in stock at JLCPCB (part C407851). 5 open-source boards in 5 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VDD | Power in |
| 2 | A0/CS | Input |
| 3 | A1/SI | Input |
| 4 | SO | Output |
| 5 | SCL/SCLK | Input |
| 6 | SDA | Input/output |
| 7 | IRQ | Open collector |
| 8 | I2C/SPI | Input |
| 9 | VSS | Power in |
| 10 | RTS | Output |
| 11 | CTS | Input |
| 12 | TX | Output |
| 13 | RX | Input |
| 14 | RESET | Input |
| 15 | XTAL1 | Input |
| 16 | XTAL2 | Output |

karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.




Yes. The symbol is Interface_UART:SC16IS740 and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TSSOP-16, with 16 pins. Its footprint is drawn on this page.
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C407851, with 36 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the XR20M1170IG16-F by MaxLinear and the SC18IM700IPW by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.
5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.