SC18IM700IPW

NXP SemiconductorsExtended

2.4V~3.6V Low-power mode、Fractional baud rate generator TSSOP-16 UART ROHS

Part id: nxp/SC18IM700IPW
Category: UART
Package: TSSOP-16
Pins: 16
In stock: 0 at JLCPCB (C5190389)
Used on: 2 open-source boards

Overview

The SC18IM700IPW is an UART made by NXP Semiconductors in a TSSOP-16 package with 16 pins. 2.4V~3.6V Low-power mode、Fractional baud rate generator TSSOP-16 UART ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:SC18IM700, from CERN's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5190389). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

Analog & Interface:SC18IM700From CERN's library

Footprint

Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

Pinout

The pins of the SC18IM700IPW
Pin	Name	Type
1	GPIO0	Input/output
2	GPIO1	Input/output
3	RST	Input
4	VSS	Power in
5	GPIO2	Input/output
6	GPIO3	Input/output
7	SDA	Input/output
8	SCL	Output
9	RX	Input
10	TX	Output
11	GPIO6	Input/output
12	VDD	Power in
13	WKUP	Input
14	GPIO5	Input/output
15	GPIO4	Input/output
16	GPIO7	Input/output

Parameters

Features: Low-power mode；Fractional baud rate generator
Voltage - Supply: 2.4V~3.6V

Order codes

SC18IM700IPW,112LCSC C5190389
SC18IM700IPW,128LCSC C92458

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/nxp/SC18IM700IPW" title="SC18IM700IPW in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

2 layers155 × 114 mm
IOExpansion
ja1umi/MUTIF09Project
Various design materials for building my 8-bit-microprocessor-based single board computer(s)
198 parts10MIT
2 layers30 × 40.1 mm
I2C232V01
mlab-modules/I2C232V01
The base module is an integrated circuit SC18IM700, who works as a converter I2C / UART. I2C interface acts as the master. I2C can be used to speed 400kbit / Sau UART can be up to 460.8 kbit / s.
31 parts

Parts like it

Questions

Is there a KiCad symbol and footprint for the SC18IM700IPW?

Yes. The symbol is Analog & Interface:SC18IM700 and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SC18IM700IPW?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where can I order the SC18IM700IPW?

JLCPCB lists it as part C5190389, with 0 in stock; the sellers' links on this page open their listings.

What can replace the SC18IM700IPW?

Parts like it in the library: the SC16IS740IPW by NXP Semiconductors and the XR20M1170IG16-F by MaxLinear. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SC18IM700IPW?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.