

Supervisor
EIT Projekt 4 FS16
- Size
- 103.1 × 86.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 110
- Pads
- 504
- Tracks, vias
- 1,207, 104
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Mar 2016
- Updated
- 8 Mar 2020
Overview
Supervisor is an open-source printed circuit board by Yatekii, from the Yatekii/project-powerline repository on GitHub, published under the MIT licence. It is a 2-layer board of 103.1 × 86.6 mm with 110 parts on 110 nets, routed with 1,207 tracks and 104 vias.
It is built around the ACS723LLCTR-10AU-T, MAX11612EUA+ and CD74HC4046AM, with the OPA376AIDCK, SC16IS740IPW and NLSX4373D among its other parts. Its parts include 34 resistors, 25 capacitors, 20 ICs, 15 connectors and 8 diodes.
Main components
7ACS723LLCTR-10AU-T
SOIC-8-40℃~+150℃ 0.65mΩ 10A 2400Vrms 400mV/A 5V 5us 80kHz Not supported SOIC-8 Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsMAX11612EUA+
uMAX-8-40℃~+85℃ 12 1LSB 4 4.5V~5.5V 94.4kHz I2C uMAX-8 Analog to Digital Converters (ADC) ROHSMaxim Integrated (Analog Devices)Analog To Digital Converters (ADCs)CD74HC4046AM
SOIC-16-55℃~+125℃ 2V~6V 38MHz External SOIC-16 Clock Generators, PLLs, Frequency Synthesizers ROHSTexas InstrumentsClock Generators, PLLs, Frequency SynthesizersOPA376AIDCK
SC-70-5-2.75V~-1.1V、1.1V~2.75V -40℃~+125℃ 0.2pA 0.2pA 1 2.2V~5.5V 260nV/℃ 2V/us 30mA 5.5MHz 5uV 7.5nV/√Hz@1kHz 760uA 90dB ESD protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsSC16IS740IPW
TSSOP-16-40℃~+95℃ 1 2.5V、3.3V 5Mbps 64Byte UART、I2C、SPI TSSOP-16 UART ROHSNXP SemiconductorsUARTNLSX4373D
SO-8-40℃~+85℃ 1 1.5V~5.5V 1.5V~5.5V 2 20Mbps Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator SMBus、I2C Tri-State、Open-drain SO-8 Translators, Level Shifters ROHSonsemiTranslators, Level ShiftersULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
README
README.mdpowerline
EIT Projekt 4 FS16
Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R_Small | Resistors_SMD:R_0603 | R25, R26, R27, R30, R34, R35, R36, R39, R57, R58, R59, R62 |
| 9 | 100k | Resistors_SMD:R_0603 | R24, R28, R29, R33, R37, R38, R56, R60, R61 |
| 9 | C_Small | Capacitors_SMD:C_0603 | C20, C23, C24, C26, C29, C30, C43, C46, C47 |
| 5 | CONN_01X03 | pro4:CONNECTOR-relay | P4, P6, P7, P8, P12 |
| 4 | 230V_OUT | Pin_Headers:Pin_Header_Straight_1x02 | P5, P13, P14, P15 |
| 4 | R_Small | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4 |
| 3 | 0.1 uF | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C5 |
| 3 | 0.1u | Capacitors_SMD:C_0603 | C22, C28, C45 |
| 3 | 100n | Capacitors_SMD:C_0603 | C21, C27, C44 |
| 3 | 10k | Resistors_SMD:R_0603 | R22, R31, R54 |
| 3 | ACS723LLCTR-10AU-T | SMD_Packages:SOIC-8-N | IC4, IC5, IC6 |
| 3 | CD74HC4046 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U9, U11, U16 |
| 3 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P9, P10, P11 |
| 3 | C_Small | Pin_Headers:Pin_Header_Straight_1x02 | C19, C25, C42 |
| 3 | D_Schottky_Small | Diodes_SMD:SOD-123 | D6, D7, D8 |
| 3 | Led_Small | LEDs:LED_0603 | D2, D3, D4 |
| 3 | OPA376AIDCK | TO_SOT_Packages_SMD:SC-70-6 | U10, U12, U17 |
| 3 | POT | pro4:EVM-1USX30B14_poti | RV3, RV4, RV7 |
| 3 | SC16IS740IPW | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U1, U2, U3 |
| 3 | x | Resistors_SMD:R_0603 | R23, R32, R55 |
| 2 | 22 | Resistors_SMD:R_0603_HandSoldering | R5, R6 |
| 2 | CP_Small | Capacitors_ThroughHole:C_Radial_D7.5_L11.2_P2.5 | C1, C2 |
| 2 | NLSX4373 | SMD_Packages:SOIC-8-N | IC7, IC8 |
| 2 | RELAY_SERIE_36 | pro4:RELAY_SERIE_36 | K1, K2 |
| 2 | SW_PUSH | Pin_Headers:Pin_Header_Straight_1x02 | SW1, SW2 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C7 |
| 1 | 22 | Resistors_SMD:R_1206_HandSoldering | R7 |
| 1 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C6 |
| 1 | 230V_IN | pro4:CONNECTOR-input | P1 |
| 1 | INDUCTOR_Small | pro4:HC9-large | L1 |
| 1 | LM2596-3.3 | TO_SOT_Packages_SMD:TO-263-5Lead | IC2 |
| 1 | Led_Small | Pin_Headers:Pin_Header_Straight_1x02 | D1 |
| 1 | MAX11612 | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | IC3 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | RASPI-CONNECT | Pin_Headers:Pin_Header_Straight_2x20 | P2 |
| 1 | RF_CONN | gsm:SMA_SMD | U4 |
| 1 | SIM900 | gsm:QFP 68 | IC9 |
| 1 | SIM_HOLDER | gsm:SIM_HOLDER | U5 |
| 1 | ULN2003A | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | IC1 |
| 1 | ZENERsmall | Diodes_SMD:SMB-SMC_Universal_Handsoldering | D5 |
More from Yatekii/project-powerline
2- 2 layers29 × 31 mm

- 2 layers25.7 × 45.5 mm

Similar boards
- 4 layers60.1 × 39.9 mm

NRF24L01 mtr driver
yanntalhouarne/ATMEGA324_MTR_DRV_PCB
Isolated motor driver based around the ATMEGA324PB.
147 parts - 2 layers94.8 × 67.2 mm

- 2 layers271.8 × 172.7 mm

Peripherl bridge panel
Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge
Bridge circuit for several peripheral
1,176 parts - 2 layers91.4 × 33 mm

- 2 layers88.9 × 82.6 mm

- 2 layers87.6 × 100.8 mm

EtherKraken
karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.
84 parts3Apache-2.0 - 2 layers33 × 24 mm

- 2 layers25.4 × 42.9 mm

Questions
How big is the Supervisor PCB?
It measures 103.1 × 86.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Supervisor use?
110 parts, built around the ACS723LLCTR-10AU-T, MAX11612EUA+, CD74HC4046AM and OPA376AIDCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Supervisor KiCad files?
From the Yatekii/project-powerline repository on GitHub, at the commit this page was made from: the board is hardware/supervisor/supervisor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Supervisor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).