Skip to the content
33

PCAL6524HEAZ

NXP SemiconductorsExtended

-40℃~+85℃ 1MHz 24 25mA 2uA 4 800mV~3.6V、1.65V~5.5V I2C、SMBus Interrupt Output Push-Pull、Open-drain Reset function、Cascade and address expansion、Input anti-jitter、Built-in LED driver、IO level configurable HUQFN-32-EP(5x5) I/O Expanders ROHS

Part id
nxp/PCAL6524HEAZ
Category
I, O Expanders
Package
HUQFN-32-EP(5x5)
Pins
33
In stock
56 at JLCPCB (C3000497)
Used on
3 open-source boards

Overview

The PCAL6524HEAZ is an i, O Expander made by NXP Semiconductors in a HUQFN-32-EP(5x5) package with 33 pins. -40℃~+85℃ 1MHz 24 25mA 2uA 4 800mV~3.6V、1.65V~5.5V I2C、SMBus Interrupt Output Push-Pull、Open-drain Reset function、Cascade and address expansion、Input anti-jitter、Built-in LED driver、IO level configurable HUQFN-32-EP(5x5) I/O Expanders ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PCAL6524HEAZ, from EasyEDA) and its footprint (EasyEDA_Cloud:HQFN-32_L5.0-W5.0-P0.50-BL-EP3.0, from EasyEDA), ready for a KiCad board. 56 are in stock at JLCPCB (part C3000497). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1P0_02P0_13P0_24P0_35P0_46P0_57P0_68P0_79P1_010P1_111P1_212P1_313P1_414P1_515P1_616P1_717P2_018P2_119P2_220P2_321P2_422P2_523P2_624P2_725VSS26ADDR27VDD(P)28RESET#29SCL30SDA31VDD(I2C-bus)32INT#33EP
EasyEDA_Cloud:PCAL6524HEAZFrom EasyEDA

Footprint

33
EasyEDA_Cloud:HQFN-32_L5.0-W5.0-P0.50-BL-EP3.0From EasyEDA

From the datasheet

17
Supply, least
800 mV · VDD(I2C-bus), recommended operating min · p. 36
Supply, most
3.6 V · VDD(I2C-bus), recommended operating max · p. 36
Supply, least
1.65 V · VDD(P), recommended operating min · p. 36
Supply, most
5.5 V · VDD(P), recommended operating max · p. 36
Supply, absolute maximum
4 V · VDD(I2C-bus), absolute max · p. 35
Supply, absolute maximum
6.5 V · VDD(P), absolute max · p. 35
Works from
-40 °C · Ambient, operating in free air min · p. 36
Works up to
85 °C · Ambient, operating in free air max · p. 36
Junction, hottest
125 °C · Junction temperature max · p. 35
Takes working
270 µA · sum of IDD(I2C-bus) and IDD(P), typical active continuous read, VDD(P) = 2.3 V to 3.6 V, 1 MHz · p. 38
Takes at most
625 µA · sum of IDD(I2C-bus) and IDD(P), max active continuous read, VDD(P) = 3.6 V to 5.5 V, 1 MHz · p. 38
Takes asleep
2 µA · sum of IDD(I2C-bus) and IDD(P), typical clock stopped, VDD(P) = 2.3 V to 3.6 V · p. 37
A pin gives at most
25 mA · Each I/O externally limited to max 25 mA · p. 38
Junction to air (HUQFN32)
42 K/W · Junction to ambient, JEDEC 2S2P board, typical · p. 36
Data rate, most
1 Mbit/s · Fast-mode Plus I2C, max · p. 45
Takes working
450 µA · Sum of IDD(I2C-bus) and IDD(P), active continuous register read, 1 MHz, VDD(P) = 3.6–5.5 V, typical · p. 38
Junction to air (HUQFN32 package)
42 K/W · Junction to ambient on JEDEC 2S2P board, typical · p. 36

What it is and has

22
GPIO
24-bit general-purpose I/O expander · p. 2
I2C
1 MHz fast-mode plus · p. 3
Reset input
Active LOW RESET · p. 3
Interrupt output
Open-drain active LOW INT · p. 3
Power-on reset
Internal · p. 3
Input noise filter
SCL/SDA · p. 3
Output drive
Latched outputs, 25 mA maximum drive capability · p. 3
Latch-up performance
Exceeds 100 mA per JESD 78, Class II · p. 3
ESD protection
2000 V human-body model (A114-A) · p. 3
ESD protection
1000 V charged-device model (C101) · p. 3
Package options
HUQFN32, VFBGA36 · p. 3
Output configuration
Bank selectable or pin selectable push-pull or open-drain · p. 3
Interrupt status
Read-only source identification register · p. 3
Input latch
Input values retained until input port register is read · p. 3
Internal pull resistors
Selectable 100 kΩ pull-up or pull-down · p. 3
Interrupt edge selection
Per bit · p. 3
Interrupt clear
Individual clear without disturbing other events · p. 3
Interrupt event read
Read all events without clearing · p. 3
Switch debounce
Hardware · p. 3
Software reset
General call · p. 3
Device identification
I2C software device ID · p. 3
General-purpose I/O
24-bit · p. 1

Around it

6
cap 0.1 μF
between VDD(P) and VSS; Required bypass capacitor; locate as close to the package as practical. · p. 24
res not specified
between SCL and VDD(I2C-bus); Pull-up resistor. · p. 5
res not specified
between SDA and VDD(I2C-bus); Pull-up resistor. · p. 5
res not specified
between INT and VDD(I2C-bus) or VDD(P); Pull-up resistor; select either supply. · p. 6
res not specified
between RESET and VDD(I2C-bus); Pull-up resistor if no active connection is used. · p. 6
cap 0.1 uF
between VDD(P) and VSS; Required bypass capacitor; locate as close to the package as practical. · p. 32

Specifications

136
ParameterConditionsAs printedPage
I C-bus supply voltage VDD(I2C-bus)min -0.5 · max 4 V35
Supply voltage port P VDD(P)min -0.5 · max 6.5 V35
Input voltage on all ports VI(P)Ratings may be exceeded if input and output current ratings are observedmin -0.5 · max 6.5 V35
Output voltage on all ports VO(P)Ratings may be exceeded if input and output current ratings are observedmin -0.5 · max 6.5 V35
Input voltage on I C-bus, RESET, ADDR VI(I)min -0.5 · max 4 V35
Output voltage on I C-bus, INT VO(I)min -0.5 · max 4 V35
LOW-level output current IOLContinuous; P port; VO = 0 V to VDD(P)max 50 mA35
LOW-level output current IOLContinuous; SDA, INT; VO = 0 V to VDD(I2C-bus)max 25 mA35
HIGH-level output current IOHContinuous; P port; VO = 0 V to VDD(P)max 25 mA35
Supply current IDDContinuous through VSSmax 200 mA35
Supply current port P IDD(P)Continuous through VDD(P)max 160 mA35
I C-bus supply current IDD(I2C-bus)Continuous through VDD(I2C-bus)max 10 mA35
Storage temperature Tstgmin -65 · max 150 °C35
Maximum junction temperature Tj(max)max 125 °C35
I C-bus supply voltage VDD(I2C-bus)min 0.8 · max 3.6 V36
Supply voltage port P VDD(P)A 0.1 uF bypass capacitor is required on VDD(P) pin as close to the package as practicalmin 1.65 · max 5.5 V36
HIGH-level input voltage VIHSCL, SDA, RESET, ADDR; VDD(I2C-bus) ≤ 1.1 Vmax 3.6 V36
HIGH-level input voltage VIHSCL, SDA, RESET, ADDR; VDD(I2C-bus) > 1.1 Vmax 3.6 V36
HIGH-level input voltage VIHP2_7 to P0_0max 5.5 V36
LOW-level input voltage VILSCL, SDA, RESET, ADDR; VDD(I2C-bus) ≤ 1.1 Vmin -0.5 V36
LOW-level input voltage VILSCL, SDA, RESET, ADDR; VDD(I2C-bus) > 1.1 Vmin -0.5 V36
LOW-level input voltage VILP2_7 to P0_0min -0.5 V36
HIGH-level output current IOHP2_7 to P0_0max 10 mA36
LOW-level output current IOLP2_7 to P0_0max 25 mA36
Ambient temperature TambOperating in free airmin -40 · max 85 °C36
Thermal resistance from junction to ambient on a JEDEC 2S2P board Rth(j-a)HUQFN32 packagetyp 42 °C/W36
Input clamping voltage VIKII = -18 mAmin -1.2 V36
Power-on reset voltage VPORVI = VDD(P) or VSS; IO = 0 mAtyp 1.2 · max 1.5 V36
HIGH-level output voltage VOHP port; IOH = -8 mA; CCX.X = 11b; VDD(P) = 1.65 Vmin 1.2 V36
HIGH-level output voltage VOHP port; IOH = -8 mA; CCX.X = 11b; VDD(P) = 2.3 Vmin 1.8 V36
HIGH-level output voltage VOHP port; IOH = -8 mA; CCX.X = 11b; VDD(P) = 3 Vmin 2.6 V36
HIGH-level output voltage VOHP port; IOH = -8 mA; CCX.X = 11b; VDD(P) = 4.5 Vmin 4.1 V36
HIGH-level output voltage VOHP port; IOH = -2.5 mA and CCX.X = 00b; IOH = -5 mA and CCX.X = 01b; IOH = -7.5 mA and CCX.X = 10b; IOH = -10 mA and CCX.X = 11b; VDD(P) = 1.65 Vmin 1.1 V37
HIGH-level output voltage VOHP port; IOH = -2.5 mA and CCX.X = 00b; IOH = -5 mA and CCX.X = 01b; IOH = -7.5 mA and CCX.X = 10b; IOH = -10 mA and CCX.X = 11b; VDD(P) = 2.3 Vmin 1.7 V37
HIGH-level output voltage VOHP port; IOH = -2.5 mA and CCX.X = 00b; IOH = -5 mA and CCX.X = 01b; IOH = -7.5 mA and CCX.X = 10b; IOH = -10 mA and CCX.X = 11b; VDD(P) = 3 Vmin 2.5 V37
HIGH-level output voltage VOHP port; IOH = -2.5 mA and CCX.X = 00b; IOH = -5 mA and CCX.X = 01b; IOH = -7.5 mA and CCX.X = 10b; IOH = -10 mA and CCX.X = 11b; VDD(P) = 4.5 Vmin 4 V37
LOW-level output voltage VOLP port; IOL = 8 mA; CCX.X = 11b; VDD(P) = 1.65 Vmax 0.45 V37
LOW-level output voltage VOLP port; IOL = 8 mA; CCX.X = 11b; VDD(P) = 2.3 Vmax 0.25 V37
LOW-level output voltage VOLP port; IOL = 8 mA; CCX.X = 11b; VDD(P) = 3 Vmax 0.25 V37
LOW-level output voltage VOLP port; IOL = 8 mA; CCX.X = 11b; VDD(P) = 4.5 Vmax 0.2 V37
LOW-level output voltage VOLP port; IOL = 2.5 mA and CCX.X = 00b; IOL = 5 mA and CCX.X = 01b; IOL = 7.5 mA and CCX.X = 10b; IOL = 10 mA and CCX.X = 11b; VDD(P) = 1.65 Vmax 0.5 V37
LOW-level output voltage VOLP port; IOL = 2.5 mA and CCX.X = 00b; IOL = 5 mA and CCX.X = 01b; IOL = 7.5 mA and CCX.X = 10b; IOL = 10 mA and CCX.X = 11b; VDD(P) = 2.3 Vmax 0.3 V37
LOW-level output voltage VOLP port; IOL = 2.5 mA and CCX.X = 00b; IOL = 5 mA and CCX.X = 01b; IOL = 7.5 mA and CCX.X = 10b; IOL = 10 mA and CCX.X = 11b; VDD(P) = 3 Vmax 0.25 V37
LOW-level output voltage VOLP port; IOL = 2.5 mA and CCX.X = 00b; IOL = 5 mA and CCX.X = 01b; IOL = 7.5 mA and CCX.X = 10b; IOL = 10 mA and CCX.X = 11b; VDD(P) = 4.5 Vmax 0.2 V37
LOW-level output current IOLSDA; VOL = 0.4 V; VDD(I2C-bus) ≤ 2 Vmin 15 mA37
LOW-level output current IOLSDA; VOL = 0.4 V; VDD(I2C-bus) > 2 Vmin 20 mA37
LOW-level output current IOLINT; VOL = 0.4 V; VDD(P) = 1.65 V to 5.5 Vmin 3 mA37
HIGH-level input current IIHP port; VI = VDD(P); VDD(P) = 1.65 V to 5.5 Vmax 1 uA37
LOW-level input current IILP port; VI = VSS; VDD(P) = 1.65 V to 5.5 Vmax 1 uA37
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 3.6 V to 5.5 V; fSCL = 0 kHztyp 3 · max 7 uA37
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 2.3 V to 3.6 V; fSCL = 0 kHztyp 2 · max 5 uA37
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 1.65 V to 2.3 V; fSCL = 0 kHztyp 1.5 · max 3 uA37
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 3.6 V to 5.5 V; fSCL = 400 kHztyp 27 · max 45 uA37
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 2.3 V to 3.6 V; fSCL = 400 kHztyp 12 · max 25 uA37
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 1.65 V to 2.3 V; fSCL = 400 kHztyp 7.5 · max 15 uA38
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 3.6 V to 5.5 V; fSCL = 1 MHztyp 70 · max 110 uA38
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 2.3 V to 3.6 V; fSCL = 1 MHztyp 30 · max 60 uA38
Supply current IDDClocked mode; IDD(I2C-bus) + IDD(P); VI on ADDR, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VDD(P); IO = 0 mA; I/O = inputs; VDD(P) = 1.65 V to 2.3 V; fSCL = 1 MHztyp 20 · max 40 uA38
Supply current IDDActive mode; IDD(I2C-bus) + IDD(P); VI on ADDR, RESET = VDD(I2C-bus); VI on P port = VDD(P); IO = 0 mA; I/O = inputs; continuous register read; VDD(P) = 3.6 V to 5.5 V; fSCL = 400 kHztyp 150 · max 250 uA38
Supply current IDDActive mode; IDD(I2C-bus) + IDD(P); VI on ADDR, RESET = VDD(I2C-bus); VI on P port = VDD(P); IO = 0 mA; I/O = inputs; continuous register read; VDD(P) = 2.3 V to 3.6 V; fSCL = 400 kHztyp 120 · max 200 uA38
Supply current IDDActive mode; IDD(I2C-bus) + IDD(P); VI on ADDR, RESET = VDD(I2C-bus); VI on P port = VDD(P); IO = 0 mA; I/O = inputs; continuous register read; VDD(P) = 1.65 V to 2.3 V; fSCL = 400 kHztyp 75 · max 150 uA38
Supply current IDDActive mode; IDD(I2C-bus) + IDD(P); VI on ADDR, RESET = VDD(I2C-bus); VI on P port = VDD(P); IO = 0 mA; I/O = inputs; continuous register read; VDD(P) = 3.6 V to 5.5 V; fSCL = 1 MHztyp 450 · max 625 uA38
Supply current IDDActive mode; IDD(I2C-bus) + IDD(P); VI on ADDR, RESET = VDD(I2C-bus); VI on P port = VDD(P); IO = 0 mA; I/O = inputs; continuous register read; VDD(P) = 2.3 V to 3.6 V; fSCL = 1 MHztyp 270 · max 500 uA38
Supply current IDDActive mode; IDD(I2C-bus) + IDD(P); VI on ADDR, RESET = VDD(I2C-bus); VI on P port = VDD(P); IO = 0 mA; I/O = inputs; continuous register read; VDD(P) = 1.65 V to 2.3 V; fSCL = 1 MHztyp 160 · max 210 uA38
Supply current IDDWith pull-ups enabled; IDD(I2C-bus) + IDD(P); VI on ADDR, SCL, SDA and RESET = VDD(I2C-bus) or VSS; VI on P port = VSS; IO = 0 mA; I/O = inputs with pull-up enabled; fSCL = 0 kHz; VDD(P) = 1.65 V to 5.5 Vtyp 1.7 · max 2.5 mA38
Additional quiescent supply current ΔIDDADDR, SCL, SDA, RESET; one input at VDD(I2C-bus) - 0.6 V, other inputs at VDD(I2C-bus) or VSS; VDD(P) = 1.65 V to 5.5 V; internal pull-up/pull-down resistors disabledmax 25 uA38
Additional quiescent supply current ΔIDDP port; one input at VDD(P) - 0.6 V, other inputs at VDD(P) or VSS; VDD(P) = 1.65 V to 5.5 V; internal pull-up/pull-down resistors disabledmax 80 uA38
Input capacitance CiVI = VDD(I2C-bus) or VSS; VDD(P) = 1.65 V to 5.5 Vtyp 6 pF38
Input/output capacitance CioVI/O = VDD(I2C-bus) or VSS; VDD(P) = 1.65 V to 5.5 Vtyp 7 pF38
Input/output capacitance CioVI/O = VDD(P) or VSS; VDD(P) = 1.65 V to 5.5 Vtyp 7.5 pF38
Internal pull-up resistance Rpu(int)Input/outputmin 50 · typ 100 · max 150 kΩ38
Internal pull-down resistance Rpd(int)Input/outputmin 50 · typ 100 · max 150 kΩ38
SCL clock frequency fSCLStandard-mode I C-busmin 0 · max 100 kHz45
SCL clock frequency fSCLFast-mode I C-busmin 0 · max 400 kHz45
SCL clock frequency fSCLFast-mode Plus I C-busmin 0 · max 1000 kHz45
HIGH period of the SCL clock tHIGHStandard-mode I C-busmin 4 us45
HIGH period of the SCL clock tHIGHFast-mode I C-busmin 0.6 us45
HIGH period of the SCL clock tHIGHFast-mode Plus I C-busmin 0.26 us45
LOW period of the SCL clock tLOWStandard-mode I C-busmin 4.7 us45
LOW period of the SCL clock tLOWFast-mode I C-busmin 1.3 us45
LOW period of the SCL clock tLOWFast-mode Plus I C-busmin 0.5 us45
Pulse width of spikes that must be suppressed by the input filter tSPStandard-mode I C-busmin 0 · max 50 ns45
Pulse width of spikes that must be suppressed by the input filter tSPFast-mode I C-busmin 0 · max 50 ns45
Pulse width of spikes that must be suppressed by the input filter tSPFast-mode Plus I C-busmin 0 · max 50 ns45
Data set-up time tSU;DATStandard-mode I C-busmin 250 ns45
Data set-up time tSU;DATFast-mode I C-busmin 100 ns45
Data set-up time tSU;DATFast-mode Plus I C-busmin 50 ns45
Data hold time tHD;DATStandard-mode I C-busmin 0 ns45
Data hold time tHD;DATFast-mode I C-busmin 0 ns45
Data hold time tHD;DATFast-mode Plus I C-busmin 0 ns45
Rise time of both SDA and SCL signals trStandard-mode I C-busmax 1000 ns45
Rise time of both SDA and SCL signals trFast-mode I C-busmin 20 · max 300 ns45
Rise time of both SDA and SCL signals trFast-mode Plus I C-busmax 120 ns45
Fall time of both SDA and SCL signals tfStandard-mode I C-busmax 300 ns46
Fall time of both SDA and SCL signals tfFast-mode I C-busmax 300 ns46
Fall time of both SDA and SCL signals tfFast-mode Plus I C-busmax 120 ns46
Bus free time between a STOP and START condition tBUFStandard-mode I C-busmin 4.7 us46
Bus free time between a STOP and START condition tBUFFast-mode I C-busmin 1.3 us46
Bus free time between a STOP and START condition tBUFFast-mode Plus I C-busmin 0.5 us46
Set-up time for a repeated START condition tSU;STAStandard-mode I C-busmin 4.7 us46
Set-up time for a repeated START condition tSU;STAFast-mode I C-busmin 0.6 us46
Set-up time for a repeated START condition tSU;STAFast-mode Plus I C-busmin 0.26 us46
Hold time (repeated) START condition tHD;STAStandard-mode I C-busmin 4 us46
Hold time (repeated) START condition tHD;STAFast-mode I C-busmin 0.6 us46
Hold time (repeated) START condition tHD;STAFast-mode Plus I C-busmin 0.26 us46
Set-up time for STOP condition tSU;STOStandard-mode I C-busmin 4 us46
Set-up time for STOP condition tSU;STOFast-mode I C-busmin 0.6 us46
Set-up time for STOP condition tSU;STOFast-mode Plus I C-busmin 0.26 us46
Data valid time tVD;DATStandard-mode I C-bus; SCL LOW to SDA output validmax 3.45 us46
Data valid time tVD;DATFast-mode I C-bus; SCL LOW to SDA output validmax 0.9 us46
Data valid time tVD;DATFast-mode Plus I C-bus; SCL LOW to SDA output validmax 0.45 us46
Data valid acknowledge time tVD;ACKStandard-mode I C-bus; ACK signal from SCL LOW to SDA (out) LOWmax 3.45 us46
Data valid acknowledge time tVD;ACKFast-mode I C-bus; ACK signal from SCL LOW to SDA (out) LOWmax 0.9 us46
Data valid acknowledge time tVD;ACKFast-mode Plus I C-bus; ACK signal from SCL LOW to SDA (out) LOWmax 0.45 us46
Reset pulse width tw(rst)Standard-mode I C-busmin 150 ns46
Reset pulse width tw(rst)Fast-mode I C-busmin 150 ns46
Reset pulse width tw(rst)Fast-mode Plus I C-busmin 150 ns46
Reset recovery time trec(rst)Standard-mode I C-busmin 500 ns46
Reset recovery time trec(rst)Fast-mode I C-busmin 500 ns46
Reset recovery time trec(rst)Fast-mode Plus I C-busmin 500 ns46
Reset time trstStandard-mode I C-bus; minimum time for SDA to become HIGH or minimum time to wait before doing a STARTmin 600 ns46
Reset time trstFast-mode I C-bus; minimum time for SDA to become HIGH or minimum time to wait before doing a STARTmin 600 ns46
Reset time trstFast-mode Plus I C-bus; minimum time for SDA to become HIGH or minimum time to wait before doing a STARTmin 600 ns46
Valid time on pin INT tv(INT)Standard-mode I C-bus; From P port to INT; CL ≤ 100 pFmax 1 us46
Valid time on pin INT tv(INT)Fast-mode I C-bus; From P port to INT; CL ≤ 100 pFmax 1 us46
Valid time on pin INT tv(INT)Fast-mode Plus I C-bus; From P port to INT; CL ≤ 100 pFmax 1 us46
Reset time on pin INT trst(INT)Standard-mode I C-bus; From SCL to INT; CL ≤ 100 pFmax 1 us46
Reset time on pin INT trst(INT)Fast-mode I C-bus; From SCL to INT; CL ≤ 100 pFmax 1 us46
Reset time on pin INT trst(INT)Fast-mode Plus I C-bus; From SCL to INT; CL ≤ 100 pFmax 1 us46
Input voltage on all ports VI(P)Negative-voltage rating may be exceeded if current ratings are observedmin -0.5 · max 6.5 V35
Output voltage on all ports VO(P)Voltage rating may be exceeded if current ratings are observedmin -0.5 · max 6.5 V35
Input clamping current IIKADDR, RESET, SCL; VI < 0 Vmax 20 mA35
Output clamping current IOKINT; VO < 0 Vmax 20 mA35
Input/output clamping current IIOKP port; VO < 0 V or VO > VDD(P)max 20 mA35
Input/output clamping current IIOKSDA; VO < 0 V or VO > VDD(I2C-bus)max 20 mA35
Input current IIADDR, SCL, SDA, RESET; VDD(P) = 1.65 V to 5.5 V; VI = VDD(I2C-bus) or VSSmax 1 uA37

Pins, by the datasheet

32
1 P0_0
Port 0 input/output 0; configured as input at power-on. · p. 6
2 P0_1
Port 0 input/output 1; configured as input at power-on. · p. 6
3 P0_2
Port 0 input/output 2; configured as input at power-on. · p. 6
4 P0_3
Port 0 input/output 3; configured as input at power-on. · p. 6
5 P0_4
Port 0 input/output 4; configured as input at power-on. · p. 6
6 P0_5
Port 0 input/output 5; configured as input at power-on. · p. 6
7 P0_6
Port 0 input/output 6; configured as input at power-on. · p. 6
8 P0_7
Port 0 input/output 7; configured as input at power-on. · p. 6
9 P1_0
Port 1 input/output 0; configured as input at power-on. · p. 6
10 P1_1
Port 1 input/output 1; configured as input at power-on. · p. 6
11 P1_2
Port 1 input/output 2; configured as input at power-on. · p. 6
12 P1_3
Port 1 input/output 3; configured as input at power-on. · p. 6
13 P1_4
Port 1 input/output 4; configured as input at power-on. · p. 6
14 P1_5
Port 1 input/output 5; configured as input at power-on. · p. 6
15 P1_6
Port 1 input/output 6; configured as input at power-on. · p. 6
16 P1_7
Port 1 input/output 7; configured as input at power-on. · p. 6
17 P2_0
Port 2 input/output 0; configured as input at power-on. · p. 6
18 P2_1
Port 2 input/output 1; configured as input at power-on. · p. 6
19 P2_2
Port 2 input/output 2; configured as input at power-on. · p. 6
20 P2_3
Port 2 input/output 3; configured as input at power-on. · p. 6
21 P2_4
Port 2 input/output 4; configured as input at power-on. · p. 6
22 P2_5
Port 2 input/output 5; configured as input at power-on. · p. 6
23 P2_6
Port 2 input/output 6; configured as input at power-on. · p. 6
24 P2_7
Port 2 input/output 7; configured as input at power-on. · p. 6
25 VSS
Supply ground. · p. 6
26 ADDR
Address input; connect directly to VDD(I2C-bus), ground, SCL or SDA. · p. 6
27 VDD(P)
Port P supply; requires a 0.1 uF bypass capacitor as close to the package as practical. · p. 6
28 RESET
Active LOW reset input; pull up to VDD(I2C-bus) if no active connection is used. · p. 6
29 SCL
Serial clock line; connect to VDD(I2C-bus) through a pull-up resistor. · p. 5
30 SDA
Serial data line; connect to VDD(I2C-bus) through a pull-up resistor. · p. 5
31 VDD(I2C-bus)
I2C-bus supply; connect directly to external bus controller VDD; provides voltage-level translation. · p. 5
32 INT
Active LOW interrupt output; connect to VDD(I2C-bus) or VDD(P) through a pull-up resistor. · p. 6

Ordering codes, by the datasheet

1
PCAL6524HEAZ
HUQFN32 · 7-inch reel, Q2/T3; minimum order quantity 500; Tamb = -40 °C to +85 °C · p. 4

Open-source boards using it

3
  • 2 layers262 × 113.9 mmQuacken, the printed circuit board in 3D

    Quacken

    Nuclear-Squid/Quacken

    Libre, ergonomic, polymorphic: a single PCB for many possible layouts.

    108 parts38GPL-3.0
  • 6 layers147.3 × 95.9 mmZoutwachter measurement, the printed circuit board in 3D

    Zoutwachter measurement

    Multiflexmeter/PZLD-Zoutwachter

    Automated groundwater conductivity readout based CN0359

    335 parts
  • 6 layers143.4 × 126.2 mmEsl gsu, the printed circuit board in 3D

    Esl gsu

    tiancilliers/esl-gsu

    Satellite interfacing kit in development by the ESL (Electronic Systems Lab)

    741 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PCAL6524HEAZ?

Yes. The symbol is EasyEDA_Cloud:PCAL6524HEAZ and the footprint EasyEDA_Cloud:HQFN-32_L5.0-W5.0-P0.50-BL-EP3.0, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PCAL6524HEAZ?

HUQFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.

Where is the PCAL6524HEAZ datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the PCAL6524HEAZ?

JLCPCB lists it as part C3000497, with 56 in stock; the sellers' links on this page open their listings.

What can replace the PCAL6524HEAZ?

Parts like it in the library: the TCA8418RTW by Texas Instruments, the TCAL6416RTW by Texas Instruments, the CH422G by WCH (Nanjing Qinheng Microelectronics) and the TCA9536DGKR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PCAL6524HEAZ?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.