

Zoutwachter measurement
Automated groundwater conductivity readout based CN0359
- Size
- 147.3 × 95.9 mm
- Copper layers
- 6
- Thickness
- 1.57 mm
- Parts
- 335
- Nets
- 412
- Pads
- 1,457
- Tracks, vias
- 3,840, 630
- Pours
- 957
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Dec 2023
- Updated
- 19 Sep 2025
Overview
Zoutwachter measurement is an open-source printed circuit board by Multiflexmeter, from the Multiflexmeter/PZLD-Zoutwachter repository on GitHub. It is a 6-layer board of 147.3 × 95.9 mm with 335 parts on 412 nets, routed with 3,840 tracks and 630 vias.
It is built around the 74LVC1G125GW, PCAL6524HEAZ and ADP5070ACPZ, with the SP3485EN-Y, SPX3819M5-L-5-0 and USBLC6-2SC6 among its other parts. Its parts include 122 resistors, 112 capacitors, 37 ICs, 31 diodes and 8 connectors. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
1074LVC1G125GW
SOT-353-40℃~+125℃ 1 1 1.65V~5.5V 2.1ns@3.3V,50pF 32mA 32mA 4uA 74LVC Schmitt trigger Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversPCAL6524HEAZ
HUQFN-32-EP(5x5)-40℃~+85℃ 1MHz 24 25mA 2uA 4 800mV~3.6V、1.65V~5.5V I2C、SMBus Interrupt Output Push-Pull、Open-drain Reset function、Cascade and address expansion、Input anti-jitter、Built-in LED driver、IO level configurable HUQFN-32-EP(5x5) I/O Expanders ROHSNXP SemiconductorsI/O ExpandersADP5070ACPZ
LFCSP-20(4x4)-40℃~+125℃@(TJ) 1.2MHz、2.4MHz 2 2.85V~15V 600mA、1A Adjustable Boost、SEPIC Built-in No LFCSP-20(4x4) DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersSP3485EN-Y
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSYLPTECRS-485 / RS-422 ICsSPX3819M5-L-5-0
SOT-23-5-40℃~+85℃@(Ta) 1 20V 350mV@(100mA) 500mA 5V 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedDFLS240
PowerDI-123-65℃~+125℃ 1 Independent 20uA@40V 2A 40A 40V 700mV@2A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSM712
SOT-23-55℃~+125℃ 12A 16V、26V 1uA、2uA 2 300W 7.5V、13.5V 75pF 7V、12V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
Parts
335| Qty | Value | Footprint | References |
|---|---|---|---|
| 97 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C14, C15, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +81 |
| 96 | 330 | Resistor_SMD:R_0603_1608Metric | R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115 +80 |
| 28 | WS2812B | WS2812B-2020:WS2812B-2020 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +12 |
| 24 | ADG6412BCPZ | ADG6412BCPZ:ADG6412BCPZ | U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24, U25 +8 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R117, R118, R121 |
| 6 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R2, R19, R20, R122, R123 |
| 6 | ~ | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | Hole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | PCAL6524HEAZ | PCAL6524HEAZ:PCAL6524HEAZ | U5, U6, U7, U8 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric | C8, C9 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C4, C7 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 47n | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C71, C73 |
| 2 | 4u7H | Inductor_SMD:L_Wuerth_MAPI-4030 | L2, L3 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 74LVC1G125GW | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U35, U36 |
| 2 | DFLS240 | Diode_SMD:D_PowerDI-123 | D29, D30 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C80 |
| 1 | 118k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R124 |
| 1 | 1373889 | Phoenix Contact-1373889:1373889 | J7 |
| 1 | 137k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 1u | custom_library_FP:CP-3216-18 | C81 |
| 1 | 1uH 1.6A | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 25k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 2M32 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 2M43 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 511k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | ADP5070ACPZ | Package_CSP:LFCSP-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U33 |
| 1 | I2C control port | custom_library_FP:DEALON DW254S-22-04-85 SMD 2x2pin 2.54mm straight | J4 |
| 1 | LED_IN_ENABLE | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | LED_OUT_ENABLE | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | LOGO | Logos:Logo-Multiflexmeter (staand) | G*** |
| 1 | LOGO | Logos:Logo-Multiflexmeter (liggend) | G*** |
| 1 | Output connector | Phoenix Contact MSTBVA 2.5-4-G-5.08 - PCB header 1755752:1755752 | J1 |
| 1 | Power source Host | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | Power source Sensor-Data | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP6 |
| 1 | Power source Sensor-Power | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP7 |
| 1 | Power source USB/Host | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP5 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | RS-485 port | custom_library_FP:DEALON DW254S-22-04-85 SMD 2x2pin 2.54mm straight | J8 |
| 1 | SM712 | Package_TO_SOT_SMD:SOT-23 | D31 |
| 1 | SP3485EN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U37 |
| 1 | SPX3819M5-L-5-0 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | STM32L071CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD Pin Header | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | SWD-TagConnect | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical_with_bottom_clip | J3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TPS631000DRLR | ul_TPS631000DRLR:TPS631000DRLR_TEX | U2 |
| 1 | USB-C Connector | MOLEX 217182-0001 USB-C:MOLEX_2171820001 | J6 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U34 |
| 1 | Zoutwachter cable | Phoenix Contact MSTBVA 2.5-24-G-5.08 - PCB header 1755956:1755956 | J5 |
Similar boards
- 6 layers200 × 75 mm

- 2 layers262 × 113.9 mm

Quacken
Nuclear-Squid/Quacken
Libre, ergonomic, polymorphic: a single PCB for many possible layouts.
108 parts38GPL-3.0 - 4 layers125 × 70 mm

- 6 layers143.4 × 126.2 mm

Esl gsu
tiancilliers/esl-gsu
Satellite interfacing kit in development by the ESL (Electronic Systems Lab)
741 parts - 4 layers105 × 60 mm

Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 4 layers120 × 100 mm

Cryocooler
jhyland87/Cryocooler-Controller
Control system for STI Hybrid-98 Stirling cycle cryocooler.
338 parts2 - 4 layers70 × 97 mm

- 2 layers87.6 × 81.5 mm

Questions
How big is the Zoutwachter measurement PCB?
It measures 147.3 × 95.9 mm and has 6 copper layers, 1.57 mm thick.
What parts does the Zoutwachter measurement use?
335 parts, built around the 74LVC1G125GW, PCAL6524HEAZ, ADP5070ACPZ and SP3485EN-Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zoutwachter measurement KiCad files?
From the Multiflexmeter/PZLD-Zoutwachter repository on GitHub, at the commit this page was made from: the board is hardware/Zoutwachter-measurement.kicad_pcb and its schematic hardware/LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zoutwachter measurement design in my own project?
Its repository states no licence, so its author keeps all rights: ask Multiflexmeter before reusing the design.