
Jetson agx thor baseboard
antmicro/jetson-agx-thor-baseboard
Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module
NXP SemiconductorsExtended
-40℃~+125℃ 1 1.65V~3.6V 2.3V~5.5V 4 50Mbps Auto Direction Detection Bidirectional Push-Pull、Open-drain DHVQFN-14-EP(2.5x3) Translators, Level Shifters ROHS
The NTS0104BQ is a translators, Level Shifter made by NXP Semiconductors in a DHVQFN-14-EP(2.5x3) package with 15 pins. -40℃~+125℃ 1 1.65V~3.6V 2.3V~5.5V 4 50Mbps Auto Direction Detection Bidirectional Push-Pull、Open-drain DHVQFN-14-EP(2.5x3) Translators, Level Shifters ROHS.
PCBKit's library has its KiCad symbol (NTS0104_DHVQFN:NTS0104_DHVQFN, from Antmicro) and its footprint (dhvqfn-14-1ep-2-5x3mm:DHVQFN-14-1EP_2.5x3mm, from Antmicro), ready for a KiCad board. 106 are in stock at JLCPCB (part C2677609). 8 open-source boards in 8 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VCC_A | Power in |
| 2 | A1 | Passive |
| 3 | A2 | Passive |
| 4 | A3 | Passive |
| 5 | A4 | Passive |
| 6 | NC | Not connected |
| 7 | GND | Power in |
| 8 | OE | Passive |
| 9 | NC | Not connected |
| 10 | B4 | Passive |
| 11 | B3 | Passive |
| 12 | B2 | Passive |
| 13 | B1 | Passive |
| 14 | VCC_B | Power in |
| 15 | GNDPAD | Power in |

antmicro/jetson-agx-thor-baseboard
Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module

antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout

antmicro/dc-scm-osm-l-carrier-card
DC-SCM Card supporting OSM-L System on Modules

antmicro/cm4-baseboard-lvds-adapter
Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays

antmicro/gem-baseboard
This repository contains PCB design files for a demo board compatible with the GEM1 and GEM2 adapter boards.

richgumy/black_sensor
A sensor developed using solely a carbon black silicone elastomer composite and the driving electronics.


TUDelft-SPC-Lab/spcl_midge_hardware
Hardware design files for the SPC lab MIDGE wearable devices for in-the-wild social data collection.
Yes. The symbol is NTS0104_DHVQFN:NTS0104_DHVQFN and the footprint dhvqfn-14-1ep-2-5x3mm:DHVQFN-14-1EP_2.5x3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
DHVQFN-14-EP(2.5x3), with 15 pins. Its footprint is drawn on this page.
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2677609, with 106 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the NTB0104BQ by NXP Semiconductors, the TXU0204BQAR by Texas Instruments, the NTB0104BQ-Q100X by NXP Semiconductors and the P3S0210BQAZ by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.
8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.