Skip to the content
1234567891011121314

74HC126D

NexperiaExtended

-40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 4 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
nexperia/74HC126D
Category
Buffer, Driver, Transceiver
Package
SO-14
Pins
14
In stock
2,138 at JLCPCB (C5600)
Used on
9 open-source boards

Overview

The 74HC126D is a buffer, Driver, Transceiver made by Nexperia in a SO-14 package with 14 pins. -40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 4 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (Standard Logic:74126, from CERN's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 2,138 are in stock at JLCPCB (part C5600). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

11OE42OE103OE134OE21A52A93A124A14VCC31Y62Y83Y114Y7GND
Standard Logic:74126From CERN's library

Footprint

1234567891011121314
Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

Pinout

14
The pins of the 74HC126D
PinNameType
11OEInput
21AInput
31YTri-state
42OEInput
52AInput
62YTri-state
7GNDPower in
83YTri-state
93AInput
103OEInput
114YTri-state
124AInput
134OEInput
14VCCPower in

Open-source boards using it

9See all 9
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layersDps rs232, the printed circuit board in 3D

    Dps rs232

    radioelf/DPS5015--Nextion

    Control 2 DPS5015 con pantalla Nextion y arduino nano

    33 parts7
  • 2 layers72 × 67 mmI2s muliplexer, the printed circuit board in 3D

    I2s muliplexer

    adoble/modular-audio

    A digital modular audio system

    44 parts
  • 4 layers90.2 × 95.9 mmPiridium bus, the printed circuit board in 3D

    Piridium bus

    Alan-JH/piridium-bus

    Flight Computer Board for TJ Cubesat Bus design

    162 parts
  • 2 layers75 × 30 mmAvrdoper re, the printed circuit board in 3D

    Avrdoper re

    alexjx/avrdoper-re

    AVR-Doper RE is a USB in-system programmer (ISP) for AVR microcontrollers. It is a respin of the original AVR-Doper, updated with an ATmega328P controller, a USB-C connector, selectable 5 V or 3.3 V target power, and a…

    42 parts
  • 4 layers60 × 75 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    143 parts1.7kApache-2.0
  • 4 layers124 × 38 mmProto1, the printed circuit board in 3D

    Proto1

    expeyes/expeyes-programs

    programs for expeyes and expeyes-junior

    144 parts18
  • 2 layers150 × 140 mmHT16K33Panel, the printed circuit board in 3D

    HT16K33Panel

    wakimizufu/TBSEQ

    126 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74HC126D?

Yes. The symbol is Standard Logic:74126 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74HC126D?

SO-14, with 14 pins. Its footprint is drawn on this page.

Where is the 74HC126D datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74HC126D?

JLCPCB lists it as part C5600, with 2,138 in stock; the sellers' links on this page open their listings.

What can replace the 74HC126D?

Parts like it in the library: the 74HC125D by Toshiba, the 74HC126D by Toshiba, the 74AHC125D by Nexperia and the 74LVC126AD-Q100J by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74HC126D?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.