Skip to the content
12

1PS79SB30

NexperiaExtended

1 Independent 1A 200mA 40V 500nA@25V 600mV@200mA SOD-523 Schottky Diodes ROHS

Part id
nexperia/1PS79SB30
Category
Schottky Diodes
Package
SOD-523
Pins
2
In stock
14,858 at JLCPCB (C426690)
Used on
4 open-source boards

Overview

The 1PS79SB30 is a schottky Diode made by Nexperia in a SOD-523 package with 2 pins. 1 Independent 1A 200mA 40V 500nA@25V 600mV@200mA SOD-523 Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-523, from KiCad's library), ready for a KiCad board. 14,858 are in stock at JLCPCB (part C426690). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-523From KiCad's library

From the datasheet

11
Reverse voltage, most
40 V · VR, absolute maximum · p. 2
Forward current, most
200 mA · IF, continuous, absolute maximum · p. 2
Works from
-65 °C · Tamb, min · p. 2
Works up to
150 °C · Tamb, max · p. 2
Junction, hottest
150 °C · Tj, absolute maximum · p. 2
Junction to air (SC-79)
450 K/W · in free air, FR4 PCB, single-sided copper, standard footprint, max · p. 2
Forward voltage
190 mV · IF = 0.1 mA, Tamb = 25 °C, typical · p. 3
Forward voltage
250 mV · IF = 1 mA, Tamb = 25 °C, typical · p. 3
Forward voltage
320 mV · IF = 10 mA, Tamb = 25 °C, typical · p. 3
Forward voltage
440 mV · IF = 100 mA, Tamb = 25 °C, typical · p. 3
Forward voltage
520 mV · IF = 200 mA, Tamb = 25 °C, typical · p. 3

Open-source boards using it

4
  • 6 layers40 × 40 mmDshotcan, the printed circuit board in 3D

    Dshotcan

    Poppy-Robotics/pwmcan

    124 parts
  • 6 layers82 × 75 mmVrb, the printed circuit board in 3D

    Vrb

    Poppy-Robotics/vrb

    Redundant voltage regulation and power monitoring board for robotics

    227 parts
  • 4 layers98.7 × 44.7 mmNanoLogger, the printed circuit board in 3D

    NanoLogger

    TobiasNetzer/nanoLogger

    Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.

    221 parts
  • 2 layers38 × 42 mmManipulator attachment, the printed circuit board in 3D

    Manipulator attachment

    borzeman/PzbElectronics

    Репозиторий для поддержки версионирования при разработке плат для киоска.

    96 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 1PS79SB30?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-523, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 1PS79SB30?

SOD-523, with 2 pins. Its footprint is drawn on this page.

Where is the 1PS79SB30 datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 1PS79SB30?

JLCPCB lists it as part C426690, with 14,858 in stock; the sellers' links on this page open their listings.

What can replace the 1PS79SB30?

Parts like it in the library: the BAS516-QX by Nexperia, the B5819WT by hongjiacheng, the SD103AWT by hongjiacheng and the B5819WT by GOODWORK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 1PS79SB30?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.