Skip to the content
12345

TLV333IDBVR-MS

MSKSEMIExtended

-2.75V~-900mV、900mV~2.75V -25℃~+125℃ 0.1V/us 1 1.8V~5.5V 10nV/℃ 13.5uA 135dB 1pA 1pA 1uV 550kHz 79.4nV/√Hz@1kHz Rail-to-Rail Input, Rail-to-Rail Output Zero drift / auto-zero、Reverse-phase input protection SOT-23-5 Precision Op Amps ROHS

Part id
msksemi/TLV333IDBVR-MS
Category
Operational Amplifier
Package
SOT-23-5
Pins
5
In stock
1,875 at JLCPCB (C22462559)
Used on
8 open-source boards

Overview

The TLV333IDBVR-MS is an operational Amplifier made by MSKSEMI in a SOT-23-5 package with 5 pins. -2.75V~-900mV、900mV~2.75V -25℃~+125℃ 0.1V/us 1 1.8V~5.5V 10nV/℃ 13.5uA 135dB 1pA 1pA 1uV 550kHz 79.4nV/√Hz@1kHz Rail-to-Rail Input, Rail-to-Rail Output Zero drift / auto-zero、Reverse-phase input protection SOT-23-5 Precision Op Amps ROHS.

PCBKit's library has its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 1,875 are in stock at JLCPCB (part C22462559). 8 open-source boards in 4 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Open-source boards using it

8
  • 4 layers223 × 95 mmAnalog i, the printed circuit board in 3D

    Analog i

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    568 parts44
  • 2 layers30 × 126.9 mmMad PlantBug, the printed circuit board in 3D

    Mad PlantBug

    Incomprehensible/Mad_PlantBug

    DIY and open source soil moisture sensor 🪴

    41 parts1MIT
  • 4 layers100 × 13.5 mmUsbc soldering iron, the printed circuit board in 3D

    Usbc soldering iron

    ma-ale/usbc_soldering_iron

    synched from https://git.alemauri.eu/alema/usbc_soldering_iron

    82 parts
  • 4 layersAnalog frontend panel, the printed circuit board in 3D

    Analog frontend panel

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    257 parts44
  • 4 layersAnalog frontend panel, the printed circuit board in 3D

    Analog frontend panel

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    308 parts44
  • 4 layersAnalog frontend panel, the printed circuit board in 3D

    Analog frontend panel

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    351 parts44
  • 4 layers293.6 × 72 mmAnalog i, the printed circuit board in 3D

    Analog i

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    500 parts44
  • 2 layers70 × 65 mmIgnitor driver, the printed circuit board in 3D

    Ignitor driver

    Queens-Rocket-Engineering-Team/gse-control-node

    The GSE control node is the control PCB for GSE systems to integrate with launch control. This includes actuator control, fan control, and a load cell reading.

    54 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV333IDBVR-MS?

Yes. the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV333IDBVR-MS?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV333IDBVR-MS datasheet?

MSKSEMI publishes it: the Datasheet link on this page opens it.

Where can I order the TLV333IDBVR-MS?

JLCPCB lists it as part C22462559, with 1,875 in stock; the sellers' links on this page open their listings.

What can replace the TLV333IDBVR-MS?

Parts like it in the library: the LMV321IDBVR by UMW, the LM321MF by UMW, the TLV9061IDBV by Texas Instruments and the LM321-TR by Gainsil. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV333IDBVR-MS?

8 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.