Skip to the content
1234

TC1108-3.3VDBTR

Microchip TechnologyExtended

-40℃~+125℃ 1 3.3V 300mA 480mV@(300mA) 60dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/TC1108-3.3VDBTR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-3
Pins
4
In stock
0 at JLCPCB (C622711)
Used on
11 open-source boards

Overview

The TC1108-3.3VDBTR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOT-223-3 package with 4 pins. -40℃~+125℃ 1 3.3V 300mA 480mV@(300mA) 60dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C622711). 11 open-source boards in 8 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GNDFrom PCBKit's generic symbols

Footprint

1234
EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRFrom EasyEDA

From the datasheet

16
Supply, least
2.7 V · VIN, recommended operating min; also requires VIN ≥ VR + VDROPOUT · p. 2
Supply, most
6 V · VIN, recommended operating max · p. 2
Supply, absolute maximum
6.5 V · VIN, absolute maximum · p. 2
Junction, hottest
125 °C · Junction operating temperature max · p. 2
Takes working
50 µA · VIN supply current typical · p. 2
Gives
300 mA · Rated continuous output current, minimum guaranteed capability · p. 2
Current limit
550 mA · Output short circuit current typical, VOUT = 0 V · p. 2
Output
3.3 V · VOUT fixed nominal setting · p. 6
Dropout
20 mV · Typical dropout at IL = 0.1 mA · p. 2
Dropout
80 mV · Typical dropout at IL = 100 mA · p. 2
Dropout
240 mV · Typical dropout at IL = 300 mA · p. 2
Junction to air (3-Pin SOT-223)
45 K/W · Junction to ambient; topside/backside/board areas 2500/2500/2500 sq mm · p. 4
Junction to air (3-Pin SOT-223)
53 K/W · Junction to ambient; topside/backside/board areas 225/2500/2500 sq mm · p. 4
Junction to air (3-Pin SOT-223)
59 K/W · Junction to ambient; topside/backside/board areas 100/2500/2500 sq mm · p. 4
Junction to air (3-Pin SOT-223)
52 K/W · Junction to ambient; topside/backside/board areas 1000/1000/1000 sq mm · p. 4
Junction to air (3-Pin SOT-223)
55 K/W · Junction to ambient; topside/backside/board areas 1000/0/1000 sq mm · p. 4

What it is and has

3
Output current
300mA · p. 1
Protection
Over current and over temperature · p. 1
Package
3-Pin SOT-223 · p. 1

Around it

2
cap 1F (min)
between VOUT and GND; Required; ESR greater than 0.1 Ω and less than 5.0 Ω. Aluminum electrolytic or tantalum; solid tantalum recommended below -25°C. · p. 3
cap 1F
between VIN and GND; Connect when using a battery or when more than 10 inches of wire separates the regulator from the AC filter capacitor. Aluminum electrolytic or tantalum. · p. 3

Specifications

23
ParameterConditionsAs printedPage
Input Voltagemax 6.5 V2
Maximum Voltage on Any PinVIN +0.3V to -0.3Vmin -0.3 V2
Operating Temperature Range TJ-40°C < TJ < 125°Cmin -40 · max 125 °C2
Storage Temperaturemin -65 · max 150 °C2
Input Operating Voltage VINNote 7: VIN ≥ VR + VDROPOUT and VIN ≥ 2.7V for IL = 0.1mA to IOUTMAXmin 2.7 · max 6 V2
Maximum Output Current IOUTMAXmin 300 mA2
VOUT Temperature Coefficient VOUT/TNote 2typ 40 ppm/°C2
Line Regulation VOUT/VIN(VR + 1V) ≤ VIN ≤ 6Vtyp 0.05 · max 0.35 %2
Load Regulation VOUT/VOUTIL = 0.1mA to IOUTMAX (Note 3)typ 0.5 · max 2 %2
Dropout Voltage VIN-VOUTIL = 0.1mAtyp 20 · max 30 mV2
Dropout Voltage VIN-VOUTIL = 100mAtyp 80 · max 160 mV2
Dropout Voltage VIN-VOUTIL = 300mA (Note 4)typ 240 · max 480 mV2
Supply Current IDDtyp 50 · max 90 A2
Power Supply Rejection Ratio PSRRFRE ≤ 1kHztyp 60 dB2
Output Short Circuit Current IOUTSCVOUT = 0Vtyp 550 · max 650 mA2
Thermal Regulation VOUT/PDNote 5typ 0.04 V/W2
Output Noise eNF = 10kHz, COUT = 1F, RLOAD = 50typ 260 nV/Hz2
Thermal Resistance JA3-Pin SOT-223; topside copper 2500 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 45 °C/W4
Thermal Resistance JA3-Pin SOT-223; topside copper 1000 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 45 °C/W4
Thermal Resistance JA3-Pin SOT-223; topside copper 225 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 53 °C/W4
Thermal Resistance JA3-Pin SOT-223; topside copper 100 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 59 °C/W4
Thermal Resistance JA3-Pin SOT-223; topside copper 1000 sq mm, backside copper 1000 sq mm, board 1000 sq mm; tab attached to topside coppertyp 52 °C/W4
Thermal Resistance JA3-Pin SOT-223; topside copper 1000 sq mm, backside copper 0 sq mm, board 1000 sq mm; tab attached to topside coppertyp 55 °C/W4

Pins, by the datasheet

3
1 VIN
Unregulated supply input. · p. 3
2 GND
Ground terminal. · p. 3
3 VOUT
Regulated voltage output. · p. 3

Ordering codes, by the datasheet

1
TC1108-3.3VDB
3-Pin SOT-223 · 3.3 V fixed output; package marking 110833 · p. 6

Open-source boards using it

11See all 11
  • 2 layers40 × 30 mmThermoDeviceLogger, the printed circuit board in 3D

    ThermoDeviceLogger

    makingdevices/TC-Logger-Device

    A thermocouple logger with USB communication

    33 parts10
  • 2 layers55 × 84.4 mmOpenReflowPlate, the printed circuit board in 3D

    OpenReflowPlate

    makingdevices/OpenReflowPlate

    An Open Reflow Plate machine for smd soldering

    71 parts6
  • 4 layers56 × 36 mmQSIT PayloadADCboard, the printed circuit board in 3D

    QSIT PayloadADCboard

    fhnw-ise-qcrypt/qsit_psd_payload_module_kicad

    kicad drawings to interface a position sensitive detector (diode) for the QSIT payload

    63 parts1
  • 2 layers62.5 × 32 mmSMPS, the printed circuit board in 3D

    SMPS

    makingdevices/OpenACDC

    A small board with a SMPS converter from AC to DC 5V

    25 parts1
  • 4 layers108.5 × 92.8 mmBrushed v2, the printed circuit board in 3D

    Brushed v2

    ill-ev-concept/EVC-PCB

    All new PCBs for EV Concept

    68 partsMIT
  • 2 layers40 × 30 mmThermoDeviceLogger, the printed circuit board in 3D

    ThermoDeviceLogger

    rubenelportero/MakingDevices

    https://makingdevices.com/

    33 parts
  • 2 layers40 × 30 mmThermoDeviceLogger, the printed circuit board in 3D

    ThermoDeviceLogger

    makingdevices/TC-Logger-Device

    A thermocouple logger with USB communication

    32 parts10
  • 2 layers40 × 30 mmThermoDeviceLogger, the printed circuit board in 3D

    ThermoDeviceLogger

    makingdevices/TC-Logger-Device

    A thermocouple logger with USB communication

    31 parts10

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TC1108-3.3VDBTR?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND and the footprint EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC1108-3.3VDBTR?

SOT-223-3, with 4 pins. Its footprint is drawn on this page.

Where is the TC1108-3.3VDBTR datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC1108-3.3VDBTR?

JLCPCB lists it as part C622711, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TC1108-3.3VDBTR?

Parts like it in the library: the ME1117A33B3G by MICRONE, the SGM2212-3.3XKC3G/TR by SG Micro, the BL8072CLTR33 by BL and the GN1117-3.3V by GN Semic. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC1108-3.3VDBTR?

11 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.