Skip to the content
12345678

MCP6022-I/SN

Microchip TechnologyExtended

-40℃~+125℃ 10MHz 1mA 1pA 1pA 2 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
microchip/MCP6022-I/SN
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
7,079 at JLCPCB (C57639)
Used on
2 open-source boards

Overview

The MCP6022-I/SN is an operational Amplifier made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ 10MHz 1mA 1pA 1pA 2 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:MCP6022, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 7,079 are in stock at JLCPCB (part C57639). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

12-3+
Amplifier_Operational:MCP6022From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

9
Supply, least
2.5 V · VDD relative to VSS, recommended operating min · p. 3
Supply, most
5.5 V · VDD relative to VSS, recommended operating max · p. 3
Supply, absolute maximum
7 V · VDD – VSS, absolute max · p. 3
Works from
-40 °C · Industrial ambient temperature min · p. 5
Works up to
85 °C · Industrial ambient temperature max · p. 5
Junction, hottest
150 °C · Junction temperature absolute max · p. 3
Takes working
2 mA · sum of two amplifiers' typical quiescent currents, IO = 0 · p. 3
A pin gives at most
30 mA · Output and supply pins, absolute max magnitude · p. 3
Junction to air (8L-SOIC)
163 K/W · Junction to ambient, typical · p. 5

What it is and has

5
Input/output
Rail-to-rail · p. 1
Bandwidth
10 MHz typical · p. 1
Input noise voltage density
8.7 nV/Hz at 10 kHz typical · p. 1
Input offset voltage
±500 µV maximum, industrial temperature · p. 1
Unity gain stable
Yes · p. 1

Specifications

37
ParameterConditionsAs printedPage
VDD – VSSmax 7 V3
Current Analog Input Pins (VIN+, VIN-)min -2 · max 2 mA3
Current at Output and Supply Pinsmin -30 · max 30 mA3
Storage Temperaturemin -65 · max 150 °C3
Maximum Junction Temperaturemax 150 °C3
ESD Protection on All Pins (HBM; MM)HBMmin 2 kV3
ESD Protection on All Pins (HBM; MM)MMmin 200 V3
Input Offset Voltage: Industrial Temperature Parts VOSVCM = 0V; MCP6022-Imin -500 · max 500 uV3
Input Offset Voltage Temperature Drift VOS/TATA = -40°C to +125°Ctyp 3.5 uV/°C3
Power Supply Rejection Ratio PSRRVCM = 0Vmin 74 · typ 90 dB3
Input Bias Current: IBtyp 1 pA3
Input Bias Current: Industrial Temperature Parts IBTA = +85°C; MCP6022-Ityp 30 · max 150 pA3
Input Offset Current IOSTypical value is ±1 pAtyp 1 pA3
Common-Mode Rejection Ratio CMRRVDD = 5V, VCM = -0.3V to 5.3Vmin 74 · typ 90 dB3
Common-Mode Rejection Ratio CMRRVDD = 5V, VCM = 3.0V to 5.3Vmin 70 · typ 85 dB3
Common-Mode Rejection Ratio CMRRVDD = 5V, VCM = -0.3V to 3.0Vmin 74 · typ 90 dB3
DC Open-Loop Gain (Large Signal) AOLVCM = 0V, VOUT = VSS + 0.3V to VDD – 0.3Vmin 90 · typ 110 dB3
Output Short Circuit Current ISCVDD = 2.5V; typical value is ±30 mAtyp 30 mA3
Output Short Circuit Current ISCVDD = 5.5V; typical value is ±22 mAtyp 22 mA3
Supply Voltage VDDmin 2.5 · max 5.5 V3
Quiescent Current per Amplifier IQIO = 0min 0.5 · typ 1 · max 1.35 mA3
Gain Bandwidth Product GBWPtyp 10 MHz4
Phase Margin PMG = +1 V/Vtyp 65 °4
Settling Time, 0.2% tSETTLEG = +1 V/V, VOUT = 100 mVp-ptyp 250 ns4
Slew Rate SRtyp 7 V/us4
Total Harmonic Distortion Plus Noise THD + Nf = 1 kHz, G = +1 V/V; VOUT = 0.25V to 3.25V (1.75V ± 1.50VPK), VDD = 5.0V, BW = 22 kHztyp 0.00053 %4
Total Harmonic Distortion Plus Noise THD + Nf = 1 kHz, G = +1 V/V, RL = 600; VOUT = 0.25V to 3.25V (1.75V ± 1.50VPK), VDD = 5.0V, BW = 22 kHztyp 0.00064 %4
Total Harmonic Distortion Plus Noise THD + Nf = 1 kHz, G = +1 V/V; VOUT = 4VP-P, VDD = 5.0V, BW = 22 kHztyp 0.0014 %4
Total Harmonic Distortion Plus Noise THD + Nf = 1 kHz, G = +10 V/V; VOUT = 4VP-P, VDD = 5.0V, BW = 22 kHztyp 0.0009 %4
Total Harmonic Distortion Plus Noise THD + Nf = 1 kHz, G = +100 V/V; VOUT = 4VP-P, VDD = 5.0V, BW = 22 kHztyp 0.005 %4
Input Noise Voltage Enif = 0.1 Hz to 10 Hztyp 2.9 uVp-p4
Input Noise Voltage Density enif = 10 kHztyp 8.7 nV/Hz4
Input Noise Current Density inif = 1 kHztyp 3 fA/Hz4
Industrial Temperature Range TAMCP6022-Imin -40 · max 85 °C5
Operating Temperature Range TANote 1: Industrial devices operate over this range with reduced performance; junction temperature must not exceed +150°Cmin -40 · max 125 °C5
Storage Temperature Range TAmin -65 · max 150 °C5
Thermal Resistance, 8L-SOIC JA8L-SOICtyp 163 °C/W5

Pins, by the datasheet

8
1 VOUTA
Analog Output (Op Amp A) · p. 15
2 VINA-
Inverting Input (Op Amp A) · p. 15
3 VINA+
Non-Inverting Input (Op Amp A) · p. 15
4 VSS
Negative power supply; connect to ground for a single positive supply. · p. 15
5 VINB+
Non-Inverting Input (Op Amp B) · p. 15
6 VINB–
Inverting Input (Op Amp B) · p. 15
7 VOUTB
Analog Output (Op Amp B) · p. 15
8 VDD
Positive power supply, 2.5V to 5.5V above VSS; needs a bypass capacitor. · p. 15

Open-source boards using it

2
  • 4 layers130 × 125 mmFlatburn V5, the printed circuit board in 3D

    Flatburn V5

    MIT-Senseable-City-Lab/flatburn-lte

    Part of the City Scanner project at MIT Senseable City Lab, Flatburn is an open-source, solar-powered, modular sensing platform that can be easily deployed on road vehicles to collect various environmental data.

    587 parts1MIT
  • 4 layers96 × 90.2 mmTransceiver, the printed circuit board in 3D

    Transceiver

    ngrabbs/ember

    Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.

    161 parts1CC0-1.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6022-I/SN?

Yes. The symbol is Amplifier_Operational:MCP6022 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6022-I/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6022-I/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6022-I/SN?

JLCPCB lists it as part C57639, with 7,079 in stock; the sellers' links on this page open their listings.

What can replace the MCP6022-I/SN?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6022-I/SN?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.