Skip to the content
12345678

MCP6021-E/P

Microchip TechnologyExtended

-40℃~+125℃ 1 10MHz 1mA 1pA 1pA 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS

Part id
microchip/MCP6021-E/P
Category
Operational Amplifier
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C640396)
Used on
8 open-source boards

Overview

The MCP6021-E/P is an operational Amplifier made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+125℃ 1 10MHz 1mA 1pA 1pA 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP6021-I_P, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C640396). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

6VOUT3VIN+2VIN-4VSS7VDD
EasyEDA_Cloud:MCP6021-I_PFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP6021-E/P
PinNameType
1NCUnspecified
2VIN-Unspecified
3VIN+Unspecified
4VSSUnspecified
5VREFUnspecified
6VOUTOutput
7VDDUnspecified
8NCUnspecified

Open-source boards using it

8
  • 4 layers78.5 × 80 mmDmgplus, the printed circuit board in 3D

    Dmgplus

    Spritetm/dmgplus

    DMGPlus, upgraded internals for the original GameBoy

    108 parts19
  • 2 layers66 × 35.6 mmProbe, the printed circuit board in 3D

    Probe

    alangarf/continuity-tester

    An implementation of "The Ultimate Continuity Tester" by "Leo's Bag of Tricks"

    29 parts1
  • 2 layers62 × 69 mmFilter, the printed circuit board in 3D

    Filter

    gulotmg/fpga-mcu-dac-adc-conversion-pipeline

    500 kSPS acquisition pipeline: Spartan-7 DDS + DAC7311 + STM32 bare-metal ADC + LabVIEW spectral analysis (IEEE 1241-2023)

    44 parts1MIT
  • 4 layers42.6 × 56.6 mmEmg sensing board, the printed circuit board in 3D

    Emg sensing board

    ayushchakra/emg-sensing

    Electromygraphy is a medical tool used to evaluate the health of individual muscles and the nerve cells that dictate their movement.

    177 parts
  • 2 layers52.3 × 29.7 mmMCP3208, the printed circuit board in 3D

    MCP3208

    ergeha/UG_MKII

    34 parts
  • 2 layers15.5 × 15.1 mmMP1, the printed circuit board in 3D

    MP1

    TinyTinfoil/MP1-Eclectronics

    15 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6021-E/P?

Yes. The symbol is EasyEDA_Cloud:MCP6021-I_P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6021-E/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6021-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6021-E/P?

JLCPCB lists it as part C640396, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MCP6021-E/P?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the NE5532P by Texas Instruments and the LM358N(XBLW) by XBLW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6021-E/P?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.