2 layers61.2 × 36.8 mm
2 layers52.3 × 29.7 mm
MCP3208
ergeha/UG_MKII- Size
- 52.3 × 29.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 25
- Pads
- 89
- Tracks, vias
- 114, 31
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Apr 2021
- Updated
- 6 May 2021
Overview
MCP3208 is an open-source printed circuit board by ergeha, from the ergeha/UG_MKII repository on GitHub. It is a 2-layer board of 52.3 × 29.7 mm with 34 parts on 25 nets, routed with 114 tracks and 31 vias.
It is built around the MCP3208-BI/P, MCP6021-E/P and MCP1541-I/TO. Its parts include 12 capacitors, 7 resistors, 6 connectors and 3 ICs.
Main components
3
MCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
MCP6021-E/P
PDIP-8-40℃~+125℃ 1 10MHz 1mA 1pA 1pA 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
MCP1541-I/TO
TO-92-3-40℃~+85℃@(Ta) 120uA 145uVp-p 2mA 4.096V 4.3V~5.5V 50ppm/℃ 700uVp-p Fixed Series ±1% TO-92-3 Voltage Reference ROHSMicrochip TechnologyVoltage Reference
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 47µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C12 |
| 4 | 68kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 3 | 1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8 |
| 2 | 1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 0.1µF | Capacitor_SMD:CP_Elec_4x4.5_HandSolder | C1 |
| 1 | 0.1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 1000pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 21Ω @ 1MHz | Ferrite_THT:FIL_NFZ32BW210HN11L_HandSolder | FB1 |
| 1 | 22µF | Capacitor_SMD:CP_Elec_5x5.3_HandSolder | C3 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CH1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | CH2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | CH3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CH4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | MCP1541 | Package_TO_SOT_SMD:SOT-23_Handsoldering_MCP | U1 |
| 1 | MCP3208 | Package_SO:SOIC-16_MCP_HandSolder | U3 |
| 1 | MCP6021 | Package_SO:SOIC-8_MCP_HandSolder | U2 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
The 33 most common of 34 parts.
More from ergeha/UG_MKII
1Similar boards
- 2 layers50 × 50 mm
Iv grapher
mihtjel/iv-grapher
IV graphing electronics project. KiCAD design and Python (PyQT) based software.
75 parts1GPL-3.0 - 2 layers132.1 × 82.6 mm
Isensor olinuxino
alorenzo175/remote_irradiance_sensor_design
This repositories contains the circuit board design for sensors that are deployed remotely, communicate in real-time via a cellular data network, and are power by a solar panel.
35 parts - 2 layers24.8 × 86.4 mm
Raspberry pico board Back
Jan-IngenHousz-Institute/spectrometer-C12666MA
Repository for the fw and analysis developed during the internship of Kjell Tolsma.
16 parts - 4 layers78.5 × 80 mm
- 2 layers66 × 35.6 mm
Probe
alangarf/continuity-tester
An implementation of "The Ultimate Continuity Tester" by "Leo's Bag of Tricks"
29 parts1 - 2 layers62 × 69 mm
Filter
gulotmg/fpga-mcu-dac-adc-conversion-pipeline
500 kSPS acquisition pipeline: Spartan-7 DDS + DAC7311 + STM32 bare-metal ADC + LabVIEW spectral analysis (IEEE 1241-2023)
44 parts1MIT - 4 layers42.6 × 56.6 mm
Emg sensing board
ayushchakra/emg-sensing
Electromygraphy is a medical tool used to evaluate the health of individual muscles and the nerve cells that dictate their movement.
177 parts - 2 layers
Questions
How big is the MCP3208 PCB?
It measures 52.3 × 29.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MCP3208 use?
34 parts, built around the MCP3208-BI/P, MCP6021-E/P and MCP1541-I/TO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCP3208 KiCad files?
From the ergeha/UG_MKII repository on GitHub, at the commit this page was made from: the board is MCP3208/MCP3208.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCP3208 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ergeha before reusing the design.