Skip to the content
2 layers50 × 50 mmIv grapher, the printed circuit board in 3D

IV graphing electronics project. KiCAD design and Python (PyQT) based software.

Size
50 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
75
Nets
38
Pads
197
Tracks, vias
504, 37
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
26 Mar 2017
Updated
9 Apr 2017

Overview

Iv grapher is an open-source printed circuit board by mihtjel, from the mihtjel/iv-grapher repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 50 mm with 75 parts on 38 nets, routed with 504 tracks and 37 vias.

It is built around the LM358, MC34063 and MCP3302-CI/P, with the MCP4921-E/SN, MC78L18ACP and MCP1541-I/TO among its other parts. Its parts include 19 capacitors, 19 resistors, 9 diodes, 8 ICs and 3 connectors.

Main components

8

README

README.md

iv-grapher

IV graphing electronics project. KiCAD design and Python (PyQT) based software.

Parts

75
QtyValueFootprintReferences
9100nCapacitors_SMD:C_0805C3, C4, C5, C6, C7, C10, C12, C13, C19
62k7Resistors_SMD:R_0805R4, R9, R15, R16, R17, R19
4100kResistors_SMD:R_0805R1, R3, R5, R7
3100uCapacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5C15, C17, C18
21kResistors_SMD:R_0805R2, R14
21nCapacitors_SMD:C_0805C1, C2
2220uCapacitors_ThroughHole:C_Radial_D8_L11.5_P3.5C8, C9
25V1Diodes_SMD:SOD-123D2, D3
2IRLML6244TO_SOT_Packages_SMD:SOT-23Q1, Q2
1+5vResistors_SMD:R_0805D7
1+5vMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP8
1100Resistors_SMD:R_0805R8
1100pCapacitors_SMD:C_0805C11
1100uChoke_SMD:Choke_SMD_6.3x6.3_H3L1
110kResistors_SMD:R_0805R18
1180Resistors_SMD:R_0805R11
118kResistors_SMD:R_0805R13
11n4148Resistors_SMD:R_0805D1
11n5819Diodes_SMD:SOD-123D4
11uResistors_SMD:R_0805L2
11uCapacitors_SMD:C_0805C16
1300Resistors_SMD:R_0805R6
1390pCapacitors_SMD:C_0805C14
1500mResistors_SMD:R_0805R12
19k9Resistors_SMD:R_0805R10
1BypassResistors_SMD:R_0805JP1
1CONN_02X06Connect:IDC_Header_Straight_12pinsP2
1ControlMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP1
1DUTDG306:DG306-5.0_2-pinP1
1DUT+Measurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP2
1DUT-Measurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP4
1DiffMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP3
1High currentResistors_SMD:R_0805D6
1High voltageResistors_SMD:R_0805D5
1LM358Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU2
1MC34063Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU5
1MC78L18ACPTO_SOT_Packages_SMD:SOT89-3_HousingU4
1MCP1541TO_SOT_Packages_SMD:SOT-23U6
1MCP3302Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU3
1MCP4921-E/SNHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1
1No referenceResistors_SMD:R_0805JP2
1POWERPin_Headers:Pin_Header_Straight_1x02P3
1REF191Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU7
1TC7660SO-08Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmIC1
1VCCResistors_SMD:R_0805D8
1VCCMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP9
1VCC post filterMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP6
1VCC pre filterMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP5
1VEEResistors_SMD:R_0805D9
1VEEMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP10
1VREFMeasurement_Points:Measurement_Point_Round-SMD-Pad_SmallTP7

The 74 most common of 75 parts.

Similar boards

  • 2 layers132.1 × 82.6 mmIsensor olinuxino, the printed circuit board in 3D

    Isensor olinuxino

    alorenzo175/remote_irradiance_sensor_design

    This repositories contains the circuit board design for sensors that are deployed remotely, communicate in real-time via a cellular data network, and are power by a solar panel.

    35 parts
  • 2 layers52.3 × 29.7 mmMCP3208, the printed circuit board in 3D

    MCP3208

    ergeha/UG_MKII

    34 parts
  • 2 layers24.8 × 86.4 mmRaspberry pico board Back, the printed circuit board in 3D

    Raspberry pico board Back

    Jan-IngenHousz-Institute/spectrometer-C12666MA

    Repository for the fw and analysis developed during the internship of Kjell Tolsma.

    16 parts
  • 2 layers50.5 × 128.5 mmOpenThereminV45, the printed circuit board in 3D

    OpenThereminV45

    GaudiLabs/OpenThereminV4

    Open Source Theremin Instrument

    107 parts249GPL-3.0
  • 4 layers68.6 × 53.3 mmTapMatrix, the printed circuit board in 3D

    TapMatrix

    cbonsig/openclock

    Open Clock: an open source hardware touchscreen digital clock

    65 parts27
  • 2 layers100 × 67.1 mmSpeedyMAP, the printed circuit board in 3D

    SpeedyMAP

    speeduino/Hardware-Extra

    The connector used is a Delphi Sicma 39 pin

    56 parts3GPL-3.0
  • 4 layers60.6 × 100 mmTheremin, the printed circuit board in 3D

    Theremin

    adeboni/eurorack

    This repository stores various eurorack module designs I've made

    110 parts1GPL-3.0

Questions

How big is the Iv grapher PCB?

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Iv grapher use?

75 parts, built around the LM358, MC34063, MCP3302-CI/P and MCP4921-E/SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Iv grapher KiCad files?

From the mihtjel/iv-grapher repository on GitHub, at the commit this page was made from: the board is hardware/iv-grapher.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Iv grapher design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).