Skip to the content
12345678

MCP16311-E/MS

Microchip TechnologyExtended

-40℃~+125℃ 1 1A 2V~24V 4.4V~30V 44uA 500kHz Adjustable Buck Buck Built-in Yes MSOP-8 DC-DC Converters ROHS

Part id
microchip/MCP16311-E/MS
Category
DC DC Converters
Package
MSOP-8
Pins
8
In stock
3,163 at JLCPCB (C627024)
Used on
4 open-source boards

Overview

The MCP16311-E/MS is a DC DC Converter made by Microchip Technology in a MSOP-8 package with 8 pins. -40℃~+125℃ 1 1A 2V~24V 4.4V~30V 44uA 500kHz Adjustable Buck Buck Built-in Yes MSOP-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP16311-E_MS, from EasyEDA) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 3,163 are in stock at JLCPCB (part C627024). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1Vfb2Vcc3EN4Vin5Pgnd6SW7BOOST8Agnd
EasyEDA_Cloud:MCP16311-E_MSFrom EasyEDA

Footprint

12345678
Package_SO:MSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the MCP16311-E/MS
PinNameType
1VfbUnspecified
2VccUnspecified
3ENUnspecified
4VinUnspecified
5PgndUnspecified
6SWUnspecified
7BOOSTUnspecified
8AgndUnspecified

Open-source boards using it

4
  • 2 layers75 × 35 mmCANPower, the printed circuit board in 3D

    CANPower

    RaphWeyman/CANPower

    Accessory power controller for BMW CAN bus bikes

    66 parts10GPL-2.0
  • 4 layers53.3 × 68.6 mmHamShield1, the printed circuit board in 3D

    HamShield1

    EnhancedRadioDevices/HamShield1

    HamShield 1.0 Hardware

    381 parts8
  • 2 layers110 × 82 mmInvertor, the printed circuit board in 3D

    Invertor

    victorstoica114/Invertor_board

    This repository contains an ESP-IDF firmware for an ESP32 board that bridges, translates, decodes, and exposes battery/inverter communication over CAN and RS485.

    151 parts1
  • 4 layers103 × 126 mmSenzori iradiere, the printed circuit board in 3D

    Senzori iradiere

    cs-pub-ro/smart-solar-irradiance-sensor

    Open-source hardware & software for a smart wireless sensor that measures solar irradiance.

    351 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP16311-E/MS?

Yes. The symbol is EasyEDA_Cloud:MCP16311-E_MS and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP16311-E/MS?

MSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP16311-E/MS datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP16311-E/MS?

JLCPCB lists it as part C627024, with 3,163 in stock; the sellers' links on this page open their listings.

What can replace the MCP16311-E/MS?

Parts like it in the library: the PAM2401SCADJ by Diodes Incorporated, the TPS62160DGKR by Texas Instruments, the ADP1613ARMZ-R7 by Analog Devices and the RT9277BGF by Richtek Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP16311-E/MS?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.