Skip to the content
PCBKitNew board
ADP1613ARMZ-R7 on a board, in 3D

ADP1613ARMZ-R7

Analog Devices

-40℃~+125℃ 1 1.35mA 2.5V~5.5V 2A 650kHz~1.3MHz Adjustable Boost Boost Built-in No MSOP-8 DC-DC Converters ROHS

Extended
DatasheetJLCPCBLCSCadi/ADP1613ARMZ-R7
Category
DC DC Converters
Package
MSOP-8
Pins
8

Overview

The ADP1613ARMZ-R7 is a DC DC Converter made by Analog Devices in a MSOP-8 package with 8 pins. -40℃~+125℃ 1 1.35mA 2.5V~5.5V 2A 650kHz~1.3MHz Adjustable Boost Boost Built-in No MSOP-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (ADP1613ARMZ-R7:ADP1613ARMZ-R7, from Antmicro) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 1,577 are in stock at JLCPCB (part C132279). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

COMP1FB2EN3GND4SW5VIN6FREQ7SS8
ADP1613ARMZ-R7:ADP1613ARMZ-R7From Antmicro

Footprint

12345678
Package_SO:MSOP-8_3x3mm_P0.65mmFrom KiCad's library

Parameters

13
Features
Load disconnect
Frequency - Switching
650kHz~1.3MHz
Function
Boost
Number of Outputs
1
Operating Temperature
-40℃~+125℃
Output Current
2A
Output Type
Adjustable
Output Voltage
2.5V~20V
Quiescent Current
1.35mA
Switch tube (built-in/external)
Built-in
Synchronous Rectifier
No
Topology
Boost
Voltage - Supply
2.5V~5.5V

Order codes

1

Pinout

8
The pins of the ADP1613ARMZ-R7
PinNameType
1COMPInput
2FBInput
3ENInput
4GNDPower in
5SWPower out
6VINPower in
7FREQInput
8SSInput

Open-source boards using it

All 2
  • 4 layers96 × 44 mmAroma, the printed circuit board in 3D

    Aroma

    tristan-yk/Aroma

    PCB design files and firmware for multi-channel diffuser driver board.

    108 parts
  • 4 layers377.3 × 130.4 mmRf frontend, the printed circuit board in 3D

    Rf frontend

    wzwqoo/fmcw_10ghz_radar

    A single-board 1TX / 3RX, 10 GHz FMCW radar, its Artix-7 range–Doppler–CFAR backend, and the carrier board that mounts the radar alongside a global-shutter camera and an impact microphone.

    351 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/adi/ADP1613ARMZ-R7" title="ADP1613ARMZ-R7 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/adi/ADP1613ARMZ-R7.jpg" alt="ADP1613ARMZ-R7" width="1200" height="900">
A picture that opens the part, for a README
[![ADP1613ARMZ-R7](https://pcbkit.io/embed/parts/adi/ADP1613ARMZ-R7.jpg?size=s)](https://pcbkit.io/parts/adi/ADP1613ARMZ-R7)

Questions

Is there a KiCad symbol and footprint for the ADP1613ARMZ-R7?

Yes. The symbol is ADP1613ARMZ-R7:ADP1613ARMZ-R7 and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP1613ARMZ-R7?

MSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the ADP1613ARMZ-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP1613ARMZ-R7?

JLCPCB lists it as part C132279, with 1,577 in stock; the sellers' links on this page open their listings.

What can replace the ADP1613ARMZ-R7?

Parts like it in the library: the LP6230BMSF by LOWPOWER, the LP6230CMSF by LOWPOWER, the MPQ1542DK-LF-Z by Monolithic Power Systems and the LTC1771EMS8#PBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP1613ARMZ-R7?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8