Skip to the content
12345678

AT24C16D-SSHM-T

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 1.7V~3.6V 100 Years 16Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHS

Part id
microchip/AT24C16D-SSHM-T
Category
EEPROM
Package
SOIC-8
Pins
8
In stock
6,652 at JLCPCB (C615966)
Used on
4 open-source boards

Overview

The AT24C16D-SSHM-T is an EEPROM made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 1.7V~3.6V 100 Years 16Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:FEP24C16YSOP8G_TR, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6,652 are in stock at JLCPCB (part C615966). 4 open-source boards in 2 repositories on GitHub use it.

Symbol

1NC2NC3NC4GND5SDA6SCL7WP8VCC
EasyEDA_Cloud:FEP24C16YSOP8G_TRFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the AT24C16D-SSHM-T
PinNameType
1NCUnspecified
2NCUnspecified
3NCUnspecified
4GNDUnspecified
5SDAUnspecified
6SCLUnspecified
7WPUnspecified
8VCCUnspecified

Open-source boards using it

4
  • 4 layers33.6 × 63.5 mmEEN60002020, the printed circuit board in 3D

    EEN60002020

    2ARC/EthercatSlave

    An ethercat slave based on LAN9252

    99 parts8GPL-3.0
  • 2 layers41.3 × 34.6 mmCurrent measurement extension, the printed circuit board in 3D

    Current measurement extension

    stephaneamans/app-home_automation

    The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO.

    18 parts
  • 2 layers78.7 × 50.6 mmFour relays extension, the printed circuit board in 3D

    Four relays extension

    stephaneamans/app-home_automation

    The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO.

    33 parts
  • 2 layers41.3 × 50.7 mmTwo relays extension, the printed circuit board in 3D

    Two relays extension

    stephaneamans/app-home_automation

    The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO.

    19 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AT24C16D-SSHM-T?

Yes. The symbol is EasyEDA_Cloud:FEP24C16YSOP8G_TR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AT24C16D-SSHM-T?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the AT24C16D-SSHM-T datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the AT24C16D-SSHM-T?

JLCPCB lists it as part C615966, with 6,652 in stock; the sellers' links on this page open their listings.

What can replace the AT24C16D-SSHM-T?

Parts like it in the library: the M24C64-RMN6TP by STMicroelectronics, the M24512-RMN6TP by STMicroelectronics, the AT24C08C-SSHM-T by Microchip Technology and the AT24C256C-SSHL-T by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AT24C16D-SSHM-T?

4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.