Skip to the content
12345678

24FC512-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 1MHz 200 Years 512Kbit 5ms I2C PDIP-8 EEPROM ROHS

Part id
microchip/24FC512-I/P
Category
EEPROM
Package
PDIP-8
Pins
8
In stock
3 at JLCPCB (C613657)
Used on
6 open-source boards

Overview

The 24FC512-I/P is an EEPROM made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 1MHz 200 Years 512Kbit 5ms I2C PDIP-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MR44V064BMAZAATL, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 3 are in stock at JLCPCB (part C613657). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1A02A13A24VSS5SDA6SCL7WP8VCC
EasyEDA_Cloud:MR44V064BMAZAATLFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the 24FC512-I/P
PinNameType
1A0Unspecified
2A1Unspecified
3A2Unspecified
4VSSUnspecified
5SDAUnspecified
6SCLUnspecified
7WPUnspecified
8VCCUnspecified

Open-source boards using it

6
  • 2 layers65 × 59 mmMender shield, the printed circuit board in 3D

    Mender shield

    joelguittet/mender-shield

    The Mender Shield illustrates the capability to run a Mender client on heterogeneous platforms

    54 parts5Apache-2.0
  • 2 layers40 × 30 mmTemperature logger, the printed circuit board in 3D

    Temperature logger

    H-S-S-11/attiny-temperature-logger

    Temperature logger using a RTC, EEPROM, and Temperature sensor controled over I2C by an ATTiny

    20 parts1
  • 4 layers48 × 74.4 mmLAN9252 Junction, the printed circuit board in 3D

    LAN9252 Junction

    UofA-SPEAR/pcb_designs_2026

    Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

    162 parts
  • 8 layers59.3 × 41.4 mmUMyriad7002, the printed circuit board in 3D

    UMyriad7002

    myriadrf/reference-development-kit

    The Myriad-RF Reference Hardware design files and firmware

    186 parts49
  • 8 layers112.1 × 41.4 mmUMyriad7002-append, the printed circuit board in 3D

    UMyriad7002-append

    myriadrf/reference-development-kit

    The Myriad-RF Reference Hardware design files and firmware

    361 parts49
  • 4 layers45 × 60 mmLAN9252, the printed circuit board in 3D

    LAN9252

    UofA-SPEAR/pcb_designs_2026

    Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

    97 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 24FC512-I/P?

Yes. The symbol is EasyEDA_Cloud:MR44V064BMAZAATL and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 24FC512-I/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the 24FC512-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the 24FC512-I/P?

JLCPCB lists it as part C613657, with 3 in stock; the sellers' links on this page open their listings.

What can replace the 24FC512-I/P?

Parts like it in the library: the 24C02N(XBLW) by XBLW, the 24C16N(XBLW) by XBLW, the AT24C08N by HGSEMI and the AT24C32AN/HG by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 24FC512-I/P?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.