
EtherCatDevBoard V1-1
UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.
LAN9252 Junction is an open-source printed circuit board by UofA-SPEAR, from the UofA-SPEAR/pcb_designs_2026 repository on GitHub. It is a 4-layer board of 48 × 74.4 mm with 162 parts on 146 nets, routed with 1,624 tracks and 200 vias.
It is built around the AP63203WU, 24FC512-I/P and H1102NLT, with the SM04B-GHS-TB and SM02B-GHS-TB among its other parts. Its parts include 67 capacitors, 59 resistors, 7 diodes, 7 connectors and 5 ICs.
Repository for SPEAR 2026 PCB designs. KiCad is used as the PCB design software.
Before opening any KiCad projects in this repository, the SPEAR_PCB_2026_DIR environment variable must be set as follows:
Figure 1: Configuring KiCad file paths.
Figure 2: Adding a new environment variable.
Figure 3: Creating the SPEAR_PCB_2026_DIR environment variable.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C11, C12, C13, C14, C15, C16, C17, C32, C33, C35, C36, C38, C39, C41 +10 |
| 16 | 10p | Capacitor_SMD:C_0402_1005Metric | C18, C19, C20, C21, C22, C23, C24, C25, C48, C49, C50, C51, C52, C53, C54, C55 |
| 16 | 49.9R 1% | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10, R11, R12, R13, R14, R34, R35, R36, R37, R38, R39, R40, R41 |
| 8 | 75R 1% | Resistor_SMD:R_0402_1005Metric | R18, R19, R20, R21, R45, R46, R47, R48 |
| 7 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7 |
| 6 | 0R | Resistor_SMD:R_0402_1005Metric | R3, R15, R16, R30, R42, R43 |
| 6 | 10kR | Resistor_SMD:R_0402_1005Metric | R24, R25, R26, R51, R52, R53 |
| 6 | BLM18EG221SN1D | SPEAR_FOOTPRINTS:Ferrite_bead | FB1, FB3, FB4, FB5, FB7, FB8 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R17, R22, R44, R49, R59 |
| 4 | 1000 pF | Capacitor_SMD:C_0402_1005Metric | C28, C29, C58, C59 |
| 4 | 141 R | Resistor_SMD:R_0402_1005Metric | R5, R6, R32, R33 |
| 4 | 18pF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C31, C34 |
| 4 | 22n | Capacitor_SMD:C_0402_1005Metric | C26, C27, C56, C57 |
| 4 | 2kR | Resistor_SMD:R_0402_1005Metric | R28, R29, R55, R56 |
| 4 | H1102NLT | SPEAR_FOOTPRINTS:XFMR_H1102NLT | T1, T2, T3, T4 |
| 4 | SM04B-GHS-TB | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1, J2, J3, J4 |
| 2 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C30, C60 |
| 2 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C66, C67 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R57, R58 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C61, C62 |
| 2 | 12.1k | Resistor_SMD:R_0402_1005Metric | R4, R31 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7, C37 |
| 2 | 22uF | SPEAR_MOTORCONTRLLER:CAP_C3225X7R1C226M250AC | C64, C65 |
| 2 | 24FC512 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | 25MHz | SPEAR_FOOTPRINTS:Y_Wurth_WE-XTAL_Quartz-HC49-4HSMX | Y1, Y2 |
| 2 | 270R | Resistor_SMD:R_0402_1005Metric | R27, R54 |
| 2 | 4.7kR | Resistor_SMD:R_0402_1005Metric | R23, R50 |
| 2 | 470 pF | Capacitor_SMD:C_0402_1005Metric | C10, C40 |
| 2 | 4K7 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x02_Pin | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J8, J9 |
| 2 | FerriteBead | SPEAR_FOOTPRINTS:Ferrite_bead | FB2, FB6 |
| 2 | LAN9252_ML | SPEAR_FOOTPRINTS:LAN9252_QFN UPDATED | U1, U3 |
| 1 | 150nF | SPEAR_MOTORCONTRLLER:CAP_CC1206_YAG | C63 |
| 1 | 2A | SPEAR_MOTORCONTRLLER:FUSE_36912000440 | F3 |
| 1 | 3.9uH | SPEAR_BUCK_CONVERTER:L_Wurth_WE-LHMI-1040_L1 | L1 |
| 1 | AP63203WU | SPEAR_MOTORCONTRLLER:AP63203WU-7_DIO-L | U5 |
| 1 | LOGO | SPEAR_logos:spear_logo_10.0x10 | G*** |
| 1 | SM02B-GHS-TB | SPEAR_POWERJUCTION:CONN_SM02B-GHS_JST | J5 |

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

UofA-SPEAR/pcb_designs_2026
Repository for SPEAR 2026 PCB designs. PCB design software is KiCad.

axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

stef1029/trilab-floating-platform
Head-fixed floating platform for studying sensory-guided spatial orienting in mice — hardware, firmware and control software.

Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..

nickraymond/nereus_Pi_shield_ADIN2111
A Raspberry Pi Zero 2W shield built from a copy of the Sofar Bristlemouth mote: ADIN2111 two-port 10BASE-T1L with PoDL, powered from the bus, 5 V for the Pi, a 24 V payload port, and the Sofar mote's power path…

joelguittet/mender-shield
The Mender Shield illustrates the capability to run a Mender client on heterogeneous platforms

H-S-S-11/attiny-temperature-logger
Temperature logger using a RTC, EEPROM, and Temperature sensor controled over I2C by an ATTiny

myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware

It measures 48 × 74.4 mm and has 4 copper layers, 1.6 mm thick.
162 parts, built around the AP63203WU, 24FC512-I/P, H1102NLT and SM04B-GHS-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UofA-SPEAR/pcb_designs_2026 repository on GitHub, at the commit this page was made from: the board is SPEAR_PCB_Designs/LAN9252_Junction/LAN9252_Junction.kicad_pcb and its schematic SPEAR_PCB_Designs/AP63203BuckConverter/AP63203BuckConverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask UofA-SPEAR before reusing the design.