Skip to the content
12

SMAJ33CA

MDDExtended

-65℃~+150℃ 1uA 33V 40.6V 400W@10/1000us 53.3V 7.5A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS

Part id
mdd/SMAJ33CA
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AC(SMA)
Pins
2
In stock
193,967 at JLCPCB (C115251)
Used on
15 open-source boards

Overview

The SMAJ33CA is an ESD And Surge Protection made by MDD in a DO-214AC(SMA) package with 2 pins. -65℃~+150℃ 1uA 33V 40.6V 400W@10/1000us 53.3V 7.5A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:SMAJ33CA, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 193,967 are in stock at JLCPCB (part C115251). 15 open-source boards in 11 repositories on GitHub use it.

Symbol

Diode:SMAJ33CAFrom KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

Pinout

2
The pins of the SMAJ33CA
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

15See all 15
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT
  • 2 layers50.8 × 68.6 mmMCU Board, the printed circuit board in 3D

    MCU Board

    caipiblack/STM32-CAN-Bus-board

    This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus

    26 parts5GPL-3.0
  • 2 layers36 × 72 mmHCP Bridge, the printed circuit board in 3D

    HCP Bridge

    JonasE99/HCP-Bridge

    🚧 WIP – not yet manufactured or tested. KiCad PCB (one per door) connecting Hörmann series 4 garage door operators (ProMatic/SupraMatic, BUS/RJ12) to Loxone via ESP32-S3 and Wi-Fi.

    53 parts1
  • 6 layers55 × 35 mmTACCO, the printed circuit board in 3D

    TACCO

    Stab-Rabbit-coding/Serenity-UAV

    A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..

    163 parts1CERN-OHL-W-2.0
  • 4 layers67.4 × 67.4 mmSCLF Gripper, the printed circuit board in 3D

    SCLF Gripper

    Tknika-SCLF/sclf-gripper

    Deskargatu eta instalatu Antigravity bere webgune ofizialetik. VSCode/Windsurf-en fork bat da eta modu berean funtzionatzen du.

    78 parts1
  • 2 layers66.5 × 21 mmPcb design, the printed circuit board in 3D

    Pcb design

    harneethnatarajan/diy-oscilloscope

    DIY oscilloscope built around an ESP32 (in progress).

    18 parts
  • 4 layers106 × 110 mmRearCircuitBoard 10, the printed circuit board in 3D

    RearCircuitBoard 10

    ssbingo/samba-solar-track

    Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)

    329 parts
  • 4 layers128 × 128 mmSF 01 Compute Board, the printed circuit board in 3D

    SF 01 Compute Board

    sandgum/Triangulate-SF_01-Speaker-Frame

    A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP

    334 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMAJ33CA?

Yes. The symbol is Diode:SMAJ33CA and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMAJ33CA?

DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.

Where is the SMAJ33CA datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the SMAJ33CA?

JLCPCB lists it as part C115251, with 193,967 in stock; the sellers' links on this page open their listings.

What can replace the SMAJ33CA?

Parts like it in the library: the SMAJ33CA by hongjiacheng, the SMAJ33CA by GOODWORK, the SMAJ33CA by 晶导微电子 and the SMAJ33A by MDD. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMAJ33CA?

15 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.