Skip to the content
12345

74AHCT1G04GV

MDDExtended

-40℃~+125℃ 1 1uA 2V 3.7V 4.5V~5.5V 4ns@5V,50pF 550mV 74AHCT 800mV 8mA 8mA SOT-23-5L Inverters ROHS

Part id
mdd/74AHCT1G04GV
Category
Inverters
Package
SOT-23-5L
Pins
5
In stock
2,884 at JLCPCB (C52140419)
Used on
14 open-source boards

Overview

The 74AHCT1G04GV is an inverter made by MDD in a SOT-23-5L package with 5 pins. -40℃~+125℃ 1 1uA 2V 3.7V 4.5V~5.5V 4ns@5V,50pF 550mV 74AHCT 800mV 8mA 8mA SOT-23-5L Inverters ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74AHCT1G04, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,884 are in stock at JLCPCB (part C52140419). 14 open-source boards in 11 repositories on GitHub use it.

Symbol

23GND45VCC
74xGxx:74AHCT1G04From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the 74AHCT1G04GV
PinNameType
1NCNot connected
2—Input
3GNDPower in
4—Output
5VCCPower in

Open-source boards using it

14See all 14
  • 4 layers101.6 × 101.6 mmSbc, the printed circuit board in 3D

    Sbc

    dpicken/atari-hw

    Hardware for Atari 8-bit projects

    118 parts6MIT
  • 2 layers150 × 300 mmRegisters, the printed circuit board in 3D

    Registers

    pottsali/cpu-pub

    Homebrew CPU project

    553 parts3
  • 2 layers127 × 90 mmRadio usb, the printed circuit board in 3D

    Radio usb

    SP8EBC/radio-usb-interface

    USB <--> Land Mobile Radio interace with full ground isolation on 2way audio and PTT control

    225 parts3
  • 4 layers253 × 169.1 mmDragon32, the printed circuit board in 3D

    Dragon32

    jimbro1000/Dragon32Rev3Proto

    SMD Prototype of Dragon32 Rev3

    199 parts2MIT
  • 2 layers81.9 × 99.4 mmZ80badgev2 BACKUP, the printed circuit board in 3D

    Z80badgev2 BACKUP

    12zcab/Z80BadgeV2

    Z80 Badge V2 for GadgetMarket@ HackClub!

    29 parts1
  • 4 layers191 × 229 mmDragonRevX4Plus, the printed circuit board in 3D

    DragonRevX4Plus

    jimbro1000/DragonRevX4KSEdition

    Dragon Rev X4 Kitchen Sink

    244 parts1
  • 2 layers140 × 50 mmYarrow counter basic, the printed circuit board in 3D

    Yarrow counter basic

    alplix/yarrow

    Open firmware for the FNIRSI GC-03 radiation detector

    62 partsGPL-3.0
  • 2 layers100.4 × 45.7 mmKiss sdr r2, the printed circuit board in 3D

    Kiss sdr r2

    jerryok826/Simple-SDR

    Simple SDR Is a basic Software defined receiver.

    88 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74AHCT1G04GV?

Yes. The symbol is 74xGxx:74AHCT1G04 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74AHCT1G04GV?

SOT-23-5L, with 5 pins. Its footprint is drawn on this page.

Where is the 74AHCT1G04GV datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the 74AHCT1G04GV?

JLCPCB lists it as part C52140419, with 2,884 in stock; the sellers' links on this page open their listings.

What can replace the 74AHCT1G04GV?

Parts like it in the library: the SN74LVC1G14DBV by Texas Instruments, the SN74LVC1G14DBVR by UMW, the SN74LVC1G04DBV by Texas Instruments and the NC7S04M5X by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74AHCT1G04GV?

14 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.