
AOS16 Double Buffer
AJain9199/AOS16
Table of Contents About The Project Pictures Technical Details Directory Structure To-Do Acknowledgments

Z80 Badge V2 for GadgetMarket@ HackClub!
Z80badgev2 BACKUP is an open-source printed circuit board by 12zcab, from the 12zcab/Z80BadgeV2 repository on GitHub. It is a 2-layer board of 81.9 × 99.4 mm with 29 parts on 68 nets, routed with 982 tracks and 107 vias.
It is built around the Z84C0010PEG, 74AHCT1G32GV and 74AHCT1G04GV. Its parts include 11 switches, 7 ICs, 6 resistors, 2 connectors and 1 crystal. It belongs with the retro computing and games boards of this library.





its a small Z80 Computer with 32kByte of EEPROM and 32kByte of SRAM. it have a minimum setup with practical IO components like LCD1602 and Buttons
Programming this device require you to burn a custom-OS of it or use Dupont Wire to connect its IO PinHeaders to a EEPROM programmer while pausing the whole device and power off.
for BOM details please refer to BOM.csv.
Feel free to open a Issue on GitHub or DM HackClub Slack @12zcab.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Input | Button_Switch_THT:SW_PUSH_6mm | SW2, SW3, SW6, SW7, SW8, SW9, SW10, SW11 |
| 5 | 10kohm | PCM_Resistor_THT_AKL:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 2 | 74AHCT1G32 | PCM_Package_TO_SOT_SMD_AKL:SOT-23-5_HandSoldering | U5, U7 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 10kohm potentiometer | PCM_Potentiometer_THT_AKL:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 220ohm | PCM_Resistor_THT_AKL:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 28C256 SOP28 | Package_SO:SOP-28_8.4x18.16mm_P1.27mm | U3 |
| 1 | 74AHCT1G04 | PCM_Package_TO_SOT_SMD_AKL:SOT-23-5_HandSoldering | U6 |
| 1 | ACO-xxxMHz | Oscillator:Oscillator_DIP-14 | Y1 |
| 1 | Bus Release | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW4 |
| 1 | HM 62256 SOP28 | Package_SO:SOP-28_8.4x18.16mm_P1.27mm | U4 |
| 1 | Power | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW5 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
| 1 | Z84C0010P | Package_DIP:SMDIP-40_W15.24mm | U1 |
| 1 | Z84C20 | Package_DIP:SMDIP-40_W15.24mm | U2 |

AJain9199/AOS16
Table of Contents About The Project Pictures Technical Details Directory Structure To-Do Acknowledgments


laenzlinger/granit
Custom carrier board for Raspberry Pi CM4/CM5 — minimal offsite backup appliance with JMS578 USB-to-SATA bridge

lolakkalol/6502-computer-project
A 6502-based computer project! Explore the docs » View Demo Programs · Report Bug · Request Feature


KITTY-6502/hardware
the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.


It measures 81.9 × 99.4 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the Z84C0010PEG, 74AHCT1G32GV and 74AHCT1G04GV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 12zcab/Z80BadgeV2 repository on GitHub, at the commit this page was made from: the board is z80badgev2/z80badgev2_BACKUP.kicad_pcb and its schematic z80badgev2/z80badgev2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 12zcab before reusing the design.