Skip to the content
12

LTL-307G

Lite-OnExtended

-55℃~+100℃ 100mW 19mcd 2.1V 20mA 50° 565nm 569nm 5mm round lamp head Discrete Diode Green Diffused Lens Yellow Green 插件,D=5mm LED Indication - Discrete ROHS

Part id
lite-on/LTL-307G
Category
LED Indication, Discrete
Package
插件,D=5mm
Pins
2
In stock
225 at JLCPCB (C125080)
Used on
3 open-source boards

Overview

The LTL-307G is a LED Indication, Discrete made by Lite-On in a 插件,D=5mm package with 2 pins. -55℃~+100℃ 100mW 19mcd 2.1V 20mA 50° 565nm 569nm 5mm round lamp head Discrete Diode Green Diffused Lens Yellow Green 插件,D=5mm LED Indication - Discrete ROHS.

PCBKit's library has its KiCad symbol (Device:LED, from KiCad's library) and its footprint (EasyEDA_Cloud:RES-TH_L7.6-W2.5-P2.54-D0.8, from EasyEDA), ready for a KiCad board. 225 are in stock at JLCPCB (part C125080). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

Device:LEDFrom KiCad's library

Footprint

12
EasyEDA_Cloud:RES-TH_L7.6-W2.5-P2.54-D0.8From EasyEDA

Pinout

2
The pins of the LTL-307G
PinNameType
1KPassive
2APassive

Open-source boards using it

3
  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers76.2 × 66 mmBeacon Detector Filter Schematic, the printed circuit board in 3D

    Beacon Detector Filter Schematic

    Azzu-bear/sluggers-of-the-lost-goal

    Autonomous ball-shooting competition robot (ECE 118 Mechatronics final project): PIC32 hierarchical state machines + ESP32-C3 sensor front end

    66 parts
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LTL-307G?

Yes. The symbol is Device:LED and the footprint EasyEDA_Cloud:RES-TH_L7.6-W2.5-P2.54-D0.8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LTL-307G?

插件,D=5mm, with 2 pins. Its footprint is drawn on this page.

Where is the LTL-307G datasheet?

Lite-On publishes it: the Datasheet link on this page opens it.

Where can I order the LTL-307G?

JLCPCB lists it as part C125080, with 225 in stock; the sellers' links on this page open their listings.

What can replace the LTL-307G?

Parts like it in the library: the SSL-LX5093UWC/H by Lumex, the L-5T47UB5C-AHV by PARALIGHT, the 333-2SURC/S530-A3-L by Everlight Electronics and the 333-2SURT/S530-A3 by Everlight Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LTL-307G?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.