
V3 Connector + IRLED
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
Lite-OnExtended
19mcd 20mA 2V 50° 623nm 635nm Red Red Lens 插件,D=5mm LED Indication - Discrete ROHS
The LTL-307E is a LED Indication, Discrete made by Lite-On in a 插件,D=5mm package with 2 pins. 19mcd 20mA 2V 50° 623nm 635nm Red Red Lens 插件,D=5mm LED Indication - Discrete ROHS.
PCBKit's library has its KiCad symbol (Device:LED, from KiCad's library) and its footprint (EasyEDA_Cloud:RES-TH_L7.6-W2.5-P2.54-D0.8, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C575489). 2 open-source boards in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | K | Passive |
| 2 | A | Passive |

PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
Yes. The symbol is Device:LED and the footprint EasyEDA_Cloud:RES-TH_L7.6-W2.5-P2.54-D0.8, both drawn on this page. PCBKit places them on a board for you when you design with it.
插件,D=5mm, with 2 pins. Its footprint is drawn on this page.
Lite-On publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C575489, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the XL-502SURD by XINGLIGHT, the XL-502UGD by XINGLIGHT, the XL-502UGC by XINGLIGHT and the XL-502UWC by XINGLIGHT. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.