Skip to the content
12345678910111213141516171819202122232425262728293031323334353637

TLE7230R

Infineon TechnologiesExtended

-40℃~+150℃ 1A 4.5V~5.5V 8 800mΩ Active High、Active Low Low Side Switch BSSOP-36-EP-11mm Power Distribution Switches ROHS

Part id
infineon/TLE7230R
Category
Power Distribution Switches
Package
BSSOP-36-EP-11mm
Pins
37
In stock
0 at JLCPCB (C539992)
Used on
1 open-source board

Overview

The TLE7230R is a power Distribution Switche made by Infineon Technologies in a BSSOP-36-EP-11mm package with 37 pins. -40℃~+150℃ 1A 4.5V~5.5V 8 800mΩ Active High、Active Low Low Side Switch BSSOP-36-EP-11mm Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLE7230R, from EasyEDA) and its footprint (EasyEDA_Cloud:POWERSO-36_L15.9-W11.0-P0.65-LS14.2-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C539992). 1 open-source board in 1 repository on GitHub use it.

Symbol

1GND2NC3NC4OUT15OUT26IN17IN28VS9Reset10CS11PRG12IN313IN414OUT315OUT416NC17NC18GND19GND20NC21NC22OUT523OUT624NC25VDO26Fault27SO28SCLK29SI30NC31NC32OUT733OUT834NC35NC36GND37EP
EasyEDA_Cloud:TLE7230RFrom EasyEDA

Footprint

12345678910111213141516171819202122232425262728293031323334353637
EasyEDA_Cloud:POWERSO-36_L15.9-W11.0-P0.65-LS14.2-BLFrom EasyEDA

Pinout

37
The pins of the TLE7230R
PinNameType
1GNDUnspecified
2NCUnspecified
3NCUnspecified
4OUT1Unspecified
5OUT2Unspecified
6IN1Unspecified
7IN2Unspecified
8VSUnspecified
9ResetUnspecified
10CSUnspecified
11PRGUnspecified
12IN3Unspecified
13IN4Unspecified
14OUT3Unspecified
15OUT4Unspecified
16NCUnspecified
17NCUnspecified
18GNDUnspecified
19GNDUnspecified
20NCUnspecified
21NCUnspecified
22OUT5Unspecified
23OUT6Unspecified
24NCUnspecified
25VDOUnspecified
26FaultUnspecified
27SOUnspecified
28SCLKUnspecified
29SIUnspecified
30NCUnspecified
31NCUnspecified
32OUT7Unspecified
33OUT8Unspecified
34NCUnspecified
35NCUnspecified
36GNDUnspecified
37EPUnspecified

Open-source boards using it

1
  • 2 layers70.5 × 41.9 mmPower switch controller 3x2, the printed circuit board in 3D

    Power switch controller 3x2

    janelia-kicad/power_switch_controller_3x2

    This board controls up to 8 low-side power switches for turning on and off solenoids, relays, and resistive loads.

    25 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the TLE7230R?

Yes. The symbol is EasyEDA_Cloud:TLE7230R and the footprint EasyEDA_Cloud:POWERSO-36_L15.9-W11.0-P0.65-LS14.2-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLE7230R?

BSSOP-36-EP-11mm, with 37 pins. Its footprint is drawn on this page.

Where is the TLE7230R datasheet?

Infineon Technologies publishes it: the Datasheet link on this page opens it.

Where can I order the TLE7230R?

JLCPCB lists it as part C539992, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TLE7230R?

Parts like it in the library: the ISO1H811G by Infineon Technologies, the ISO1H812G by Infineon Technologies, the ISO1H801G by Infineon Technologies and the TLE6230GP by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLE7230R?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.