Skip to the content
12345678910111213141516171819202122232425262728293031323334353637

TLE6230GP

Infineon TechnologiesExtended

-40℃~+150℃ 1A 4.5V~5.5V 8 800mΩ Active High、Active Low Low Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Overcurrent Protection(OCP)、Overtemperature protection (OTP) DSO-36 Power Distribution Switches ROHS

Part id
infineon/TLE6230GP
Category
Power Distribution Switches
Package
DSO-36
Pins
37
In stock
0 at JLCPCB (C539974)
Used on
1 open-source board

Overview

The TLE6230GP is a power Distribution Switche made by Infineon Technologies in a DSO-36 package with 37 pins. -40℃~+150℃ 1A 4.5V~5.5V 8 800mΩ Active High、Active Low Low Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Overcurrent Protection(OCP)、Overtemperature protection (OTP) DSO-36 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLE6230GP, from EasyEDA) and its footprint (EasyEDA_Cloud:POWERSO-36_L15.9-W11.0-P0.65-LS14.2-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C539974). 1 open-source board in 1 repository on GitHub use it.

Symbol

1GND2NC3NC4OUT15OUT26IN17IN28VS9#RESET10#CS11PRG12IN313IN414OUT315OUT416NC17NC18GND19GND20NC21NC22OUT523OUT624NC25NC26#FAULT27SO28SCLK29SI30NC31NC32OUT733OUT834NC35NC36GND37EP
EasyEDA_Cloud:TLE6230GPFrom EasyEDA

Footprint

12345678910111213141516171819202122232425262728293031323334353637
EasyEDA_Cloud:POWERSO-36_L15.9-W11.0-P0.65-LS14.2-BLFrom EasyEDA

Pinout

37
The pins of the TLE6230GP
PinNameType
1GNDUnspecified
2NCUnspecified
3NCUnspecified
4OUT1Unspecified
5OUT2Unspecified
6IN1Unspecified
7IN2Unspecified
8VSUnspecified
9#RESETUnspecified
10#CSUnspecified
11PRGUnspecified
12IN3Unspecified
13IN4Unspecified
14OUT3Unspecified
15OUT4Unspecified
16NCUnspecified
17NCUnspecified
18GNDUnspecified
19GNDUnspecified
20NCUnspecified
21NCUnspecified
22OUT5Unspecified
23OUT6Unspecified
24NCUnspecified
25NCUnspecified
26#FAULTUnspecified
27SOUnspecified
28SCLKUnspecified
29SIUnspecified
30NCUnspecified
31NCUnspecified
32OUT7Unspecified
33OUT8Unspecified
34NCUnspecified
35NCUnspecified
36GNDUnspecified
37EPUnspecified

Open-source boards using it

1
  • 2 layers86 × 117 mmMotherBoard V2.1, the printed circuit board in 3D

    MotherBoard V2.1

    Montufar/Hexagro_MBV2.1

    Schematic, BOM and PCB layout of V2.1 Motherboard

    183 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the TLE6230GP?

Yes. The symbol is EasyEDA_Cloud:TLE6230GP and the footprint EasyEDA_Cloud:POWERSO-36_L15.9-W11.0-P0.65-LS14.2-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLE6230GP?

DSO-36, with 37 pins. Its footprint is drawn on this page.

Where is the TLE6230GP datasheet?

Infineon Technologies publishes it: the Datasheet link on this page opens it.

Where can I order the TLE6230GP?

JLCPCB lists it as part C539974, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TLE6230GP?

Parts like it in the library: the ISO1H811G by Infineon Technologies, the ISO1H812G by Infineon Technologies, the ISO1H801G by Infineon Technologies and the TLE6232GP by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLE6230GP?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.