Skip to the content
2 layers70.5 × 41.9 mmPower switch controller 3x2, the printed circuit board in 3D

This board controls up to 8 low-side power switches for turning on and off solenoids, relays, and resistive loads.

Size
70.5 × 41.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
28
Pads
136
Tracks, vias
227, 6
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
5 May 2017
Updated
23 Feb 2022

Overview

Power switch controller 3x2 is an open-source printed circuit board by janelia-kicad, from the janelia-kicad/power_switch_controller_3x2 repository on GitHub. It is a 2-layer board of 70.5 × 41.9 mm with 25 parts on 28 nets, routed with 227 tracks and 6 vias.

It is built around the TLE7230R. Its parts include 9 diodes, 9 inductors, 2 capacitors, 2 connectors and 1 IC. It belongs with the home automation and IoT boards of this library.

Main components

1

README

README.md

[blocked]

Repository Information

[blocked]

Description

This board controls up to 8 low-side power switches for turning on and off solenoids, relays, and resistive loads.

[blocked]

Images

img

img

[blocked]

Schematic

./schematic/power_switch_controller_3x2.pdf

img

img

[blocked]

Gerbers

Send gerbers zip file to your favorite PCB manufacturer for fabrication.

./gerbers/power_switch_controller_5x3_v1.1.zip

img

img

[blocked]

Bill of Materials

[blocked]

PCB Parts

ItemReference(s)QuantityPartNumberVendorDescription
1C11445-4536-1-NDdigikeyCAP CER 10UF 50V 10% X7S 1210
2C21399-13229-1-NDdigikeyCAP CER 0.1UF 100V X7R 1210
3D11568-11697-1-NDdigikeyDIODE SCHOTTKY 45V 10A CFP15
4D2 D3 D4 D5 D6 D7 D8 D98CMHD3595 CT-NDdigikeyDIODE GEN PURP 150V 150MA SOD123
5L1 L2 L3 L4 L5 L6 L7 L8 L99350-1723-NDdigikeyLED 2MM 24V VERTICAL RED PC MNT
6MDB12S1011E-16-NDdigikey16 Position Header Through Hole Male Pins
7P11CP-063BH-NDdigikeyCONN PWR JACK DC 2.5X5.5 8A T/H
8P21S9187-NDdigikeyCONN HEADR 2.54MM 16POS GOLD SMD
9SW11360-2610-NDdigikeySWITCH SLIDE SPST 0.4VA 28V
10U11TLE7230RCT-NDdigikeyIC SW SMART OCTAL LOWSIDE PDSO36

[blocked]

Supplemental Parts

ItemQuantityPartNumberVendorDescription
132WM2800-NDdigikeyCONN HOUSING 2POS .100 SINGLE
264WM2512-NDdigikeyCONN TERM FEMALE 22-24AWG GOLD
364WM2513-NDdigikeyCONN TERM FEMALE 24-30AWG GOLD
44AKC16H-NDdigikeyCONN IDC SKT 16POS W/POL 15 GOLD
51MC16M-300-NDdigikeyCBL RIBN 16COND 0.050 MULTI 300ft
64APK16B-NDdigikeyCONN IDC PIN 16POS 30AU NO LATCH
732WM2900-NDdigikeyCONN HOUSING 2POS .100 W/LATCH
864WM2570-NDdigikeyCONN TERM FEMALE 22-24AWG GOLD
964WM2572-NDdigikeyCONN SOCKET 24-30AWG CRIMP 30AU
1032WM2533-NDdigikeyCONN HOUSING MALE 2POS .100
1164WM2566-NDdigikeyCONN PIN 24-30AWG CRIMP 30GOLD
1264WM2567-NDdigikeyCONN TERM MALE 22-24AWG GOLD

[blocked]

Vendor Parts Lists

./bom/digikey_parts.csv

./bom/supplemental_digikey_parts.csv

[blocked]

Supplemental Documentation

[blocked]

Assembly Instructions

  • Solder header pins into the driver board, making note of TOP label. Insert header pins on bottom of board so that the long unsoldered header pins point down when the TOP label faces up.
  • Solder surface mount and through hole components onto the pcb.

Parts

25
QtyValueFootprintReferences
9LED_24Vpower_switch_controller_3x2:LED_555-3XXXL1, L2, L3, L4, L5, L6, L7, L8, L9
8diode_low_rev_currentpower_switch_controller_3x2:SOD-123D2, D3, D4, D5, D6, D7, D8, D9
10.1uFpower_switch_controller_3x2:SM1210C2
110uFpower_switch_controller_3x2:SM1210C1
1HEADER_02X08_SMDpower_switch_controller_3x2:HEADER_02x08_SMDP2
1MODULAR_DEVICE_BASE_3X2_MALEpower_switch_controller_3x2:MODULAR_DEVICE_BASE_3X2_MALEMDB1
1PWR_JACK_2.5x5.5power_switch_controller_3x2:DCJACK_2PIN_HIGHCURRENTP1
1SPST_SLIDE_ASpower_switch_controller_3x2:SPST_SLIDE_ASSW1
1TLE7230Rpower_switch_controller_3x2:PG-DSO-36U1
1diode_schottky_45V_10Apower_switch_controller_3x2:CFP15D1

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Power switch controller 3x2 PCB?

It measures 70.5 × 41.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power switch controller 3x2 use?

25 parts, built around the TLE7230R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power switch controller 3x2 KiCad files?

From the janelia-kicad/power_switch_controller_3x2 repository on GitHub, at the commit this page was made from: the board is power_switch_controller_3x2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power switch controller 3x2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask janelia-kicad before reusing the design.