Skip to the content
123

IRFP250MPBF

Infineon TechnologiesExtended

-55℃~+175℃ 1 N-channel 123nC 2.159nF 200V 214W 30A 315pF 4V 75mΩ@10V 83pF N-Channel TO-247AC-3 MOSFETs ROHS

Part id
infineon/IRFP250MPBF
Category
MOSFETs
Package
TO-247AC-3
Pins
3
In stock
20,000 at JLCPCB (C2676)
Used on
3 open-source boards

Overview

The IRFP250MPBF is a MOSFET made by Infineon Technologies in a TO-247AC-3 package with 3 pins. -55℃~+175℃ 1 N-channel 123nC 2.159nF 200V 214W 30A 315pF 4V 75mΩ@10V 83pF N-Channel TO-247AC-3 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (EasyEDA_Pro:to-247ac-3_l15.8-w5.0-p5.46-l, from EasyEDA Pro), ready for a KiCad board. 20,000 are in stock at JLCPCB (part C2676). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Pro:to-247ac-3_l15.8-w5.0-p5.46-lFrom EasyEDA Pro

Pinout

3
The pins of the IRFP250MPBF
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

3
  • 4 layers185 × 95 mmEL Load Analog, the printed circuit board in 3D

    EL Load Analog

    fietser28/EL-Load

    The DCL8010 electronic load module features a DC Electronic Load with several modes and protections. This project is the for the development boards for this project. There is a seperate git project for the firmware.

    344 parts15
  • 2 layers160 × 100 mmZavrsni rad, the printed circuit board in 3D

    Zavrsni rad

    anniberi/master-thesis

    Master's thesis: device for measuring the series resistance of PV panels. This device uses a MOSFET transistor as a variable load to measure the I-V curve of the PV panel.

    32 parts1
  • 2 layers49 × 49 mmEL Load Reverse Polarity, the printed circuit board in 3D

    EL Load Reverse Polarity

    fietser28/EL-Load

    The DCL8010 electronic load module features a DC Electronic Load with several modes and protections. This project is the for the development boards for this project. There is a seperate git project for the firmware.

    63 parts15

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IRFP250MPBF?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint EasyEDA_Pro:to-247ac-3_l15.8-w5.0-p5.46-l, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRFP250MPBF?

TO-247AC-3, with 3 pins. Its footprint is drawn on this page.

Where is the IRFP250MPBF datasheet?

Infineon Technologies publishes it: the Datasheet link on this page opens it.

Where can I order the IRFP250MPBF?

JLCPCB lists it as part C2676, with 20,000 in stock; the sellers' links on this page open their listings.

What can replace the IRFP250MPBF?

Parts like it in the library: the IRFP260NPBF by Infineon Technologies, the IRFP4768PBF by Infineon Technologies, the IRFP90N20DPBF by Infineon Technologies and the SPW47N60C3 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRFP250MPBF?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.