
Sensor epaper
Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.
Espressif SystemsExtended
QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHS
The ESP32-C3FN4 is a microcontroller made by Espressif Systems in a QFN-32-EP(5x5) package with 33 pins. QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (Espressif:ESP32-C3, from Espressif) and its footprint (Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2848860). 5 open-source boards in 5 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | LNA_IN | Input/output |
| 2 | VDD3P3 | Power in |
| 3 | VDD3P3 | Passive |
| 4 | XTAL_32K_P/ADC1_CH0 | Output |
| 5 | XTAL_32K_N/ADC1_CH1 | Input |
| 6 | GPIO2/ADC1_CH2 | Input/output |
| 7 | CHIP_EN | Input |
| 8 | GPIO3/ADC1_CH3 | Input/output |
| 9 | MTMS/GPIO4/ADC1_CH4 | Input/output |
| 10 | MTDI/GPIO5/ADC2_CH0 | Input/output |
| 11 | VDD3P3_RTC | Power in |
| 12 | MTCK/GPIO6 | Input/output |
| 13 | MTDO/GPIO7 | Input/output |
| 14 | GPIO8 | Input/output |
| 15 | GPIO9/BOOT | Input/output |
| 16 | GPIO10 | Input/output |
| 17 | VDD3P3_CPU | Power in |
| 18 | VDD_SPI/GPIO11 | Input/output |
| 19 | SPIHD/GPIO12 | Input/output |
| 20 | SPIWP/GPIO13 | Input/output |
| 21 | SPICS0/GPIO14 | Input/output |
| 22 | SPICLK/GPIO15 | Input/output |
| 23 | SPID/GPIO16 | Input/output |
| 24 | SPIQ/GPIO17 | Input/output |
| 25 | GPIO18/USB_D- | Input/output |
| 26 | GPIO19/USB_D+ | Input/output |
| 27 | U0RXD/GPIO20 | Input/output |
| 28 | U0TXD/GPIO21 | Input/output |
| 29 | XTAL_N | Output |
| 30 | XTAL_P | Input |
| 31 | VDDA | Power in |
| 32 | VDDA | Passive |
| 33 | GND | Power in |

Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.


bombarie/jaha-koo-eel
A robotic remote controlled eel. A prop for the play Haribo Kimchi.


zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
Yes. The symbol is Espressif:ESP32-C3 and the footprint Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.
Espressif Systems publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2848860, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ESP32-C3FH4 by Espressif Systems, the ESP32-C3 by Espressif Systems and the ESP32-C3FH4X by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.
5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.