
PI4ULS3V204LEX
Diodes IncorporatedExtended
-40℃~+85℃ 1 1.1V~3.6V 1.1V~3.6V 2Mbps、24Mbps 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C TSSOP-14 Translators, Level Shifters ROHS
- Part id
- diodes/PI4ULS3V204LEX
- Category
- Translators, Level Shifters
- Package
- TSSOP-14
- Pins
- 14
- In stock
- 83 at JLCPCB (C3001701)
- Used on
- 2 open-source boards
Overview
The PI4ULS3V204LEX is a translators, Level Shifter made by Diodes Incorporated in a TSSOP-14 package with 14 pins. -40℃~+85℃ 1 1.1V~3.6V 1.1V~3.6V 2Mbps、24Mbps 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C TSSOP-14 Translators, Level Shifters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PI4ULS3V204LEX, from EasyEDA) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 83 are in stock at JLCPCB (part C3001701). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
7- Supply, least
- 1.1 V · VCCA, recommended operating min · p. 3
- Supply, most
- 3.6 V · VCCA, recommended operating max · p. 3
- Supply, absolute maximum
- 5.5 V · VCCA, absolute max · p. 3
- Works from
- -40 °C · TA, operating ambient min · p. 3
- Works up to
- 85 °C · TA, operating ambient max · p. 3
- Takes working
- 1.2 µA · sum of ICCB and ICCA typical, VI = VCCI, IO = 0 A, EN high, both supplies 1.1–3.6 V · p. 3
- Data rate, most
- 24 Mbit/s · max push-pull data rate, VCCA = 3.3 V ±0.3 V, VCCB = 2.5 V ±0.2 V · p. 7
What it is and has
9- Function
- 4-bit bidirectional level shifter for open-drain and push-pull applications · p. 1
- Supply configuration
- Fully symmetric supply voltage · p. 1
- Supply voltage
- 1.1V to 3.6V on A Port and B Port · p. 1
- Direction control
- No direction-control signal needed · p. 1
- Power sequencing
- Non-preferential power-up sequencing · p. 1
- Integrated pull-ups
- 10 kΩ · p. 1
- Package option
- 14-pin TSSOP (L) · p. 1
- Package option
- 14-pin, 3.5x3.5 mm TQFN (ZB) · p. 1
- Package option
- 12-pin CSP (GA) · p. 1
Around it
1- cap 0.01μF to 0.1μF
- between VCCA and GND; Supply decoupling; ceramic recommended; place as close as possible to supply and ground pins and minimize connection traces. · p. 11
Specifications
96| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Storage Temperature | min -65 · max 150 oC | 3 | |
| DC Supply Voltage Port B | min -0.3 · max 5.5 V | 3 | |
| DC Supply Voltage Port A | min -0.3 · max 5.5 V | 3 | |
| Vi(A) referenced DC Input / Output Voltage | min -0.3 · max 5.5 V | 3 | |
| Vi(B) referenced DC Input / Output Voltage | min -0.3 · max 5.5 V | 3 | |
| Enable Control Pin DC Input Voltage | min -0.3 · max 5.5 V | 3 | |
| Short Circuit duration (I/O to GND) | max 40 mA | 3 | |
| VCCA Positive DC Supply Voltage VCCA | min 1.1 · max 3.6 V | 3 | |
| VCCB Positive DC Supply Voltage VCCB | min 1.1 · max 3.6 V | 3 | |
| Enable Control Pin Voltage VEN | min 0 · max 3.6 V | 3 | |
| I/O Pin Voltage VIO | min 0 · max 3.6 V | 3 | |
| Input Transition Rise or Fall Time Δt /ΔV | max 10 ns/V | 3 | |
| Operating Temperature Range TA | min -40 · max 85 °C | 3 | |
| B port Input LOW Voltage VILB | −40°C≤TA≤85°C; 1.1V≤Vcc≤3.6V | max 0.15 V | 3 |
| A port Input LOW Voltage VILA | −40°C≤TA≤85°C; 1.1V≤Vcc≤3.6V | max 0.15 V | 3 |
| B port Output LOW Voltage VOLB | −40°C≤TA≤85°C; 1.1V≤Vcc≤3.6V; B port sink current =1 mA | max 0.4 V | 3 |
| A port Output LOW Voltage VOLA | −40°C≤TA≤85°C; 1.1V≤Vcc≤3.6V; A port sink current =1 mA | max 0.4 V | 3 |
| VCCB Supply Current ICCB | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)=1.1V to 3.6V; VCC(B)=1.1V to 3.6V | typ 1 · max 3 uA | 3 |
| VCCB Supply Current ICCB | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)=1.1V, VCC(B)=1.8V | typ 0.6 · max 2 uA | 3 |
| VCCB Supply Current ICCB | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)= 3.6V, VCC(B)= 0V | max 1 uA | 3 |
| VCCB Supply Current ICCB | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)= 0V, VCC(B)=3.6V | max 1 uA | 3 |
| VCCA Supply Current ICCA | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)=1.1V to 3.6V; VCC(B)=1.1V to 3.6V | typ 0.2 · max 1 uA | 3 |
| VCCA Supply Current ICCA | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)= 3.6V, VCC(B)= 0V | max 1 uA | 3 |
| VCCA Supply Current ICCA | VI= VCCI; IO= 0A; EN= Low or High; VCC(A)= 0V, VCC(B)=3.6V | max 1 uA | 3 |
| I/O Tri−state Output Mode Leakage Current IOZ | −40°C≤TA≤85°C; 1.1V≤Vcc≤3.6V | typ 0.1 · max 1 uA | 4 |
| Control pin leakage Current II-EN | VI= VCCI or GND | max 1 uA | 4 |
| Pull−Up Resistors I/O A and B RPU | typ 10 kΩ | 4 | |
| EN Ci | VCC(A)= 3.3V, VCC(B)= 3.3V | max 0.5 pF | 4 |
| A port CiO | VCC(A)= 3.3V, VCC(B)= 3.3V | max 5 pF | 4 |
| B port CiO | VCC(A)= 3.3V, VCC(B)= 3.3V | max 5 pF | 4 |
| B port Rise Time tRB | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 20 nS | 4 |
| B port Fall Time tFB | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 25 nS | 4 |
| A port Rise Time tRA | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 20 nS | 4 |
| A port Fall Time tFA | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 20 nS | 4 |
| Enable Time tEN | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 4 |
| Disable Time tDIS | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 4 |
| Propagation Delay (Driving A) tPHL−A−B | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 9 nS | 4 |
| Propagation Delay (Driving A) tPLH−A−B | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 11 nS | 4 |
| Propagation Delay (Driving B) tPHL−B−A | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 9 nS | 4 |
| Propagation Delay (Driving B) tPLH−B−A | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 10 nS | 4 |
| Part−to−Part Skew tPPSKEW | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 1 nS | 4 |
| Maximum Data Rate MDR | VCCA= 1.2V±0.1V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 20 Mbps | 4 |
| B port Rise Time tRB | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 12 nS | 4 |
| B port Fall Time tFB | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 14 nS | 4 |
| A port Rise Time tRA | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 20 nS | 4 |
| A port Fall Time tFA | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 25 nS | 4 |
| Enable Time tEN | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 4 |
| Disable Time tDIS | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 4 |
| Propagation Delay (Driving A) tPHL−A−B | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 9 nS | 4 |
| Propagation Delay (Driving A) tPLH−A−B | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 11 nS | 4 |
| Propagation Delay (Driving B) tPHL−B−A | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 9 nS | 4 |
| Propagation Delay (Driving B) tPLH−B−A | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 10 nS | 4 |
| Part−to−Part Skew tPPSKEW | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 1 nS | 4 |
| Maximum Data Rate MDR | VCCA= 1.2V±0.1V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 20 Mbps | 4 |
| B port Rise Time tRB | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 12 nS | 4 |
| B port Fall Time tFB | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 18 nS | 4 |
| A port Rise Time tRA | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 16 nS | 4 |
| A port Fall Time tFA | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 30 nS | 4 |
| Enable Time tEN | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 4 |
| Disable Time tDIS | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 4 |
| Propagation Delay (Driving A) tPHL−A−B | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 8 nS | 4 |
| Propagation Delay (Driving A) tPLH−A−B | VCCA= 1.2V±0.1V, VCCB = 3.3V±0.3V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 11 nS | 4 |
| B port Rise Time tRB | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 6 nS | 7 |
| B port Fall Time tFB | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 11 nS | 7 |
| A port Rise Time tRA | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 6 nS | 7 |
| A port Fall Time tFA | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 7 nS | 7 |
| Enable Time tEN | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 120 nS | 7 |
| Disable Time tDIS | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 7 |
| Propagation Delay (Driving A) tPHL−A−B | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 4 nS | 7 |
| Propagation Delay (Driving A) tPLH−A−B | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 4 nS | 7 |
| Propagation Delay (Driving B) tPHL−B−A | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 5 nS | 7 |
| Propagation Delay (Driving B) tPLH−B−A | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 5 nS | 7 |
| Part−to−Part Skew tPPSKEW | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 1 nS | 7 |
| Maximum Data Rate MDR | VCCA= 3.3V±0.3V, VCCB = 1.8V±0.15V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 24 Mbps | 7 |
| B port Rise Time tRB | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 6 nS | 7 |
| B port Fall Time tFB | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 10 nS | 7 |
| A port Rise Time tRA | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 6 nS | 7 |
| A port Fall Time tFA | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 7 nS | 7 |
| Enable Time tEN | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 120 nS | 7 |
| Disable Time tDIS | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 200 nS | 7 |
| Propagation Delay (Driving A) tPHL−A−B | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 4 nS | 7 |
| Propagation Delay (Driving A) tPLH−A−B | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 4 nS | 7 |
| Propagation Delay (Driving B) tPHL−B−A | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 4 nS | 7 |
| Propagation Delay (Driving B) tPLH−B−A | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 4 nS | 7 |
| Part−to−Part Skew tPPSKEW | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 1 nS | 7 |
| Maximum Data Rate MDR | VCCA= 3.3V±0.3V, VCCB = 2.5V±0.2V; CLOAD = 15 pF; driver output impedance ≤ 50Ω; RLOAD = 1 MΩ; TA = -40°C to 85°C | max 24 Mbps | 7 |
| B port Rise Time tRB | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 300 nS | 7 |
| B port Fall Time tFB | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 30 nS | 7 |
| A port Rise Time tRA | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 300 nS | 7 |
| A port Fall Time tFA | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 30 nS | 7 |
| Propagation Delay (Driving A) tPHL−A−B | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 20 nS | 7 |
| Propagation Delay (Driving A) tPLH−A−B | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 260 nS | 7 |
| Propagation Delay (Driving B) tPHL−B−A | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 20 nS | 7 |
| Propagation Delay (Driving B) tPLH−B−A | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 260 nS | 7 |
| Part-to-Part Skew tPPSKEW | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | max 1 nS | 7 |
| Maximum Data Rate MDR | 1.1≤ VCCA≤ VCCB ≤ 3.6V, TA = -40°C to 85°C | min 2 Mbps | 7 |
Pins, by the datasheet
14- 1 VCCA
- A port supply voltage, 1.1 V to 3.6 V. · p. 2
- 2 A1
- Input/output A1. Referenced to VCCA. · p. 2
- 3 A2
- Input/output A2. Referenced to VCCA. · p. 2
- 4 A3
- Input/output A3. Referenced to VCCA. · p. 2
- 5 A4
- Input/output A4. Referenced to VCCA. · p. 2
- 6 NC
- Not Connect. · p. 2
- 7 GND
- Ground. · p. 2
- 8 EN
- Output enable, active High; pull low to place all outputs in 3-state mode. · p. 2
- 9 NC
- Not Connect. · p. 2
- 10 B4
- Input/output B4. Referenced to VCCB. · p. 2
- 11 B3
- Input/output B3. Referenced to VCCB. · p. 2
- 12 B2
- Input/output B2. Referenced to VCCB. · p. 2
- 13 B1
- Input/output B1. Referenced to VCCB. · p. 2
- 14 VCCB
- B port supply voltage, 1.1 V to 3.6 V. · p. 2
Open-source boards using it
2- 2 layers55 × 50 mm

- 4 layers34 × 30 mm

Autorouted
tokla-chiya/VL53L9_KICAD
Open VL53L9.kicadpro in KiCad, then open VL53L9.kicadsch. The schematic is complete; the PCB is still empty and needs placement/routing.
32 parts
Parts like it
8TXS0104EPW
TSSOP-14-40℃~+85℃ 1 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersNXS0104PWJ
TSSOP-14-40℃~+125℃ 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Auto Direction Detection、Power-Off Protection Bidirectional TSSOP-14 Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersTXB0104PW
TSSOP-14-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional CMOS CMOS Tri-State TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersNXB0104PWJ
TSSOP-14-40℃~+125℃ 1.2V~3.6V 1.65V~5.5V 100Mbps 2 4 Auto Direction Detection、Power failure protection、输出使能高阻 Bidirectional Tri-State TSSOP-14 Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersTXU0304PW
TSSOP-14-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXU0104PW
TSSOP-14-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersLSF0204PW
TSSOP-14-40℃~+125℃ 1 1.8V~5.5V 4 800mV~4.5V Auto Direction Detection Bidirectional Push-Pull、Open-drain TTL TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXB0104QPWRQ1
TSSOP-14-40℃~+125℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Automatic direction detection、Power-off protection、Output enable high-impedance Bidirectional CMOS CMOS Level translator Tri-State TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
Questions
Is there a KiCad symbol and footprint for the PI4ULS3V204LEX?
Yes. The symbol is EasyEDA_Cloud:PI4ULS3V204LEX and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PI4ULS3V204LEX?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the PI4ULS3V204LEX datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the PI4ULS3V204LEX?
JLCPCB lists it as part C3001701, with 83 in stock; the sellers' links on this page open their listings.
What can replace the PI4ULS3V204LEX?
Parts like it in the library: the TXS0104EPW by Texas Instruments, the NXS0104PWJ by Nexperia, the TXB0104PW by Texas Instruments and the NXB0104PWJ by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the PI4ULS3V204LEX?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.