
DFLS130L
Diodes IncorporatedExtended
-40℃~+125℃ 1 Independent 1A 1mA@30V 30V 310mV@1A 50A PowerDI-123 Schottky Diodes ROHS
- Part id
- diodes/DFLS130L
- Category
- Schottky Diodes
- Package
- PowerDI-123
- Pins
- 2
- In stock
- 3,770 at JLCPCB (C110493)
- Used on
- 27 open-source boards
Overview
The DFLS130L is a schottky Diode made by Diodes Incorporated in a PowerDI-123 package with 2 pins. -40℃~+125℃ 1 Independent 1A 1mA@30V 30V 310mV@1A 50A PowerDI-123 Schottky Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_PowerDI-123, from KiCad's library), ready for a KiCad board. 3,770 are in stock at JLCPCB (part C110493). 27 open-source boards in 18 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
8- Reverse voltage, most
- 30 V · max working peak reverse voltage · p. 2
- Forward current, most
- 1 A · max average forward current at TT = +121°C · p. 2
- Junction, hottest
- 125 °C · max operating junction temperature · p. 2
- Junction to air (PowerDI123)
- 60 K/W · junction to ambient, Note 5 board mounting · p. 2
- Junction to air (PowerDI123)
- 180 K/W · junction to ambient, Note 6 board mounting · p. 2
- Forward voltage
- 210 mV · typical at IF = 0.1A, TA = +25°C · p. 2
- Forward voltage
- 310 mV · typical at IF = 1.0A, TA = +25°C · p. 2
- Forward voltage
- 328 mV · typical at IF = 1.5A, TA = +25°C · p. 2
What it is and has
4- Protection
- Guard ring die construction for transient protection · p. 1
- Package
- PowerDI® 123 · p. 1
- Compliance
- Lead-free finish; RoHS compliant · p. 1
- Environmental
- Halogen and antimony free · p. 1
Specifications
20| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Peak Repetitive Reverse Voltage VRRM | TA = +25°C | max 30 V | 2 |
| Working Peak Reverse Voltage VRWM | TA = +25°C | max 30 V | 2 |
| DC Blocking Voltage VR | TA = +25°C | max 30 V | 2 |
| RMS Reverse Voltage VR(RMS) | TA = +25°C | max 21 V | 2 |
| Average Forward Current IF(AV) | TT = +121°C; single phase, half wave, 60Hz, resistive or inductive load; for capacitive load, derate current by 20% | max 1 A | 2 |
| Non-Repetitive Peak Forward Surge Current IFSM | 8.3ms single half sine-wave superimposed on rated load; TA = +25°C | max 50 A | 2 |
| Power Dissipation (Note 5) PD | Part mounted on 2" x 2" GETEK board with 1" x 1" copper pad, 25% anode, 75% cathode; TA = +25°C | max 1.67 W | 2 |
| Power Dissipation (Note 6) PD | Part mounted on FR-4 board with recommended pad layout; TA = +25°C | max 556 mW | 2 |
| Thermal Resistance Junction to Ambient (Note 5) RθJA | Part mounted on 2" x 2" GETEK board with 1" x 1" copper pad, 25% anode, 75% cathode; TA = +25°C | max 60 °C/W | 2 |
| Thermal Resistance Junction to Ambient (Note 6) RθJA | Part mounted on FR-4 board with recommended pad layout; TA = +25°C | max 180 °C/W | 2 |
| Thermal Resistance Junction to Soldering (Note 7) RθJS | Theoretical RθJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction | max 10 °C/W | 2 |
| Operating Temperature Range TJ | min -40 · max 125 °C | 2 | |
| Storage Temperature Range TSTG | min -40 · max 150 °C | 2 | |
| Reverse Breakdown Voltage (Note 8) V(BR)R | IR = 1.0mA; TA = +25°C; short duration pulse test | min 30 V | 2 |
| Forward Voltage VF | IF = 0.1A; TA = +25°C | typ 0.21 V | 2 |
| Forward Voltage VF | IF = 1.0A; TA = +25°C | typ 0.31 V | 2 |
| Forward Voltage VF | IF = 1.5A; TA = +25°C | typ 0.328 · max 0.36 V | 2 |
| Leakage Current (Note 8) IR | VR = 5V, TA = +25°C; short duration pulse test | typ 0.26 mA | 2 |
| Leakage Current (Note 8) IR | VR = 30V, TA = +25°C; short duration pulse test | max 1 mA | 2 |
| Total Capacitance CT | VR = 10V, f = 1.0MHz; TA = +25°C | typ 76 pF | 2 |
Ordering codes, by the datasheet
1- DFLS130L-7
- PowerDI123 · 3000 pieces, Tape & Reel · p. 1
- 4 layers90.2 × 95.9 mm

- 2 layers64.8 × 41 mm

- 4 layers90.2 × 95.9 mm

- 4 layers30.5 × 82.6 mm

Circuit board design
ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society
89 parts12 - 4 layers88 × 94.5 mm

FC V5a
proveskit/flight_controller_board
The main flight computer board for the PROVES Kit.
270 parts6CERN-OHL-W-2.0 - 6 layers90 × 45 mm

Hw tele stern
shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.
303 parts3GPL-3.0 - 4 layers88 × 94.5 mm

Battery Board V3a
proveskit/battery_board
The battery and power management board for the PROVES Kit.
204 parts2CERN-OHL-W-2.0 - 4 layers90.2 × 95.9 mm

Mainboard v05
alxklso/ISP-cubesat
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.
255 parts1MIT
Parts like it
8DFLS240L
PowerDI-123-55℃~+125℃ 1 Independent 100uA@40V 2A 40V 500mV@2A 50A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS130
PowerDI-123-55℃~+125℃ 1 Independent 1A 1mA@30V 30V 35A 420mV@1A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS140
PowerDI-123-55℃~+125℃ 1 Independent 1.1A 20uA@40V 40A 40V 530mV@1.1A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS230L
PowerDI-123-40℃~+125℃ 1 Independent 1mA@30V 2A 30V 33A 420mV@2A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS230
PowerDI-123-55℃~+125℃ 1 Independent 1mA@30V 2A 30V 40A 490mV@2A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS240LQ
PowerDI-123-55℃~+125℃ 1 Independent 100uA@40V 2A 40V 50A 650mV@3A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS1150
PowerDI-123-55℃~+175℃ 1 Independent 150V 1A 2uA@150V 50A 820mV@1A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesDFLS160
PowerDI-123-65℃~+150℃ 1 Independent 100uA@60V 1A 500mV@1A 50A 60V PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
Questions
Is there a KiCad symbol and footprint for the DFLS130L?
Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_PowerDI-123, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DFLS130L?
PowerDI-123, with 2 pins. Its footprint is drawn on this page.
Where is the DFLS130L datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the DFLS130L?
JLCPCB lists it as part C110493, with 3,770 in stock; the sellers' links on this page open their listings.
What can replace the DFLS130L?
Parts like it in the library: the DFLS240L by Diodes Incorporated, the DFLS130 by Diodes Incorporated, the DFLS140 by Diodes Incorporated and the DFLS230L by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DFLS130L?
27 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.