

Picubed samwise
Avionics for 2U Rev of Sputnik Satellite
- Size
- 90.2 × 95.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 191
- Nets
- 164
- Pads
- 708
- Tracks, vias
- 1,266, 289
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Oct 2022
- Updated
- 26 May 2026
Overview
Picubed samwise is an open-source printed circuit board by stanford-ssi, from the stanford-ssi/samwise-avionics repository on GitHub. It is a 4-layer board of 90.2 × 95.9 mm with 191 parts on 164 nets, routed with 1,266 tracks and 289 vias.
It is built around the MR25H40MDF, LT3652HVIMSE#PBF and PE014006, with the TPS7A4501DCQT, IRLML2803 and 1N4151W-E3-08 among its other parts. Its parts include 69 resistors, 51 capacitors, 22 connectors, 11 ICs and 8 diodes. It belongs with the RP2350 boards of this library.
Main components
10MR25H40MDF
DFN-8-EP(5x6)4Mbit MRAM SPI DFN-8-EP(5x6) Random Access Memory (RAM) ROHSEverspin TechRandom Access Memory (RAM)LT3652HVIMSE#PBF
MSOP-12-EP-0.65mm-40℃~+125℃ 18V 2A 4.95V~34V 4~5 85uA Charging IC Lithium Battery、LiFePO4 Battery、Lead-Acid Battery Support MSOP-12-EP-0.65mm Battery Management ROHSAnalog DevicesBattery ManagementPE014006
插件,20x10mm-40℃~+85℃ 172Ω 209mW 400V@AC 5A 5A@30VDC、6A@250VAC 6V 8ms 8ms AgNi One set changeover: 1C (SPDT - changeover) 插件,20x10mm Power Relays ROHSTE ConnectivityPower RelaysTPS7A4501DCQT
SOT-223-6-40℃~+125℃@(Tj) 1 1.21V~20V 1.5A 1mA 20V 300mV@(1.5A) 35uVrms 68dB@(1kHz) Adjustable Over Current Protection、Over Temperature Protection、Reverse connection protection Positive SOT-223-6 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRLML2803
SOT-231 N-channel 1.2A 15pF 1V 250mΩ@10V 3.3nC 30V 34pF 540mW 85pF N-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs1N4151W-E3-08
SOD-123-55℃~+150℃@(Tj) 150mA 1V@50mA 4ns 50V 50nA@50V Independent SOD-123 Switching Diodes ROHSVishay IntertechnologySwitching DiodesABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystalsCDBA240LL-G
DO-214AC(SMA)1 Independent 1mA@40V 2A 360mV@2A 40V 50A DO-214AC(SMA) Schottky Diodes ROHSComchipSchottky DiodesDFLS130L
PowerDI-123-40℃~+125℃ 1 Independent 1A 1mA@30V 30V 310mV@1A 50A PowerDI-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesMMBT2222A-TP
SOT-23-55℃~+150℃ 1 NPN 100 10nA 1V 300MHz 350mW 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSMicro Commercial ComponentsBipolar (BJT)
README
README.mdSAMWISE Avionics Repository
Welcome to the SAMWISE GitHub Avionics repository! Here, we (try to) keep the most updated versions of all of our circuit boards accessible to the public. Link to the Wiki for onboarding info and general resources
General Layout
Individual boards have their own folders to ease merging of branches. Symbol libraries, footprint libraries, and 3D models are in separate top-level folders. Project templates (for starting out) and jobsets (for project export) are in other top-level folders. Unused, old boards are in the unused_boards folder.
KiCad Version: 9.0.1 ≤ V < 10.0
Exception: unused boards are version 8.X.X
List of Relevant Boards (in alphabetical order of folder name)
Note that each major revision generally indicates a new satellite or a significant overhaul of the board and each minor revision generally indicates a board order.
| Board Name | Folder Name | Current Rev | Current Rev Gerber Date | Brief Description |
|---|---|---|---|---|
| ADCS | ADCS/ADCS-v1-samwise | 01.8 | 09/21/25 | Attitude Control Determination System (ADCS) controller board |
| Reaction Wheel Motor Board | ADCS/ADCS-motors-v1-samwise | 01.1 | 05/28/25 | ADCS reaction wheel controller board |
| Battery Board | BatteryBoard | 02.3 | 04/05/25 | Contains battery, charging IC. 2x per satellite |
| Flex Deploy Side Panels | FlexDeploySidePanels | 03.3 | 04/22/25 | Deployable side panels, on SAMWISE Y sides (2 sides) |
| Groundstation 433 MHz HAT | Groundstation_433_Hat | 01.3 | 04/07/25 | Raspberry Pi HAT control board for 433 MHz groundstation |
| Groundstation 2400 MHz HAT | Groundstation_2400_Hat | 01.6 | 04/06/25 | Raspberry Pi HAT control board for 2400 MHz groundstation |
| LT8491 MPPT Module | LT8491_mezzanine | 01.1 | 04/05/25 | Maximum power point tracking (MPPT) module, adapted from Max Holliday's design |
| PiCubed | PiCubed/mainboard-v06.4_samwise | 06.4 | 09/21/25 | SAMWISE's master controller board |
| MPPT Add-on Board | PiCubed/MPPT_addon_board | 01.4 | 04/06/25 | Holds MPPT modules, attaches to PiCubed |
| RPi Interface Board | RPi_Interface | 01.3 | 04/07/25 | HAT board for Raspberry Pi+camera system and 2400 MHz radio |
| Stationary X Side Panels | Stationary_X_Panel | 01.6 | 04/26/25 | Stationary (fixed) side panels, on SAMWISE X sides (2 sides) |
| Sun Pyramid | sun_sensor_pyramid | 03.2 | 04/07/25 | Holds sun sensors that help determine sun vector for ADCS system |
| XY Magnetorquer Coils | Universal_XY_MagTorq | 02.2 | 04/26/25 | XY magnetorquer coil boards, 2 per XY side (4 sides total) in parallel and 5 coils/board in series |
| Z Magnetorquer Coils | Universal_Z_MagTorq | 01.1 | 04/07/25 | Z magnetorquer coil boards, 2 per Z side (2 sides total) in parallel and 5 coils/board in series |
| Z Side Panel | ZPlus_Panel | 02.4 | 04/22/25 | Z side panels, with antenna + camera on Z+ side. For both Z+ and Z- after thruster removed from Z- |
Guidelines
- Set up KiCad and GitHub according to the guides in the Wiki.
- ALWAYS check via
git statusand pull viagit pullBEFORE making edits. If going into someone else's branch or main, usegit restore <file>to restore changes before returning to your branch and do NOT commit/push changes without the branch owner's explicit permission. - Create your own branch when making edits. Make pull requests when you have finalized your changes. Do NOT push to main unless you are an AV or team co-lead.
- To prepare your board for ordering, follow the Board Review and Ordering Procedures linked on the Notion page. This saves AV/team leads a substantial amount of time, and keeps things consistent/easy to review.
- Do not edit this README unless you are an AV or team co-lead.
Parts
191| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R21, R22, R25, R28, R29, R31, R34, R35, R44, R45, R51, R53, R54, R55, R57 +7 |
| 16 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C13, C14, C16, C21, C24, C28, C40, C45, C46, C47, C48, C49, C50 |
| 13 | 100k | Resistor_SMD:R_0603_1608Metric | R11, R12, R15, R27, R38, R46, R60, R61, R62, R68, R69, R70, R75 |
| 11 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C25, C30, C35, C39, C41, C42, C43, C44, C51, C54 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6, R20, R23, R26, R56, R63 |
| 6 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C15, C29, C34 |
| 6 | Fiducial_1mm_Mask2mm | Fiducial:Fiducial_1mm_Mask2mm | REF1B, REF1T, REF2B, REF2T, REF3B, REF3T |
| 5 | 22uF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C31, C37, C38 |
| 4 | 1985807 | ssi_connector:1985807 | J8, J9, J16, J18 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C23, C27, C33 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_1210_3225Metric | C19, C20, C22 |
| 3 | 3.3k | Resistor_SMD:R_0603_1608Metric | R33, R58, R59 |
| 3 | CMSH1-40M | ssi_diode:DIOM5226X262N | D3, D7, D8 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R50, R82 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R66, R67 |
| 2 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C26, C32 |
| 2 | 330k | Resistor_SMD:R_0603_1608Metric | R1, R18 |
| 2 | 35362-0450 | ssi_connector:Molex_35362-0450 | J10, J17 |
| 2 | 35362-0550 | ssi_connector:Molex_35362-0550 | J12, J15 |
| 2 | 35362-0750 | ssi_connector:Molex_35362-0750 | J20, J21 |
| 2 | 35362-0850 | ssi_connector:Molex_35362-0850 | J3, J4 |
| 2 | 3k | Resistor_SMD:R_0603_1608Metric | R79, R80 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R39, R40 |
| 2 | DMP2040USS-13 | ssi_transistor:DMP2040USS-13 | Q10, Q21 |
| 2 | IRLML2803 | ssi_transistor:SOT-23 | Q5, Q9 |
| 2 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2, JP3 |
| 2 | KMR231NG LFS | ssi_switch:BTN_KMR2_4.6X2.8 | SW1, SW2 |
| 1 | 0.02 | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 0.27 | Resistor_SMD:R_2512_6332Metric | R19 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 121k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1655 | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | 1N4151W-E3-08 | Diode_SMD:D_SOD-123 | D6 |
| 1 | 1uH | ssi_inductor:L_2510 | L4 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C53 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 3.3V EN | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | 3.3uH | ssi_inductor:polarized | L1 |
| 1 | 3.3uH | ssi_inductor:L_2141 | L2 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R65 |
| 1 | 35362-0650 | ssi_connector:Molex_35362-0650 | J19 |
| 1 | 35362-0950 | ssi_connector:Molex_35362-0950 | J6 |
| 1 | 35362-1250 | ssi_connector:Molex_35362-1250 | J5 |
| 1 | 4.7M | Resistor_SMD:R_0603_1608Metric | R64 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C36 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 503182-1852 | ssi_connector:Molex_503182-1852 | J1 |
| 1 | 510k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 560 | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 68uH | ssi_inductor:SDE06004A-680K | L3 |
| 1 | 73.2k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Amphenol_901-144 | ssi_connector:SMA_Amphenol_901-144_horizontal | J7 |
| 1 | BQ25883RGER | ssi_IC:QFN50P400X400X100-25N-D | U17 |
| 1 | CDBA240LL | ssi_diode:DO-214AC | D2 |
| 1 | Conn_01x08_Horizontal | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J14 |
| 1 | Conn_ARM_JTAG_SWD_10 | ssi_connector:SAMTEC_FTSH-105-01-L-DV-007 | J2 |
| 1 | DFLS130L | ssi_diode:PWRDI-123 | D4 |
| 1 | GREEN LED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP6 |
| 1 | LT3652HVIMSE#PBF | ssi_IC:MSOP-12_MSE | U6 |
| 1 | MMBT2222A-TP | ssi_transistor:SOT-23 | Q6 |
| 1 | MPPT board | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Vertical | J11 |
| 1 | MR25H40MDF | ssi_IC:SON127P600X500X90-9N | U3 |
| 1 | PE014006 | ssi_relay:Relay_PE014006 | U16 |
| 1 | QWIIC | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J22 |
| 1 | QWIIC supply | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | RFM98PW | ssi_IC:RFM98PW | U23 |
| 1 | RM_10 | ssi_IC:ADM1176-1ARMZ-R7 | U4 |
| 1 | RP2350_80QFN | ssi_IC:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U2 |
| 1 | TLV1704 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | TPS54226PWPR | ssi_IC:PWP14_2P31X2P46-L | U5 |
| 1 | TPS70960DBVR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | TPS7A4501DCQT | ssi_IC:TPS7A4501DCQT | U21 |
| 1 | USB_C_pycubed | ssi_connector:USB_C_Receptacle_XKB_U262-161N-4BVC11 | J13 |
| 1 | logo_SSI_medium | ssi_drawings:logo_SSI_medium | G*** |
The 190 most common of 191 parts.
More from stanford-ssi/samwise-avionics
12- 4 layers90.2 × 95.9 mm

- 6 layers37.3 × 46 mm

- 4 layers406 × 215.5 mm

FlexDeploySidePanels
stanford-ssi/samwise-avionics
Avionics for 2U Rev of Sputnik Satellite
131 parts13 - 2 layers90.2 × 95.9 mm

- 4 layers56 × 65 mm

- 2 layers81.5 × 215.5 mm

- 4 layers95.9 × 90.2 mm

- 4 layers97 × 97 mm

- 2 layers35 × 35 mm

- 2 layers46.8 × 46.8 mm

- 4 layers30 × 65 mm

- 4 layers78.9 × 61.4 mm

Similar boards
- 4 layers90.2 × 95.9 mm

Mainboard v06b samwise
pete4radio/SAMWISE-1-1-HW-Training
PCBs fabbed in May 2024 for SAMWISE
204 parts - 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

Mainboard v05
alxklso/ISP-cubesat
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.
255 parts1MIT - 4 layers90.2 × 95.9 mm

ADCS board
onionharvester/boardwalk
A little gathering place for my PCBs. This is their favourite hangout spot! 🪼⋆.ೃ࿔*:・
205 parts55 - 4 layers90.2 × 95.9 mm

ADCS board
pete4radio/SAMWISE-1-2-HW-Training
SAMWISE boards existing or newly ordered March 2025
197 parts - 4 layers90.2 × 95.9 mm

- 4 layers88 × 94.5 mm

Battery board v1
proveskit/battery_board
The battery and power management board for the PROVES Kit.
119 parts2CERN-OHL-W-2.0 - 6 layers90.2 × 95.9 mm

PiCoral
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
102 parts2
Questions
How big is the Picubed samwise PCB?
It measures 90.2 × 95.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Picubed samwise use?
191 parts, built around the MR25H40MDF, LT3652HVIMSE#PBF, PE014006 and TPS7A4501DCQT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picubed samwise KiCad files?
From the stanford-ssi/samwise-avionics repository on GitHub, at the commit this page was made from: the board is PiCubed/picubed_samwise/picubed_samwise.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picubed samwise design in my own project?
Its repository states no licence, so its author keeps all rights: ask stanford-ssi before reusing the design.