Skip to the content
12

DFLS240L

Diodes IncorporatedExtended

-55℃~+125℃ 1 Independent 100uA@40V 2A 40V 500mV@2A 50A PowerDI-123 Schottky Diodes ROHS

Part id
diodes/DFLS240L
Category
Schottky Diodes
Package
PowerDI-123
Pins
2
In stock
11,721 at JLCPCB (C74179)
Used on
4 open-source boards

Overview

The DFLS240L is a schottky Diode made by Diodes Incorporated in a PowerDI-123 package with 2 pins. -55℃~+125℃ 1 Independent 100uA@40V 2A 40V 500mV@2A 50A PowerDI-123 Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_PowerDI-123, from KiCad's library), ready for a KiCad board. 11,721 are in stock at JLCPCB (part C74179). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_PowerDI-123From KiCad's library

From the datasheet

8
Reverse voltage, most
40 V · working peak reverse voltage, max · p. 2
Forward current, most
2 A · average forward current, max; half-wave, 60 Hz; capacitive loads derate 20% · p. 2
Junction, hottest
125 °C · operating junction temperature, max; see Figure 4 derating · p. 2
Forward voltage
400 mV · at IF = 1.0 A, TA = 25°C, typical · p. 2
Forward voltage
450 mV · at IF = 2.0 A, TA = 25°C, typical · p. 2
Forward voltage
500 mV · at IF = 3.0 A, TA = 25°C, typical · p. 2
Junction to air (PowerDI123)
60 K/W · junction to ambient, typical; GETEK board and copper pad per Note 5 · p. 2
Junction to air (PowerDI123)
180 K/W · junction to ambient, typical; FR-4 board and copper pads per Note 6 · p. 2

Pinout

2
The pins of the DFLS240L
PinNameType
1KPassive
2APassive

Open-source boards using it

4
  • 8 layers65.1 × 37.8 mmArmory, the printed circuit board in 3D

    Armory

    eiselekd/hw

    hw

    202 parts2
  • 6 layers102 × 41.1 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    C-yue28/Flight_Controller

    6-layer custom flight controller PCB, incorporating a battery management system (BMS), 6-axis IMU, dedicated BLDC/servo control/power lines, and camera lines. Uses the ESP32-WROOM-1 as the central microcontroller.

    139 parts
  • 2 layers101 × 82 mmPower board v4 4, the printed circuit board in 3D

    Power board v4 4

    maurer-lbb/inkube_hardware

    Open-source hardware (CAD + PCB) for inkudock, a modular incubator and closed-loop electrophysiology, and a water compartment lid preventing evaporation from cell cultures.

    117 parts
  • 4 layers51.1 × 56.5 mmSystem PSU v2, the printed circuit board in 3D

    System PSU v2

    tonigotev/SensaLimb

    Smart arm prothesis

    71 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DFLS240L?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_PowerDI-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DFLS240L?

PowerDI-123, with 2 pins. Its footprint is drawn on this page.

Where is the DFLS240L datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the DFLS240L?

JLCPCB lists it as part C74179, with 11,721 in stock; the sellers' links on this page open their listings.

What can replace the DFLS240L?

Parts like it in the library: the DFLS240LQ by Diodes Incorporated, the DFLS260 by Diodes Incorporated, the DFLS240L by FUXINSEMI and the DFLS2100 by FUXINSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DFLS240L?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.