Skip to the content
123

AP7384-33Y

Diodes IncorporatedExtended

-40℃~+125℃@(Tj) 1 2.5uA 3.3V 40V 500mV@(50mA) 50mA 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
diodes/AP7384-33Y
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-89
Pins
3
In stock
0 at JLCPCB (C3751680)
Used on
7 open-source boards

Overview

The AP7384-33Y is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Diodes Incorporated in a SOT-89 package with 3 pins. -40℃~+125℃@(Tj) 1 2.5uA 3.3V 40V 500mV@(50mA) 50mA 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:AP7384-33Y, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3751680). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1VO2GND3VI
Regulator_Linear:AP7384-33YFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-89-3From KiCad's library

Pinout

3
The pins of the AP7384-33Y
PinNameType
1VOPower out
2GNDPower in
3VIPower in

Open-source boards using it

7
  • 2 layers21.5 × 19 mmUSBPD, the printed circuit board in 3D

    USBPD

    Mr-Bossman/usbPB-ThinkPad

    A usb PD converter for lenovo slim tip chargers

    23 parts3
  • 6 layers100 × 45 mmEsphome rgbcct led controller, the printed circuit board in 3D

    Esphome rgbcct led controller

    mikelawrence/esphome-rgbcct-led-controller

    ESPHome RGBCCT LED Controller is a PCB design that support a 5-Channel LED arrangement with Red, Green, Blue, Warm White and Cool White LEDs.

    83 parts1CERN-OHL-P-2.0
  • 2 layers23.1 × 34.3 mmRf switch, the printed circuit board in 3D

    Rf switch

    Naegolus/streaming

    Twitch brainstorming repository

    21 parts1GPL-3.0
  • 4 layers82.5 × 87.9 mmAlm, the printed circuit board in 3D

    Alm

    mohammadsdtmnd/How-to-not-fail-RF-PCB-prototype

    I've made GPS amplifier for hobby time, it failed. I've learned what I should not have done again to prevent failure. My motivation for doing this was to see the GPS signal spectrum. :)

    85 parts
  • 2 layers58.7 × 110.9 mmSCMv3, the printed circuit board in 3D

    SCMv3

    4ms/pcb-SCMv3

    SCM and SCMBO in one module

    127 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP7384-33Y?

Yes. The symbol is Regulator_Linear:AP7384-33Y and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP7384-33Y?

SOT-89, with 3 pins. Its footprint is drawn on this page.

Where is the AP7384-33Y datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP7384-33Y?

JLCPCB lists it as part C3751680, with 0 in stock; the sellers' links on this page open their listings.

What can replace the AP7384-33Y?

Parts like it in the library: the AMS1117-3.3S by UMW, the L78L33ACU by STMicroelectronics, the HT7533-1 by UMW and the AMS1117-3.3 by GOODWORK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP7384-33Y?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.