Skip to the content
123456

AP5100WG

Diodes IncorporatedExtended

-25℃~+85℃ 1 1.2A 1.4MHz 4.75V~24V 400uA 810mV~15V Adjustable Buck Buck Built-in SOT-26 DC-DC Converters ROHS

Part id
diodes/AP5100WG
Category
DC DC Converters
Package
SOT-26
Pins
6
In stock
19,905 at JLCPCB (C114647)
Used on
2 open-source boards

Overview

The AP5100WG is a DC DC Converter made by Diodes Incorporated in a SOT-26 package with 6 pins. -25℃~+85℃ 1 1.2A 1.4MHz 4.75V~24V 400uA 810mV~15V Adjustable Buck Buck Built-in SOT-26 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Celestial_Power_Switchmode:Diodes AP5100, from Altium's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 19,905 are in stock at JLCPCB (part C114647). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1BST2GND3FB4EN5IN6SW
Celestial_Power_Switchmode:Diodes AP5100From Altium's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

14
Supply, least
4.75 V · IN, recommended operating, min · p. 3
Supply, most
24 V · IN, recommended operating, max · p. 3
Supply, absolute maximum
26 V · VIN, absolute maximum · p. 4
Works from
-25 °C · operating ambient, min · p. 4
Works up to
85 °C · operating ambient, max · p. 4
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 4
Takes working
400 µA · quiescent, VEN = 2 V, VFB = 1 V, typical · p. 5
Takes asleep
100 nA · shutdown, VEN = 0 V, typical · p. 5
Gives
1.2 A · continuous load current, max · p. 1
Current limit
2.4 A · switch current limit, typical · p. 5
Feedback reference
810 mV · feedback voltage, 4.75 V ≤ VIN ≤ 24 V, typical · p. 5
Switches at
1.4 MHz · oscillator frequency, VFB = 0.6 V, typical · p. 5
Junction to air (SOT26)
140 K/W · junction to ambient, approximately 1-inch square of 1 oz copper · p. 4
Junction to case (SOT26)
35 K/W · junction to case, approximately 1-inch square of 1 oz copper · p. 4

Open-source boards using it

2
  • 2 layers10 × 13.9 mmStep down, the printed circuit board in 3D

    Step down

    aNThiCu/step-down-module

    A configurable step down module built to be placed on a pcb.

    15 partsGPL-3.0
  • 2 layers74 × 69 mmIlluminati rgb, the printed circuit board in 3D

    Illuminati rgb

    taseraul/illuminati-rgb

    ESP32 based RGB Controller

    56 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP5100WG?

Yes. The symbol is Celestial_Power_Switchmode:Diodes AP5100 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP5100WG?

SOT-26, with 6 pins. Its footprint is drawn on this page.

Where is the AP5100WG datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP5100WG?

JLCPCB lists it as part C114647, with 19,905 in stock; the sellers' links on this page open their listings.

What can replace the AP5100WG?

Parts like it in the library: the TPS562201DDC by Texas Instruments, the SX1308 by SX, the ETA8120S2G by etasolution and the LN2220PAR by NATLINEAR. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP5100WG?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.