Skip to the content
PCBKitNew board
BT136, in 3D

BT136

Jiangsu Changjing Electronics Technology (CJ)

-40℃~+125℃ 1 TRIAC 1.45V 1.7V 10mA 20mA 25A 500mW 600V 6A TO-220-3L Thyristors (SCR)/Modules ROHS

Extended
DatasheetJLCPCBLCSCcj/BT136
Category
Thyristors (SCR), Modules
Package
TO-220-3L
Pins
3

Overview

The BT136 is a thyristors (SCR), Module made by Jiangsu Changjing Electronics Technology (CJ) in a TO-220-3L package with 3 pins. -40℃~+125℃ 1 TRIAC 1.45V 1.7V 10mA 20mA 25A 500mW 600V 6A TO-220-3L Thyristors (SCR)/Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BT136S, from EasyEDA) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. 177 are in stock at JLCPCB (part C98796). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

M22M11G3
EasyEDA_Cloud:BT136SFrom EasyEDA

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Parameters

10
Average Gate Power Dissipation (PG(AV))
500mW
Current - Gate Trigger(Igt)
10mA
Current - On State(It(RMS))
6A
Current - Surge(Itsm@f)
25A
Gate Trigger Voltage (Vgt)
1.45V
Holding Current (Ih)
20mA
Operating Temperature
-40℃~+125℃
Peak off - state voltage(Vdrm)
600V
SCR Type
1 TRIAC
Voltage - On State(Vtm)
1.7V

Order codes

1

Pinout

3
The pins of the BT136
PinNameType
1M1Unspecified
2M2Unspecified
3GUnspecified

Open-source boards using it

All 8
  • 2 layers127.6 × 76.4 mm4ch relay-1fan pcb, the printed circuit board in 3D

    4ch relay-1fan pcb

    ashloverscn/4ch-relay-1fan-pcb

    4ch-relay-1fan-pcb

    57 parts1
  • 2 layers107.9 × 62.8 mm4ch spdt relay-1fan pcb, the printed circuit board in 3D

    4ch spdt relay-1fan pcb

    ashloverscn/4ch-spdt-relay-1fan-pcb

    4ch-spdt-relay-1fan-pcb

    49 parts1
  • 2 layers58.3 × 29.5 mmDimmer pcb, the printed circuit board in 3D

    Dimmer pcb

    ashloverscn/dimmer-pcb

    dimmer-pcb

    13 parts1
  • 2 layers48.3 × 83.8 mmSmartswitch, the printed circuit board in 3D

    Smartswitch

    mlauke/smartswitch

    sonnen battery controller based on ESP8266/ESP32 to drive a 3.3kW heater (Heißwasserspeicher-Einbauheizung) and integrates with the local hot water system.

    35 parts1MIT
  • 2 layers190 × 109 mmIOB v3.2.1, the printed circuit board in 3D

    IOB v3.2.1

    ADFTech/xtec-uc-ip-main-pcb

    KiCad hardware repo for the UC-IP main PCB (currently: IOB board family). This README documents the review-and-release process used to get a schematic/PCB change from an engineer's desk to fabrication.

    538 parts
  • 2 layers65 × 65.1 mmBase heating, the printed circuit board in 3D

    Base heating

    NerdyProjects/HouseBusNode

    (Yet another) house bus hardware based on STM32F072 and the CAN bus

    90 parts8

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/cj/BT136" title="BT136 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/cj/BT136.jpg" alt="BT136" width="1200" height="900">
A picture that opens the part, for a README
[![BT136](https://pcbkit.io/embed/parts/cj/BT136.jpg?size=s)](https://pcbkit.io/parts/cj/BT136)

Questions

Is there a KiCad symbol and footprint for the BT136?

Yes. The symbol is EasyEDA_Cloud:BT136S and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BT136?

TO-220-3L, with 3 pins. Its footprint is drawn on this page.

Where is the BT136 datasheet?

Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.

Where can I order the BT136?

JLCPCB lists it as part C98796, with 177 in stock; the sellers' links on this page open their listings.

What can replace the BT136?

Parts like it in the library: the BTA16-800B by Slkor, the TYN625RG-JSM by JSMSEMI, the BTA16-800BW by WEIDA and the BTA16-600B by KTP. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BT136?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8