2 layers194 × 114.1 mm
Overview
The ABS10 is a bridge Rectifier made by BORN in a ABS package with 4 pins. -55℃~+150℃ 10uA@1000V 1A 1V@400mA 1kV 30A Single-Phase Rectifier ABS Bridge Rectifiers ROHS.
PCBKit's library has its KiCad symbol (Diode_Bridge:ABS10, from KiCad's library) and its footprint (Diode_SMD:Diode_Bridge_Diotec_ABS, from KiCad's library), ready for a KiCad board. 4,604 are in stock at JLCPCB (part C19078060). 10 open-source boards in 8 repositories on GitHub use it.
Symbol
Footprint
Parameters
7- Current - Rectified
- 1A
- Non-Repetitive Peak Forward Surge Current
- 30A
- Operating Junction Temperature Range
- -55℃~+150℃
- Reverse Leakage Current (Ir)
- 10uA@1000V
- Type
- Single-Phase Rectifier
- Voltage - DC Reverse(Vr)
- 1kV
- Voltage - Forward(Vf@If)
- 1V@400mA
Order codes
1- ABS10LCSC C19078060
Pinout
4| Pin | Name | Type |
|---|---|---|
| 1 | + | Passive |
| 2 | - | Passive |
| 3 | — | Passive |
| 4 | — | Passive |
Open-source boards using it
All 10- 2 layers123 × 91.6 mm
Matt poe prototype
mhardeman/matt-poe-prototype
PoE Powered Device (PD) Prototype Schematic & PCB design in KiCad for 12V & 5V output rails
56 parts5 - 4 layers88.9 × 79.4 mm
Link
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
170 parts3 - 2 layers55 × 48.1 mm
220 to 5v charger 3
skndungu/220-110VAC-to-5V-3A-Adapter
This repo contains a PCB design for a 220/110VAC to 5V 3A adapter for your 5V appliances and mobile phone for fast charging and powering
20 parts1 - 4 layers60 × 40 mm
- 2 layers92.5 × 30 mm
- 4 layers107.9 × 88.9 mm
Motherboard
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
70 parts3 - 2 layers55 × 48.1 mm
220 to 5v charger
skndungu/220-110VAC-to-5V-3A-Adapter
This repo contains a PCB design for a 220/110VAC to 5V 3A adapter for your 5V appliances and mobile phone for fast charging and powering
20 parts1
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/born/ABS10" title="ABS10 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/born/ABS10.jpg" alt="ABS10" width="1200" height="900">[](https://pcbkit.io/parts/born/ABS10)Questions
Is there a KiCad symbol and footprint for the ABS10?
Yes. The symbol is Diode_Bridge:ABS10 and the footprint Diode_SMD:Diode_Bridge_Diotec_ABS, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ABS10?
ABS, with 4 pins. Its footprint is drawn on this page.
Where is the ABS10 datasheet?
BORN publishes it: the Datasheet link on this page opens it.
Where can I order the ABS10?
JLCPCB lists it as part C19078060, with 4,604 in stock; the sellers' links on this page open their listings.
What can replace the ABS10?
Parts like it in the library: the ABS10 by MDD, the ABS10 by GOODWORK, the ABS10 by baocheng and the ABS10 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ABS10?
10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
ABS10
ABS-55℃~+150℃ 1.1V@1A 1A 1kV 35A 5uA@1kV ABS Bridge Rectifiers ROHSMDDBridge RectifiersABS10
ABS-55℃~+150℃ 1A 1V@400mA 1kV 3A 5uA@1kV ABS Bridge Rectifiers ROHSGOODWORKBridge RectifiersABS10
ABS-55℃~+150℃ 1.1V@1A 10uA 1A 1kV 30A Single-Phase Rectifier ABS Bridge Rectifiers ROHSbaochengBridge RectifiersABS10
ABSBridge RectifiershongjiachengABS10
ABS-55℃~+150℃ 1A 1kV 35A 5uA@1kV 950mV@500mA Single-Phase Rectifier ABS Bridge Rectifiers ROHSYangzhou Yangjie Electronic TechnologyBridge RectifiersABS10
ABS-55℃~+150℃ 1.1V@1A 1A 1kV 35A 5uA@1000V Single-Phase Rectifier ABS Bridge Rectifiers ROHSGuangdong HottechBridge RectifiersABS10
ABS-55℃~+150℃ 1A 1V@0.5A 1kV 5uA 70A Single-Phase Rectifier ABS Bridge Rectifiers ROHSTOSBridge RectifiersABS10
ABS-55℃~+150℃ 1.1V@1A 1A 1kV 35A 5uA@1kV Single-Phase Rectifier ABS Bridge Rectifiers ROHSYONGYUTAIBridge Rectifiers