Skip to the content
112345678910111213141516

RA-01SH

Ai-ThinkerExtended

Part id
ai-thinker/RA-01SH
Category
LoRa Modules
Package
SMD-16P
Pins
16
In stock
2,560 at JLCPCB (C2764087)
Used on
10 open-source boards

Overview

The RA-01SH is a loRa Module made by Ai-Thinker in a SMD-16P package with 16 pins.

PCBKit's library has its KiCad symbol (OLIMEX_Cases:Ra-01SH, from Olimex) and its footprint (OLIMEX_Cases-FP:Ra-01SH, from Olimex), ready for a KiCad board. 2,560 are in stock at JLCPCB (part C2764087). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

1ANT10BUSY11RXEN12SCK13MISO14MOSI15NSS16GND2GND33V34RESET5TXEN6DIO17DIO28DIO39GND
OLIMEX_Cases:Ra-01SHFrom Olimex

Footprint

112345678910111213141516
OLIMEX_Cases-FP:Ra-01SHFrom Olimex

From the datasheet

4
Supply, least
2.7 V · VDD, recommended operating min · p. 7
Supply, most
3.6 V · VDD, recommended operating max · p. 7
Works from
-40 °C · Operating temperature min · p. 7
Works up to
85 °C · Operating temperature max · p. 7

Around it

1
res 10-100 欧姆
between GPIO and External GPIO circuit; Recommended series resistor when using an exposed GPIO. · p. 13

Specifications

7
ParameterConditionsAs printedPage
工作温度 TOPRmin -40 · typ 25 · max 85 ℃7
供电电压 VDDmin 2.7 · typ 3.3 · max 3.6 V7
IO 电平 VIOmin 2.7 · typ 3.3 · max 3.6 V7
输入逻辑电平低 VILmax 0.2 V7
输入逻辑电平高 VIHmin 0.8 V7
输出逻辑电平低 VOLmax 0.1 V7
输出逻辑电平高 VOHmin 0.9 V7

Open-source boards using it

10See all 10
  • 4 layers107.9 × 40 mmWhylight, the printed circuit board in 3D

    Whylight

    Nicolai-Electronics/poe-ledstrip-controller-hardware

    A PoE+ powered addressable LED strip driver using an ESP32-C6.

    113 parts4CERN-OHL-P-2.0
  • 2 layers45 × 100 mmWalkiepcb, the printed circuit board in 3D

    Walkiepcb

    houseofthe051010/ESP32-Walkie-Talkie-V2

    This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.

    93 parts1
  • 4 layers62 × 45.9 mmDcs, the printed circuit board in 3D

    Dcs

    MixedSignalDevelopment/K2601-Doomsday-Comms-System

    Editable source design for the Doomsday Comms System (D.C.S., SKU OS2601), board rev B.

    50 parts1MIT
  • 2 layers99.6 × 72 mmTime terminal, the printed circuit board in 3D

    Time terminal

    ontarioskaut/in_time

    Hardware z InTime 2025 etapy

    60 parts1
  • 4 layers50 × 36 mmMinicontrol, the printed circuit board in 3D

    Minicontrol

    Jotrorox/minicontrol

    RP2354A + 868 MHz LoRa (Ai-Thinker Ra-01SH) USB-C controller board, designed in KiCad 10.

    66 partsBSD-2-Clause
  • 2 layers35.6 × 64 mmMeshtastic node, the printed circuit board in 3D

    Meshtastic node

    Paulshapwala/kicad-pcb-1

    simple pcb design for a voltage regulator circuit

    19 parts
  • 2 layers81 × 62 mmLoRaESP32, the printed circuit board in 3D

    LoRaESP32

    Sosenteam/LoRa-ESP32-Pager

    This is a ESP-32 and SX1262 based pager, It contains full battery charging and management as well as an input keypad and encoder. It uses a 0.96" Oled (SSD1306).

    61 parts
  • 4 layers80 × 30 mmVoisin, the printed circuit board in 3D

    Voisin

    ciborg971/KISSE-1

    A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric

    44 parts1MIT

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the RA-01SH?

Yes. The symbol is OLIMEX_Cases:Ra-01SH and the footprint OLIMEX_Cases-FP:Ra-01SH, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RA-01SH?

SMD-16P, with 16 pins. Its footprint is drawn on this page.

Where is the RA-01SH datasheet?

Ai-Thinker publishes it: the Datasheet link on this page opens it.

Where can I order the RA-01SH?

JLCPCB lists it as part C2764087, with 2,560 in stock; the sellers' links on this page open their listings.

What can replace the RA-01SH?

Parts like it in the library: the RA-01SH-P by Ai-Thinker. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RA-01SH?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.