Skip to the content
12345678

OP1177AR

Analog DevicesExtended

-40℃~+125℃ 0.7V/us 1 1.3MHz 10mA 120dB 1nA 2nA 400uA 60uV 700nV/℃ 8nV/√Hz@1kHz Built-in compensation、Overvoltage Protection、Reverse-phase input protection SOIC-8 Precision Op Amps ROHS

Part id
adi/OP1177AR
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C4369388)
Used on
6 open-source boards

Overview

The OP1177AR is an operational Amplifier made by Analog Devices in a SOIC-8 package with 8 pins. -40℃~+125℃ 0.7V/us 1 1.3MHz 10mA 120dB 1nA 2nA 400uA 60uV 700nV/℃ 8nV/√Hz@1kHz Built-in compensation、Overvoltage Protection、Reverse-phase input protection SOIC-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OP1177AR, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C4369388). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

2-3+4V-67V+
Amplifier_Operational:OP1177ARFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OP1177AR
PinNameType
1NCNot connected
2-Input
3+Input
4V-Power in
5NCNot connected
6—Output
7V+Power in
8NCNot connected

Open-source boards using it

6
  • 4 layers100 × 60 mmSimple just sensor, the printed circuit board in 3D

    Simple just sensor

    williamlin108/USAYPT2026_FlashSensor_MLWGS

    10kHz cutoff bandwidth; TO-5 Package Si-photodiode with TIA amplifier (G:2k)

    78 parts1
  • 2 layers101.6 × 101.6 mmUtcs isource, the printed circuit board in 3D

    Utcs isource

    akshmakov/utcs-isource

    micro-transcranial current stimulation system - constant current source module

    40 parts
  • 4 layers149.9 × 99.1 mmTDCS driver old, the printed circuit board in 3D

    TDCS driver old

    Fijee-Project/utCS

    Micro transcranial current stimulation

    99 parts
  • 2 layers70 × 70 mmPCB design group7, the printed circuit board in 3D

    PCB design group7

    theo64oliver/smart-scale

    Ce projet a ete effectue en groupe de 4 sur une duree de 2 semaines, compose de Antoine JOUY, Alexis VASSEUR, Benjamin BOYER et Theo OLIVER.

    26 parts
  • 2 layers36.6 × 21.6 mmInst amp, the printed circuit board in 3D

    Inst amp

    JasMoH/Photoacoustic

    Photoacoustic spectroscopy

    53 parts5GPL-3.0
  • 4 layers63.5 × 63.5 mm.kicad_pcb, the printed circuit board in 3D

    .kicad_pcb

    Fijee-Project/utCS

    Micro transcranial current stimulation

    84 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OP1177AR?

Yes. The symbol is Amplifier_Operational:OP1177AR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OP1177AR?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OP1177AR datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the OP1177AR?

JLCPCB lists it as part C4369388, with 0 in stock; the sellers' links on this page open their listings.

What can replace the OP1177AR?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OP1177AR?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.