
RedPitaya Lockbox
TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board
Analog Devices
-20V, 500mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator
The LT3094EMSE is an uncategorised made by Analog Devices in a MSOP12 package with 13 pins. -20V, 500mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator.
PCBKit's library has its KiCad symbol (Regulator_Linear:LT3094xMSE, from KiCad's library) and its footprint (Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | IN | Power in |
| 2 | IN | Passive |
| 3 | EN/UV | Input |
| 4 | PG | Open collector |
| 5 | PGFB | Input |
| 6 | ILIM | Passive |
| 7 | VIOC | Passive |
| 8 | SET | Passive |
| 9 | GND | Power in |
| 10 | OUTS | Input |
| 11 | OUT | Power out |
| 12 | OUT | Passive |
| 13 | IN | Passive |

TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

tony-corsten/regulated-SEPIC-converter
A regulated SEPIC converter based on the dual-rail switching supply, the ADP5071, with optional high PSRR low-noise LDOs (LT3094 and LT3042) on the output.
Yes. The symbol is Regulator_Linear:LT3094xMSE and the footprint Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
MSOP12, with 13 pins. Its footprint is drawn on this page.
Parts like it in the library: the LT3094EMSE#PBF by Analog Devices, the LT3093EMSE#PBF by Analog Devices, the LT3045EMSE by Analog Devices and the LT3093EMSE by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.