Skip to the content
PCBKitNew board
LT3045EMSE on a board, in 3D

LT3045EMSE

Analog Devices

20V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator

adi/LT3045EMSE
Category
Uncategorised
Package
MSOP12
Pins
13

Overview

The LT3045EMSE is an uncategorised made by Analog Devices in a MSOP12 package with 13 pins. 20V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator.

PCBKit's library has its KiCad symbol (Regulator_Linear:LT3045xMSE, from KiCad's library) and its footprint (Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm, from KiCad's library), ready for a KiCad board. 3 open-source boards in 3 repositories on GitHub use it.

Symbol

IN1EN/UV4PG5ILIM6PGFB7SET8GND9OUTS10OUT11
Regulator_Linear:LT3045xMSEFrom KiCad's library

Footprint

12345678910111213
Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mmFrom KiCad's library

Pinout

13
The pins of the LT3045EMSE
PinNameType
1INPower in
2INPassive
3INPassive
4EN/UVInput
5PGOpen collector
6ILIMPassive
7PGFBInput
8SETPassive
9GNDPower in
10OUTSInput
11OUTPower out
12OUTPassive
13GNDPassive

Open-source boards using it

All 3
  • 2 layers160 × 100 mmRedPitaya Lockbox, the printed circuit board in 3D

    RedPitaya Lockbox

    TU-Darmstadt-APQ/RedPitaya-Lockbox

    Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

    110 parts40
  • 4 layers130 × 146 mmBoard a routed pass1 fixed, the printed circuit board in 3D

    Board a routed pass1 fixed

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    194 parts3

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/adi/LT3045EMSE" title="LT3045EMSE in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/adi/LT3045EMSE.jpg" alt="LT3045EMSE" width="1200" height="900">
A picture that opens the part, for a README
[![LT3045EMSE](https://pcbkit.io/embed/parts/adi/LT3045EMSE.jpg?size=s)](https://pcbkit.io/parts/adi/LT3045EMSE)

Questions

Is there a KiCad symbol and footprint for the LT3045EMSE?

Yes. The symbol is Regulator_Linear:LT3045xMSE and the footprint Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LT3045EMSE?

MSOP12, with 13 pins. Its footprint is drawn on this page.

What can replace the LT3045EMSE?

Parts like it in the library: the LT3094EMSE#PBF by Analog Devices, the LT3093EMSE#PBF by Analog Devices, the LT3093EMSE by Analog Devices and the LT3094EMSE by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LT3045EMSE?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

5