LT3093EMSE
Analog Devices
-20V, 200mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator
- Part id
- adi/LT3093EMSE
- Category
- Uncategorised
- Package
- MSOP12
- Pins
- 13
Overview
The LT3093EMSE is an uncategorised made by Analog Devices in a MSOP12 package with 13 pins. -20V, 200mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator.
PCBKit's library has its KiCad symbol (Regulator_Linear:LT3093xMSE, from KiCad's library) and its footprint (Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
13| Pin | Name | Type |
|---|---|---|
| 1 | IN | Power in |
| 2 | IN | Passive |
| 3 | EN/UV | Input |
| 4 | PG | Open collector |
| 5 | PGFB | Input |
| 6 | ILIM | Passive |
| 7 | VIOC | Passive |
| 8 | SET | Passive |
| 9 | GND | Power in |
| 10 | OUTS | Input |
| 11 | OUT | Power out |
| 12 | OUT | Passive |
| 13 | IN | Passive |
Parts like it
5LT3094EMSE#PBF
MSOP-12-EP-40℃~+125℃@(Tj) 0.8uVrms 0V~19.5V 1 2.35mA 20V 310mV@(500mA) 500mA 74dB@(1MHz) Adjustable Negative PG Pin、Over Current Protection、Over Temperature Protection、Enable MSOP-12-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesUncategorisedLT3093EMSE#PBF
MSOP-12-EP-40℃~+125℃@(Tj) 0.8uVrms 0V~19.5V 1 190mV@(200mA) 2.35mA 200mA 20V 73dB@(1MHz) Adjustable Negative Under Voltage Lockout、PG Pin、Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection MSOP-12-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesUncategorisedLT3045EMSE
MSOP1220V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear RegulatorAnalog DevicesUncategorisedLT3094EMSE
MSOP12-20V, 500mA, Ultralow Noise, Ultrahigh PSRR Negative Linear RegulatorAnalog DevicesUncategorisedLT3652EMSE#PBF
UncategorisedMaxim Integrated Products
Questions
Is there a KiCad symbol and footprint for the LT3093EMSE?
Yes. The symbol is Regulator_Linear:LT3093xMSE and the footprint Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LT3093EMSE?
MSOP12, with 13 pins. Its footprint is drawn on this page.
What can replace the LT3093EMSE?
Parts like it in the library: the LT3094EMSE#PBF by Analog Devices, the LT3093EMSE#PBF by Analog Devices, the LT3045EMSE by Analog Devices and the LT3094EMSE by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.