Skip to the content
9

LT3080EDD

Analog Devices

0 To 36V Adjustable 1.1A Single Resistor Low Dropout Regulator

Part id
adi/LT3080EDD
Category
Uncategorised
Package
SON8
Pins
9
Used on
6 open-source boards

Overview

The LT3080EDD is an uncategorised made by Analog Devices in a SON8 package with 9 pins. 0 To 36V Adjustable 1.1A Single Resistor Low Dropout Regulator.

PCBKit's library has its KiCad symbol (Regulator_Linear:LT3080xDD, from KiCad's library) and its footprint (Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm, from KiCad's library), ready for a KiCad board. 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1OUT4SET5VCONTROL7IN
Regulator_Linear:LT3080xDDFrom KiCad's library

Footprint

9
Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mmFrom KiCad's library

Pinout

9
The pins of the LT3080EDD
PinNameType
1OUTPower out
2OUTPassive
3OUTPassive
4SETInput
5VCONTROLInput
6NCNot connected
7INPower in
8INPassive
9OUTPassive

Open-source boards using it

6
  • 2 layers169.3 × 128 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupply

    SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

    134 parts96
  • 2 layers50 × 100 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupplyMini

    118 parts16
  • 4 layers145 × 157 mmRear, the printed circuit board in 3D

    Rear

    JQIamo/20A-bipolar-current-source

    20A bipolar current source with water cooled sensing resistor

    99 parts2
  • 2 layers97.8 × 82.6 mmPower Supply, the printed circuit board in 3D

    Power Supply

    hxtk/Power-Supply

    Dual-limiting laboratory power supply schematic and PCB

    43 parts1
  • 2 layers160 × 100 mmPIAD-18bits, the printed circuit board in 3D

    PIAD-18bits

    lnls-sirius/SPIxCONV

    This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

    178 parts1MIT
  • 2 layers110 × 100 mmPIAD-18bits, the printed circuit board in 3D

    PIAD-18bits

    lnls-sirius/SPIxCONV

    This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

    24 parts1MIT

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the LT3080EDD?

Yes. The symbol is Regulator_Linear:LT3080xDD and the footprint Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LT3080EDD?

SON8, with 9 pins. Its footprint is drawn on this page.

What can replace the LT3080EDD?

Parts like it in the library: the LTC6362IDD by Analog Devices and the LT3092EDD by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LT3080EDD?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.