Skip to the content
12345

ADP7142AUJZ-3.3-R7

Analog DevicesExtended

-40℃~+125℃@(Ta) 1 11uVrms 200mA 200mV@(200mA) 3.3V 40V 50uA 88dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7142AUJZ-3.3-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5
In stock
2,872 at JLCPCB (C208543)
Used on
16 open-source boards

Overview

The ADP7142AUJZ-3.3-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-23-5 package with 5 pins. -40℃~+125℃@(Ta) 1 11uVrms 200mA 200mV@(200mA) 3.3V 40V 50uA 88dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7142AUJZ-3.3, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 2,872 are in stock at JLCPCB (part C208543). 16 open-source boards in 11 repositories on GitHub use it.

Symbol

1VIN2GND3EN4SENSE/ADJ5VOUT
Regulator_Linear:ADP7142AUJZ-3.3From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP7142AUJZ-3.3-R7
PinNameType
1VINPower in
2GNDPower in
3ENInput
4SENSE/ADJInput
5VOUTPower out

Open-source boards using it

16See all 16
  • 4 layers80 × 49 mmPIB, the printed circuit board in 3D

    PIB

    apexsat/payload-electrical

    PCBs for payload

    319 parts1
  • 2 layers78 × 61 mmMicromouse, the printed circuit board in 3D

    Micromouse

    F-Sakashita/Micromouse

    85 parts1
  • 2 layers20 × 108 mmMidi sync module, the printed circuit board in 3D

    Midi sync module

    lucblender/MIDI-sync-power-dev-board

    The MIDI-sync-power-dev-board is a 4hp eurorack module allowing you to get an isolated 5V, 3.3V from LDO, a sync in from 3.5mm jack and either midi input or midi output.

    41 parts1MIT
  • 2 layers88.6 × 69.9 mmExpressionController, the printed circuit board in 3D

    ExpressionController

    amonbenson/expad

    A four-jack USB MIDI adapter for expression and sustain pedals, built on a Raspberry Pi Pico 2 W. It works out what is plugged into each jack - whichever contact a pedal's wiper is on, and whether it is a potentiometer…

    147 partsMIT
  • 2 layers106 × 147.1 mmUPenn OpAmp, the printed circuit board in 3D

    UPenn OpAmp

    oats-center/iot4ag-lorawan-adc-buffer

    ADC buffer for the Dragino LoRaWAN module

    74 partsMIT
  • 2 layers21.6 × 21.6 mmSiot node temp, the printed circuit board in 3D

    Siot node temp

    simpleiot/hardware

    Hardware designs for IoT devices and sensor nodes.

    9 parts9Apache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7142AUJZ-3.3-R7?

Yes. The symbol is Regulator_Linear:ADP7142AUJZ-3.3 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7142AUJZ-3.3-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP7142AUJZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7142AUJZ-3.3-R7?

JLCPCB lists it as part C208543, with 2,872 in stock; the sellers' links on this page open their listings.

What can replace the ADP7142AUJZ-3.3-R7?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7142AUJZ-3.3-R7?

16 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.